its a lan wire coming from a cable operator. so no idea of the device used here. i just create windows dialer as i mentioned below, feed in the user name and password. and then i surf..
current way using /creating broad connection on windows is to use in windows i go to network connection--> create new conection-- >connect to internet-->set up my connection manually-->connect using broad band connnection that required name and password. when the dialer is created i go to properties of dialer then networking -->internet protocol (Tcp/ip)--> obtain an IP address automatically. type of broadband connection to make :PPPOE On Aug 24, 9:57 pm, Naren Bharatwaj <[email protected]> wrote: > Every modem has an IP and one can setup automatic dialing of PPPoE > connection by hardcoding the user-id and password. The general IP for a ADSL > modem or router is 192.168.1.1 . However, this need not be same for all > routers. The IP to access the router/modem configuration will be given in > the manual. So, just type-in the IP in your browser and this allows you to > configure the modem for automatic dialing. > > Cheers, > > Naren > > On Tue, Aug 24, 2010 at 9:42 PM, Mohit Singh <[email protected]> wrote: > > > Why don't you try hardcoding the user id/password of your broadband > > > connection in your modem/router. > > > can you please elaborate on this > > > Mohit Singh > > > -- > > l...@iitd -http://tinyurl.com/ycueutm -- l...@iitd - http://tinyurl.com/ycueutm
