Common Bron, Ellie, mates :) any advise?
Cheers :) :)
---
EGOITZ AURREKOETXEA
Departamento de sistemas
944 209 470
Parque Tecnológico. Edificio 103
48170 Zamudio (Bizkaia)
ego...@sarenet.es
www.sarenet.es [1]
Antes de imprimir este correo electrónico piense si es necesario
hacerlo.
El 13-12-2018 19:25, Egoitz Aurrekoetxea escribió:
> Hi again!
>
> Else as a simplication way can you replicate any manner a 2.3 with some newer
> version?. At least in manual mode (not rolling)?.
>
> Cheers.
>
> ---
>
> EGOITZ AURREKOETXEA
> Departamento de sistemas
> 944 209 470
> Parque Tecnológico. Edificio 103
> 48170 Zamudio (Bizkaia)
> ego...@sarenet.es
> www.sarenet.es [1]
> Antes de imprimir este correo electrónico piense si es necesario hacerlo.
>
> El 13-12-2018 16:52, Egoitz Aurrekoetxea escribió:
>
>> Good afternoon,
>>
>> I was trying to upgrade part of our Cyrus imap installation, concretely that
>> one consisting in still 2.3. I was planning to set up Cyrus 3.0. I have seen
>> all works properly except for the unexpunge command because as someone
>> stated here, a reconstruct -V max was needed.The problem is that this
>> reconstruct command, takes ages and I'm not able to keep the service offline
>> so many time. So I have been thinking in the following scenario :
>>
>> - Cyrus 2.3 master -> Cyrus 2.4 slave
>>
>> Get this 2.4 slave ready and set it as master. But here comes my first
>> doubt. Does the 2.4 replication work with the 2.3 replication?. Can in this
>> pair, both (the 2.3 and the 2.4) be both master and slave?. I mean to switch
>> roles in the pair. Make one become master and the other slave and vice
>> versa?.
>>
>> Let's think now Cyrus 2.4 is ready and working.
>>
>> - Now, I would set up a new 3.0 slave. I know 2.4 could replicate with 3.0.
>> So I would get the 3.0 ready and then set 3.0 as master. Can in this pair
>> both the 2.4 and 3.0 be master and slave?. Meaning again to the same role
>> switching commented before... to make one to be master and the other slave
>> or vice versa....
>>
>> I'l will end up with 2 3.0 master and slave... but I need to trace the
>> path...
>>
>> Does anyone see any other way?.
>>
>> Best regards,
>>
>> -
>>
>> --
>>
>> EGOITZ AURREKOETXEA
>> Departamento de sistemas
>> 944 209 470
>> Parque Tecnológico. Edificio 103
>> 48170 Zamudio (Bizkaia)
>> ego...@sarenet.es
>> www.sarenet.es [1]
>> Antes de imprimir este correo electrónico piense si es necesario hacerlo.
>> ----
>> Cyrus Home Page: http://www.cyrusimap.org/
>> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
>> To Unsubscribe:
>> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
>
> ----
> Cyrus Home Page: http://www.cyrusimap.org/
> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
> To Unsubscribe:
> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
Links:
------
[1] http://www.sarenet.es
----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
