Jonathon,
When changing the IP or HostName under NT, it does not reliably update the
HOSTS file. Open Notepad, then File Open: \winnt\system32\drivers\etc\hosts
(no extension). It should show the loopback address on one line, then your
NEW ip and the hostname on another line. (probably find the OLD IP,
instead). Make sure there is <CRLF> at the end of the file, or last line
will not be 'readable'.
Daniel Donnelly
Ipswitch Technical Support
________________________________________________________
See our Knowledge Base at http://support.ipswitch.com/kb
----- Original Message -----
From: "Jonathan Waldchen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 09, 2000 3:27 PM
Subject: [IMail Forum] TCP-1 Errors
> I just installed 2 new servers: a new DNS server and a new WEB HOSTING
> server. Both seem to be up and running fine for 3 days now. However, at
the
> same time I installed these servers, I also changed the IP of my existing
> Imail 6.03 server. Now when I go to the Web Admin page, I get a TCP-1
error
> on both service (DNS and Web). I checked the settings in Imail Admin and
> even stopped and re-started the monitor service. The only settings I
changed
> when moving the IP address was in the Imail Adminitsrator and the one
> setting in the Registry. Have I overlooked anything here? Has anyone run
> into this before?
>
>
> Jonathan Waldchen
> SurrealNET Corporation
>
> Please visit http://www.ipswitch.com/support/mailing-lists.html
> to be removed from this list.
>
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
