Note: An Ethernet Crossover cable is NOT the same as a standard Ethernet cable; It MUST say "Crossover" on it or the packaging. Works great, once you get File Sharing all set up on both machines.
Gerry on 8/25/02 3:36 PM, Jack Russell at [EMAIL PROTECTED] wrote: > > On Sunday, August 25, 2002, at 12:03 PM, Renaat Van Hoof wrote: > >> I want to connect my iMacDV (400 Mhz) with my Power Macintosh 7200/90. >> Is >> this difficult? and how can I do this? Are there good (Dutch) site's >> explaining this? > > I don't know about Dutch sites, but it's a pretty straight forward > proposition. You just need an ethernet cross over cable and the sharing > software built into the Mac's. If both machines are running OS X you do > it with the "Network" control panel in system preferences. > > If you running OS 9 or earlier then it's really easy using the users and > groups and file sharing, file linking controls. Setting up a two Mac > network is one of Mac's historic, great, built in capabilities. > > Jack Russell > -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
