You're absolutely right! This does do the trick. Only question left (at least regarding this topic) what possible security 'leaks' do I create, by leaving all UDP ports open?
Do you know? Tim van den Hoff > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]Namens R. Scott Perry > Verzonden: donderdag 18 april 2002 1:00 > Aan: [EMAIL PROTECTED] > Onderwerp: RE: [IMail Forum] TCP/IP filtering > > > > >When I don't use tcp/ip filtering the DNS test fully functions, > if I use it > >and list port 53 tcp and udp it doesn't... > > Are you allowing both incoming and outgoing port 53 packets? > > If you are using Windows 2000, you may need to set it up to > permit all UDP > packets. I tried setting up the TCP/IP filtering in Windows 2000 > once for > DNS, and I believe that it wouldn't allow the incoming port 53 > UDP packets > unless you have it set to all all UDP packets. > > -Scott > --- > Declude: Anti-virus, Anti-spam and Anti-hijacking solutions for > IMail. http://www.declude.com > > --- > [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Please visit the Knowledge Base for answers to frequently asked questions: http://www.ipswitch.com/support/IMail/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Please visit the Knowledge Base for answers to frequently asked questions: http://www.ipswitch.com/support/IMail/
