Those 2 revisions are similar, as long as the 2 have nearly or exactly identical components such as firewire, ability for airport, basically as long as the 2 logic boards look the same, then you're good to go. If you're swapping out on something that one logic board has and the other doesn't, then you might have boot problems and IDE detection problems. It seems to me, however you should be fine.
On Mon, Mar 7, 2011 at 8:58 PM, Zeke <[email protected]> wrote: > Lets see if I can make this clear as mud. > > The bottom of the 600 Mhz iMac SE (G3) says: 600/GR/128/40/CDRW/RUltra/ > 56k/FW/VGA/APR with serial number RN1093DVKLB > > The bottom of the 500 Mhz iMac (G3) says: 500/SN/128/20/CDRW/ULTRA/56k/ > VGA with serial number P112513TLFB > > Good info? > > Yours, > > Zeke -- You received this message because you are a member of the iMac Group, a group for those using Apple iMacs and eMacs. The list FAQ is at http://lowendmac.com/imac/list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/imaclist
