At 6:00 PM -0700 7/12/01,
[EMAIL PROTECTED] (Lorenz wrote:
>I need to configure Cisco 2600 like a MGCP Gateway.
>I use the configuration file listed at the end of the mail.
>
>The Call Agent can receive the RSIP message and respond with ACK.
>After, the Call Agent send AUEP message but CISCO responds with an error.
>
>CISCO 2600 --> CA
> RSIP 1 *@Router MGCP 0.1
> RM: restart
>CA --> CISCO 2600
> 200 1 OK
>CA --> CISCO 2600
> AUEP 135 *@Router MGCP 0.1
>CISCO 2600 --> CA
> 510 135
>
>Probably the endpoints configuration is wrong
>In CISCO 2600 Documentation ( CISCO 2600 and 3600 Routers MGCP Voice Gateway
>Interoperability with Cisco CallManager) is not clear how to configure the
>router like a MGCP Gateway or like a Call Agent.
>Reading this document I understood CISCO can be configured both Gateway and
>Call-Agent
>Is it correct?
>Where can I find other document on this point?
>
Try 1 800 533 2447 (cisco techsupport)
We now return you to your scheduled IETF list normally pointless
arguments...
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
You can't depend on your judgement when your imagination is out of focus.
-- Mark Twain.
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
OLTECO Ari Ollikainen
P.O. BOX 20088 Networking Architecture and Technology
Stanford, CA [EMAIL PROTECTED]
94309-0088 415.517.3519
