On 10/6/02 5:29 am, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote:
> Thanks for all the great information RE: Rev 1 & 2 power supplies. just > one more question though. The Rev D iMacs changed the chassis, right? > The bottom cover is different. The cover is there for the VGA connector, > etc. I assume the configuration changed for the Power supply too, correct? > Thanks again for the help. > > John Belen > The rev. a to d were all tray loading and had the bottom cover with a handle and and single screw. The models that followed stopped using the rev. letters. The later slot loading models had flaps in the base for memory access and another cover that on some models could access and external port for video mirroring. The design was completely different, what was 2 boards on the older iMacs became one, known as the power/analog/video board, all boards have no compatibility with older models. Steve Bell -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
