On Saturday, August 09, 2003 1:08 PM [GMT+0800], Nitin Chandra <[EMAIL PROTECTED]> wrote:
> Hi! > every one > I want to use my tape drive for backing up data. > earlier i was using it on windus through parallel > port. If so, the port on the back of the tape box is a paralle port, will not work with SCSI. The drive inside is probabli SCSI, but the box converts. Lose the box, and plug the drive in to the SCSi card. > now i have connected it to a Advansys > (ABP940-U/ABP960-U; as shown by the hardware > browser)25pin scsi card. Now it not detecting the tape > drive. Is the card detecting the drive? Power up the drive before booting, and look in /proc/scsi Have you loaded, or compiled in, the SCSI Tape module (st.o)? You do not need ftape. -- Sanjeev _______________________________________________ ilugd mailing list [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd
