mathewcos <[EMAIL PROTECTED]> wrote:                               Hi,
 
 Thank you for the replay.
 
 >but i want to know that 
   did you set hostname also during installation ?
 
 Using DELL configuration CD we did that, IP Address and hostname, 
 mount points, mount point size ... One this done This configuration 
 CD will ask for Linux AS cds. We dont have to input anythig from here 
 onwards, just insert Cds one by one.
 
ok , then you might want to check if you have specified hostname in the dell 
configuration, 
does that get saved and shows the same after installation. 

if not set the hostname again . 


>partitioning, It does ask , if you want the IP address to set up 
 manuall or through DHCP,  and in 
 
 It doesn't ask any DHCP while istallation.
 
 Regards,
 Mathew
 
 --- In [email protected], Ashok <[EMAIL PROTECTED]> wrote:
 >
 > 
 > 
 > mathewcos <[EMAIL PROTECTED]> wrote:                               Hi,
 >  
 >  Thank you for the replay.
 >  
 >  > You have eariler mentioned that at the time of installation you 
 >  have set ip address as "192.168.107.211" , but i want to know that 
 >  did you set hostname also during installation ?
 >  
 >  Actually we are seeting up the initial configuration using a DELL 
 >  configuration cd. We set IP address, hostname while using that CD.
 >  Then after configuration, the installation cd will as for RH Linuc 
 >  AS4 cds one by one. At the time of installation of linux OS it is 
 not
 >  asking any inputs.
 > 
 > As far as i have seen, When RHEL 4 AS installation begins, After 
 the disk druid screen and 
 > 
 > partitioning, It does ask , if you want the IP address to set up 
 manuall or through DHCP,  and in 
 > 
 > the same screen below is where, you have whether hostname is to be 
 set automatically from DHCP or manually. There you can set up 
 hostname manuall. 
 > 
 > 
 > 
 > 
 > If no hostname is set and if dhcp is not giving any hostname, then 
 i guess the default hostname set is "localhost.localdomain". 
 > 
 > 
 > 
 > 
 > 
 > 
 > 
 > 
 > 
 > 
 > 
 >  
 >  Regards,
 >  Mathew
 >  
 >  --- In [email protected], "M.R. Niranjan" <mrashok80@> wrote:
 >  >
 >  > 
 >  > 
 >  > mathewcos <mathewcos@> wrote:                               Hi,
 >  >  
 >  >  Thank you for the replay.
 >  >  [EMAIL PROTECTED] ~]# hostname
 >  >  dbserver
 >  >  [EMAIL PROTECTED] ~]# cat /etc/sysconfig/network
 >  >  NETWORKING=yes
 >  >  HOSTNAME=dbserver
 >  >  GATEWAY=192.168.107.253
 >  >  [EMAIL PROTECTED] ~]#
 >  > Ok,  I have no knowledge of oracle,  But this is my guess 
 >  > 
 >  > When installing oracle, either the hostname 
 >  was "localhost.localdomain"   and may  be the 
 >  > 
 >  > hostname was changed to "dbserver" afterwards.
 >  > 
 >  > You have eariler mentioned that at the time of installation you 
 >  have set ip address as "192.168.107.211" , but i want to know that 
 >  did you set hostname also during installation ?
 >  > Thanks
 >  > ashok
 >  > 
 >  > 
 >  > 
 >  > Because my idea is even 
 >  > 
 >  >  No other information is added to host file.
 >  >  
 >  >  Regards,
 >  >  Mathew
 >  >  
 >  >  --- In [email protected], "M.R. Niranjan" <mrashok80@> 
 wrote:
 >  >  >
 >  >  > 
 >  >  > 
 >  >  > mathewcos <mathewcos@> wrote:                               
 Hi,
 >  >  >  
 >  >  >  I am working in Redhat Linux AS 4.
 >  >  >  IP Adress assigned at the time of installation is 
 >  192.168.107.211
 >  >  >  
 >  >  >  My host file is like this. 
 >  >  >  
 >  >  >  #cat /ect/hosts
 >  >  >  
 >  >  >  # Do not remove the following line, or various programs
 >  >  >  # that require network functionality will fail.
 >  >  >  127.0.0.1 localhost.localdomain localhost dbserver
 >  >  >  
 >  >  >  I installed Oracle10g in this machine.
 >  >  >  
 >  >  >  The following information I can viw after installation on 
 >  oracle 
 >  >  >  enterprise management console.
 >  >  >  
 >  >  >  Status  Up 
 >  >  >  Up Since  Feb 7, 2008 6:39:01 PM IST 
 >  >  >  Availability (%)  36 
 >  >  >   
 >  >  >    ( Last 24 hours ) 
 >  >  >   
 >  >  >  Instance Name  OEMREP 
 >  >  >  Version  10.2.0.1.0 
 >  >  >  Read Only  No 
 >  >  >  Oracle Home  /home/app/oracle10gdb/product/10.2.0/db_1 
 >  >  >  Host  localhost.localdomain 
 >  >  >  Listener  
 >  >  >  
 >  >  >  Why hostname is displayed as 'localhost.localdomain ' 
 instead 
 >  >  >  of 'dbserver'?
 >  >  >  
 >  >  > what is hostname set ?
 >  >  > #hostname
 >  >  > Is the output of hostname command and 
 >  >  > 
 >  >  > "HOSTNAME" in /etc/sysconfig/network 
 >  >  > same ?
 >  >  > 
 >  >  > 
 >  >  >  Any other information i have to add in host file?
 >  >  >  
 >  >  >  Please help me to solve this.
 >  >  >  
 >  >  >  
 >  >  >      
 >  >  >                                
 >  >  > 
 >  >  >        
 >  >  > ---------------------------------
 >  >  > Looking for last minute shopping deals?  Find them fast with 
 >  Yahoo! 
 >  >  Search.
 >  >  > 
 >  >  > [Non-text portions of this message have been removed]
 >  >  >
 >  >  
 >  >  
 >  >      
 >  >                                
 >  > 
 >  >        
 >  > ---------------------------------
 >  > Be a better friend, newshound, and know-it-all with Yahoo! 
 Mobile.  
 >  Try it now.
 >  > 
 >  > [Non-text portions of this message have been removed]
 >  >
 >  
 >  
 >      
 >                                
 > 
 >        
 > ---------------------------------
 > Never miss a thing.   Make Yahoo your homepage.
 > 
 > [Non-text portions of this message have been removed]
 >
 
 
     
                               

       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

[Non-text portions of this message have been removed]

Reply via email to