Kevin got into the zone.
I was hungover like a horse, but that's not an excuse.
next time, I shall be ready!
At 10:44 AM 9/17/99 -0500, you wrote:
>I had at one time thought of doing this.... vaguely remember thinking
>bpclient was expecting something from the modem that direct connection
>couldn't give...
>If you could find out what it needed you could probably strap those signals.
>Of course the terminal could be looking for something also.
>
>Not much help I know, but maybe a direction to look.
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of System
>Administrator
>Sent: Friday, September 17, 1999 9:53 AM
>To: Imail Forum
>Subject: [IMail Forum] Direct Serial Connection using email to pager
>
>
>Hi guys,
>
> Just wondering if anyone out there has a dedicated serial
> connection (no
>modem involved)to a paging terminal successfully. I've got the connection
>going using only the send, receive, and ground wires. I've crossed over the
>send and receive - but I'm not using the CTS/RTS wires at all. I can open
>up a hyperterminal session directly to the port and manually send a
>successful page, but I can't get email to pager to function right.
> I've set the SMTP service to interact with the desktop, and this
> allows me
>to view the pager/beeper server - here's what I get:
>
>Init="ATE0Q0V1X4"
>Phone="NULL"
>Pwd=""
>szID="2336552"
>szMsg="System Administrator: test msg "
>nAlphaPort=1
>nAlphaBaud=1
>nAlphaProtocol=1
>(sGNI.dwFlags & 8)=0
>Sending message to 2336552 via NULL on COM1
>open error 5
>12582924 thread exiting to retry
>
>Any ideas?
>
>__________________________________
>Justin Ellison
>System Administrator
>InternetUSA
>[EMAIL PROTECTED]
>http://nebi.com
>800-603-3502
>
>Please visit http://www.ipswitch.com/support/mailing-lists.html
>to be removed from this list.
>
>Please visit http://www.ipswitch.com/support/mailing-lists.html
>to be removed from this list.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
