I can not connect, but you say i don't need to have it running, so i guess
that's ok.
So, the only thing i need to have configured, is the POST tab? SMTP and
RELAY can be un configured/left out?
At 10:13 AM 1/8/02 -0500, you wrote:
>----- Original Message -----
>From: "Yury Shteyn" <[EMAIL PROTECTED]>
>To: "inFusion Support List" <[EMAIL PROTECTED]>
>Sent: Tuesday, January 08, 2002 10:10 AM
>Subject: Re: [iMS] Slow transfer
>
>
> > ok, so what does the IMS's POST service uses to send mail out it's own
> SMTP
> > service?
> >
>
>iMS does not need an SMTP listener to send mail - it connects to the
>remote SMTP server.
>
> > right now i have iMS SMTP configured to use my server IP with port 2525,
> > please see the dump below, but when i do netstat -an, i do not see port
> > 2525 listening. Is that ok?
> >
>
>If the SMTP server is listening on that port you should be able to telnet
>into it and see the iMS preamble message.
>
>Howie
>
==^=======================================================
This list server is Powered by iMS
"The Swiss Army Knife of Mail Servers"
--------------------------------------
To leave this list please complete the form at
http://www.coolfusion.com/iMSSupport.cfm
Need an iMS Developer license? Sign up for a free license here:
http://www.coolfusion.com/iMSDevelopers.cfm
List archives: http://www.mail-archive.com/infusion-email%40eoscape.com/
Note: You are subscribed as [email protected]
==^=======================================================
