On Aug 22, 2004, at 9:49 AM, Jim Dynes wrote:
I bought a 400 sl for $ 100.00 from work. It wouldn't boot & it had a
clanging sound so I figured a bad HD. I replaced the HD & the CD drive. It
has a dvd drive so I put that in my older one. Anyway, it sounds like it is
booting (by the sound of the HD) but the screen stays blank.
I have tried booting off the hard drive & the CD drive and by the sounds
they make it sounds like it is booting just fine but no screen.
I re-set the pmu still no results.
Any suggestions?
Jim
--
If it's a DV model it should have a video out on back. Connect it to another model and see if it needs a firmware upgrade. That is usually the case if you are using OS X on Imac and haven't done firmware updates..
Jerry
-- The iMac List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
