Hi,
You may want to look at https://github.com/thsmi/sieve.
Regards,
Łukasz
On 3/13/25 11:43 AM, whitepj via Info wrote:
Hi All,
Apologies for posting what are probably basic FAQs - please point me
to relevant HOWTO webpages if available. _*Background*_/_:_/ After an
embarrassingly "more than 2 days", I have finally got a basic instance
of Cyrus IMAP working. I am now able to receive emails, and to view
messages in a client. My next test involves enabling sieve scripts --
but I don't seem to be able to find a lot of info about how to set up,
test, administer and maintain. That said, I have never used sieve
scripts before.
There are a couple of posts on this list that I've found:
https://cyrus.topicbox.com/groups/info/T9b1dfc1611f58964
https://cyrus.topicbox.com/groups/info/Tbfa58387b6aa5356
The 1st appearing the most helpful -- but I haven't been able to use
this info to resolve the issue. Like the original poster, I find that
there is sparse information appearing to help me debug the issue, and
point to where I have gone wrong.
My sieve script is below (I've tried two versions: plain, and then
with the attempted debugging as per previous thread). This was then
uploaded and installed using the following cmd.
sieveshell --user=<user> --realm=<virtual_domain> --password=<pass>
192.168.1.2
> put test.sieve
> activate test.sieve
> list
test.sieve <- active script
> quit
test email then submitted via exim, delivered through lmtp, and viewed
in email client. However, I am not receiving any copy email forwarded
by the sieve. Don't know whether this is because the sieve is not
being run, or if it is, but cannot send. Syslog only shows the
lmtpunix lines 'Delivered:', and 'USAGE'.
As a side issue (included only because it may indicate something
relevant, not as a plea for help), I have gyrus installed on a
separate laptop. Whilst I can log in as 'cyrus' (designated as an
admin, with no mailbox set up), it shows almost nothing. Users is
'greyed out' with a count of zero, as is most everything else. Logging
in as a regular user with a mailbox gives the same result.
Can anyone give pointers on how I complete this, and get working please?
*_test.sieve_*
require "vnd.cyrus.log";
log "Script starting!";
if true {
redirect "user@ <mailto:[email protected]>another_domain.com";
keep;
}
log "Script ending.";
*Cyrus <https://cyrus.topicbox.com/latest>* / Info / see discussions
<https://cyrus.topicbox.com/groups/info> + participants
<https://cyrus.topicbox.com/groups/info/members> + delivery options
<https://cyrus.topicbox.com/groups/info/subscription> Permalink
<https://cyrus.topicbox.com/groups/info/T81451bd9b40fd943-M10b6c238bf66d2517ef2dffe>
------------------------------------------
Cyrus: Info
Permalink:
https://cyrus.topicbox.com/groups/info/T81451bd9b40fd943-Mbc2867532025cd632ea060ef
Delivery options: https://cyrus.topicbox.com/groups/info/subscription
