On Tue, Aug 25, 2009 at 3:54 PM, Dinesh Kumar Rajagopal < [email protected]> wrote:
> My Server local IP : 10.10.10.115 > > eth0 Link encap:Ethernet HWaddr 00:0C:29:64:9A:17 > inet addr:10.10.10.115 Bcast:10.10.10.254 Mask:255.255.255.0 > inet6 addr: fe80::20c:29ff:fe64:9a17/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:110659 errors:1 dropped:0 overruns:0 frame:0 > TX packets:2130 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:14792026 (14.1 MiB) TX bytes:206792 (201.9 KiB) > Interrupt:185 Base address:0x1480 > > Note: Once i have removed the local IP and changed to public IP > 67.201.12.59 > for some reason . Then i have changed to 10.10.10.115 back. > > So currently i have IP Address has : 10.10.10.115 > > I have done two test to solve . > > Test 1 > when i do following command > ssh 67.201.12.59 [Note : I have accessed from another server . but in same > network ] > > it goes to 10.10.10.115 server. > > Test 2 > I have assigned 67.201.12.59 to another and restarted network, it says > "67.201.12.59 is already in use " > > Test 3 > > I have ping 67.201.12.59 from same network it pings but when i ping from > desktop system (i.e from another network ) there is no response. > > Further , i thought there could cache in arp . but i did not found > 67.201.12.59 in it. > > what to do further ? > _______________________________________________ > To unsubscribe, email [email protected] with > "unsubscribe <password> <address>" > in the subject or body of the message. > http://www.ae.iitm.ac.in/mailman/listinfo/ilugc > I think you are looking some thing similier to http://shibuvarkala.blogspot.com/2008/10/howto-setup-second-ip-address-or.html -- ********************************** JAGANADH G http://jaganadhg.freeflux.net/blog _______________________________________________ To unsubscribe, email [email protected] with "unsubscribe <password> <address>" in the subject or body of the message. http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
