Thanks - off to explore these options :-)
----- Original Message -----
From: ## Dusty Carden <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 05, 1999 10:28 PM
Subject: Re: [IMail Forum] Using imail for a satellite office
> Again there are a couple of ways you could do this.
>
> Scenario one. (I have one client doing this now)
> Use a utility such as EFS Forwarding Server http://www.chimera.co.nz/
> It is free and easy to set up. Set up a virtual domain for the remote
> office. Use the nobody alias to point all mail to one userid in this
> virtual domain. Do not set up the actual users in the domain. Only
> the nobody alias and one box, we will call it incoming.
>
> Point the EFS server to retrieve mail from incoming@virtualdomain
> and distribute it to your MS Mail users.
>
> Scenario Two. Although the above would work for them also, if
> they have a static IP then you could simply set up store and forward
> for them by only entering their hostname and IP address in the hosts
> record. (Winnt/System32/Drivers/Etc/hosts) If they do not have a
> static IP then the above would work for them also.
>
> Dusty
>
> ----- Original Message -----
> From: Joe Halloran <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, October 05, 1999 5:24 PM
> Subject: Re: [IMail Forum] Using imail for a satellite office
>
>
> > Thanks Dusty
> >
> > - more questions - for anyone who has answers :-)
> >
> > here is the scenario
> >
> > The satellite office has about 20 users. They are using MS Mail on
their
> > network. They have a standard dial up connection with a local isp, set
up
> > with one mailbox. How do we set them up so that they can use our mail
> > server?
> >
> >
> > scenario two
> >
> > As above, but instead of the isp dial-up, they call directly into our
> > mailserver over an analog connection.
>
>
> Please visit http://www.ipswitch.com/support/mailing-lists.html
> to be removed from this list.
>
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
