But ifconfig says only eth0 is enabled , look this
eth0 Link encap:Ethernet HWaddr 00:0C:29:64:9A:17
inet addr:10.10.10.115 Bcast:10.10.10.254 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe64:9a17/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:168125 errors:1 dropped:0 overruns:0 frame:0
TX packets:2472 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22537276 (21.4 MiB) TX bytes:227056 (221.7 KiB)
Interrupt:185 Base address:0x1480
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20293 errors:0 dropped:0 overruns:0 frame:0
TX packets:20293 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1841153 (1.7 MiB) TX bytes:1841153 (1.7 MiB)
2009/8/25 JAGANADH G <[email protected]>
> On Tue, Aug 25, 2009 at 3:54 PM, Dinesh Kumar Rajagopal <
> [email protected]> wrote:
>
> > My Server local IP : 10.10.10.115
> >
> > eth0 Link encap:Ethernet HWaddr 00:0C:29:64:9A:17
> > inet addr:10.10.10.115 Bcast:10.10.10.254 Mask:255.255.255.0
> > inet6 addr: fe80::20c:29ff:fe64:9a17/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:110659 errors:1 dropped:0 overruns:0 frame:0
> > TX packets:2130 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:14792026 (14.1 MiB) TX bytes:206792 (201.9 KiB)
> > Interrupt:185 Base address:0x1480
> >
> > Note: Once i have removed the local IP and changed to public IP
> > 67.201.12.59
> > for some reason . Then i have changed to 10.10.10.115 back.
> >
> > So currently i have IP Address has : 10.10.10.115
> >
> > I have done two test to solve .
> >
> > Test 1
> > when i do following command
> > ssh 67.201.12.59 [Note : I have accessed from another server . but in
> same
> > network ]
> >
> > it goes to 10.10.10.115 server.
> >
> > Test 2
> > I have assigned 67.201.12.59 to another and restarted network, it says
> > "67.201.12.59 is already in use "
> >
> > Test 3
> >
> > I have ping 67.201.12.59 from same network it pings but when i ping from
> > desktop system (i.e from another network ) there is no response.
> >
> > Further , i thought there could cache in arp . but i did not found
> > 67.201.12.59 in it.
> >
> > what to do further ?
> > _______________________________________________
> > To unsubscribe, email [email protected] with
> > "unsubscribe <password> <address>"
> > in the subject or body of the message.
> > http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
> >
>
> I think you are looking some thing similier to
>
> http://shibuvarkala.blogspot.com/2008/10/howto-setup-second-ip-address-or.html
>
> --
> **********************************
> JAGANADH G
> http://jaganadhg.freeflux.net/blog
> _______________________________________________
> To unsubscribe, email [email protected] with
> "unsubscribe <password> <address>"
> in the subject or body of the message.
> http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
>
_______________________________________________
To unsubscribe, email [email protected] with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
