|
Thanks howie, works a treat!
One
final question!
If I
put plian text in the text text message field and HTML in the HTML field will
this work correctly with ALL email clients. No html will appear in non-html
clients.
I
expect this to be the case just confirming before I start to use this
feature.
Thanks again
Richard
-----Original
Message-----
From: Howie Hamlin
[mailto:[EMAIL PROTECTED]]
Sent: 11 January 2001
16:23
To: inFusion Support List
Subject: Re: [iMS] CF and
ims
NOt sure why it dodn't work. I reset your
license in our key server. Please open up the following:
Start>Programs>inFusion Mail
Server>Register Serial Number
The existing serial number should be in ther (if
not, retype it from the email that has the serial number in it).
Click on the Send button.
You should then see a message about the license
validity.
Stop all iMS services.
Configure one or more DNS Servers in the POST
Server settings.
Start the POST Service.
You should then be good to go...
Regards,
Howie
----- Original Message -----
Sent: Thursday, January 11, 2001 11:21
AM
Subject: RE: [iMS] CF and ims
Howie,
The ip address of the machine in question is 212.229.102.241. Also,
do i need the smtp or pop modules to send from cf?
cheers
Richard
Send me the IP address of the machine
off-list and I'll get this straightened out. BTW - the POST-SE
license is for the POST Server and does not include the SMTP, POP or
Scheduler.
Regards,
Howie
----- Original Message -----
Sent: Thursday, January 11, 2001
10:45 AM
Subject: RE: [iMS] CF and ims
Hi Howie,
I've attached al the logs I could find. In the logs it says i'm
not registered, I d/led free version from site and added reg no given
:-(
Is this why it doesn't work?!!!!
I've registered the software and it says I'm registered - any
ideas?
Thanks
Richard
Send me the log fiile off-list. I
can tell what's going on from that.
Regards,
Howie
----- Original Message -----
Sent: Thursday, January 11,
2001 8:08 AM
Subject: [iMS] CF and ims
Hi I
have installed the free imsmail software on our server. I want to
use this with coldfusion to create a simple mailing list app. I have
registered the cfx tag in cf and the tag runs fine when I try to
send a test email that uses the tag (similar to sample one in docs.
but with my email address in the to field) the page runs fine but I
get no email delivered.
I
suspect the imsmail server needs configuring. We use exhange 5.5 and
I need the mail server to send the mail here and on to the internet
or internally.
As I
say the cf tag seems to work fine but the mail server appears
to not be send the mail on to exchange, any clues? Not too hot on
imail servers etc!!
Thanks
Richard
Moger
|
