Please open the configurator and send us the configuration dump. Put my name in the notes so that the mail gets to me.
Thanks, Howie ----- Original Message ----- From: "Jason Bailey" <[EMAIL PROTECTED]> To: "inFusion Support List" <[EMAIL PROTECTED]> Sent: Tuesday, January 07, 2003 11:41 AM Subject: [iMS] RE: [imps] Bounce Back Detection > Used the test console and received the following: > 550 License Expired > Error=10004 > > I take it that would be problem found? How can I resolve this quickly with > you folks (our serial is 21918590-8357)? > > -----Original Message----- > From: Howie Hamlin [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 06, 2003 7:14 PM > To: inFusion Support List > Subject: Re: [iMS] Bounce Back Detection > > > If you are using the bounce server then the address must begin with > "Bounce-" (the hyphen matters). > > Also, there needs to be a valid MX that points to the server - for example, > if you have a domain called domain.com and > you have an MX pointing to a mail server (mail.domain.com) you can also set > up an MX for bounce.domain.com and have the > bounces addressed to "[EMAIL PROTECTED]" > > One other thing - you should try using the SMTP test console or telnet to > port 25 of the bounce server and make sure > that it accepts mail to a bounce address. > > HTH, > > Howie > > ----- Original Message ----- > From: "Jason Bailey" <[EMAIL PROTECTED]> > To: "inFusion Support List" <[EMAIL PROTECTED]> > Sent: Monday, January 06, 2003 6:44 PM > Subject: RE: [iMS] Bounce Back Detection > > > > Howie, > > > > Having no luck registering bounces. Here's what I have: > > > > 1. SMTP service is running > > 2. SMTPfrom and Header_return_path = [EMAIL PROTECTED] where > > mailreturns.com is pointing to the IP of the mail server > > 3. data template contains <cflog text="#SMTPName#" file="Email_Engine"> > > > > When sending to a known bad address that sends back a bounce notification, > I > > am not seeing an entry made to the log file.I'm assuming that it is not > > being called. Also, the iMS SMTP log shows no activity. > > > > Suggestions? > > > > -----Original Message----- > > From: Howie Hamlin [mailto:[EMAIL PROTECTED]] > > Sent: Friday, November 15, 2002 9:56 AM > > To: inFusion Support List > > Subject: Re: [iMS] Bounce Back Detection > > > > > > For bounce detection I would suggest that you send the email from an > address > > that begins with the word "bounce-" and > > that the characters after those letters be something that you can parse to > > determine the address of the original > > recipient. To do this - set both the SMTPFROM and HEADER_Return_path as > the > > bounce address. Then, in your SMTP > > templates, you can check the SMTPNAME or SMTPFROM and parse out the > > information that you need. > > > > HTH, > > > > Howie > > > > ----- Original Message ----- > > From: "Doug Moore" <[EMAIL PROTECTED]> > > To: "inFusion Support List" <[EMAIL PROTECTED]> > > Sent: Friday, November 15, 2002 10:30 AM > > Subject: [iMS] Bounce Back Detection > > > > > > > Can anyone point me to where in the documentation it tells you how to > > detect > > > a bounce back? I don't seem to see much information.. I don't care what > > the > > > bounce back is for, I just want to perform a task when an email is > > > returned.. ==^======================================================= This list server is Powered by iMS "The Swiss Army Knife of Mail Servers" -------------------------------------- To leave this list please complete the form at http://www.coolfusion.com/iMSSupport.cfm Need an iMS Developer license? Sign up for a free license here: http://www.coolfusion.com/iMSDevelopers.cfm List archives: http://www.mail-archive.com/infusion-email%40eoscape.com/ Note: You are subscribed as [email protected] ==^=======================================================
