i've found a lot of good configuration examples on cisco's web site in their
technical support area. www.cisco.com
"TRAICOVN (NW)" wrote:
> Yah, Cisco tech support is usually pretty decent. I'd try them...
>
> ____________________________________________________________________________
> * TRAICOVN ----------------------------------- http://www.traicovn.com *
> ----------------------------------------------------------------------------
>
> On Thu, 12 Jul 2001, Ari Ollikainen wrote:
>
> > At 6:00 PM -0700 7/12/01,
> > [EMAIL PROTECTED] (Lorenz wrote:
> > >I need to configure Cisco 2600 like a MGCP Gateway.
> > >I use the configuration file listed at the end of the mail.
> > >
> > >The Call Agent can receive the RSIP message and respond with ACK.
> > >After, the Call Agent send AUEP message but CISCO responds with an error.
> > >
> > >CISCO 2600 --> CA
> > > RSIP 1 *@Router MGCP 0.1
> > > RM: restart
> > >CA --> CISCO 2600
> > > 200 1 OK
> > >CA --> CISCO 2600
> > > AUEP 135 *@Router MGCP 0.1
> > >CISCO 2600 --> CA
> > > 510 135
> > >
> > >Probably the endpoints configuration is wrong
> > >In CISCO 2600 Documentation ( CISCO 2600 and 3600 Routers MGCP Voice Gateway
> > >Interoperability with Cisco CallManager) is not clear how to configure the
> > >router like a MGCP Gateway or like a Call Agent.
> > >Reading this document I understood CISCO can be configured both Gateway and
> > >Call-Agent
> > >Is it correct?
> > >Where can I find other document on this point?
> > >
> >
> > Try 1 800 533 2447 (cisco techsupport)
> >
> > We now return you to your scheduled IETF list normally pointless
> > arguments...
> >
> > _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> > You can't depend on your judgement when your imagination is out of focus.
> > -- Mark Twain.
> > _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> >
> > OLTECO Ari Ollikainen
> > P.O. BOX 20088 Networking Architecture and Technology
> > Stanford, CA [EMAIL PROTECTED]
> > 94309-0088 415.517.3519
> >
> >
