hi abdullah i am little busy.. but " auto lo > iface lo inet loopback" this one is not right.. any many more faults there please reconfigure once more,, if you face this problem repeatedly you can mail me morning iwill give you answer night. sure >
On Sun, May 16, 2010 at 7:12 AM, Abdullah <[email protected]>wrote: > Change the user id and password by going to the Broadband > configuration page by providing the current authentication the > section.It will work. Remember please take a backup of the current > configuration and them make changes to it. > > On 5/14/10, [email protected] <[email protected]> > wrote: > > This discussion is going off topic!!! > > > > i got the solution of actual topic. > > > > Solution: > > > > using pppoeconf configure a connection. > > after that open "/etc/ppp/peers/dsl-provider" > > add "persist" to the file > > > > > > > > > > ----------------------------/etc/ppp/peers/dsl- > > provider------------------------------ > > noipdefault > > defaultroute > > replacedefaultroute > > hide-password > > #lcp-echo-interval 30 > > #lcp-echo-failure 4 > > noauth > > persist <- this is important!!! > > #mtu 1492 > > #persist > > #maxfail 0 > > #holdoff 20 > > plugin rp-pppoe.so eth1 > > user "XXXXXXXXXXXXXX" > > #usepeerdns <- i use open-DNS so i commented > > this line > > > > ----------------------------------------------------------------------- > > > > > > > > check this file also > > --------------/etc/network/interfaces ----------------------- > > auto lo > > iface lo inet loopback > > > > > > auto dsl-provider > > iface dsl-provider inet ppp > > pre-up /sbin/ifconfig eth1 up # line maintained by pppoeconf > > provider dsl-provider > > > > auto eth1 > > iface eth1 inet manual > > > ---------------------------------------------------------------------------------------- > > > > use poff -a to end currently active connection > > pon dsl-provider to start connection > > > > > > > ******************************************************************************** > > > > > > > > > > > > Anybody have that torrent speed problem? > > i am using BSNL type 1 modem made by ITI LIMITED. > > > > Also when i am running apache web server, if the modem is configured > > to auto connect, the pages on the server are not accessible for other > > computers, when my ip is opend form another computer, it shows my > > modem configuration page. > > As the default username/passowrd is admin/admin, any one can change > > the configuration.Also azureus show a NAT problem. > > > > Any solution for this? > > > > -- > > "Freedom is the only law". > > "Freedom Unplugged" > > http://www.ilug-tvm.org > > > > You received this message because you are subscribed to the Google > > Groups "ilug-tvm" group. > > To control your subscription visit > > http://groups.google.co.in/group/ilug-tvm/subscribe > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > > > > > > > For details visit the google group page: > > http://groups.google.com/group/ilug-tvm?hl=en > > > > > -- > ---------------------- > Mohammad Abdullah > B.Tech(it),Third Year. > ---------------------- > > -- > "Freedom is the only law". > "Freedom Unplugged" > http://www.ilug-tvm.org > > You received this message because you are subscribed to the Google > Groups "ilug-tvm" group. > To control your subscription visit > http://groups.google.co.in/group/ilug-tvm/subscribe > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > > > > For details visit the google group page: > http://groups.google.com/group/ilug-tvm?hl=en > -- "Freedom is the only law". "Freedom Unplugged" http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups "ilug-tvm" group. To control your subscription visit http://groups.google.co.in/group/ilug-tvm/subscribe To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For details visit the google group page: http://groups.google.com/group/ilug-tvm?hl=en
