>From the manual:
inFusion Scheduler uses the Param and Value settings to verify that the template
execution was successful. If you omit
these settings then the server will always consider the result to be successful. It is
highly recommended that you use
the Param and Value settings in the templates that you call as this will ensure
maximum reliability.
HTH,
Howie
----- Original Message -----
From: "Marc Lichtenfeld" <[EMAIL PROTECTED]>
To: "inFusion Support List" <[EMAIL PROTECTED]>
Sent: Friday, February 21, 2003 10:55 AM
Subject: RE: [iMS] Scheduler Woes
Greg,
I noticed that you have <CFSetting EnableCFOutputOnly="NO"> in your code but not
<CFSetting EnableCFOutputOnly="Yes">.
You may want to include the missing tag at the top.
I have found it helpful to use <CFOUTPUT><inlog text=""></CFOUTPUT> for and enter info
for debugging. This puts the
debugging info right into the scheduler logs and makes it a lot easier to follow the
time line as opposed to entering
data into another file.
Howie, are the PARAM and VALUE parameters needed for the GetEvents call or do those
default to "result" and "ok"?
Marc
------------------------------------------------------
Marc Lichtenfeld
Senior Programmer/Technology Lead
www.bigdough.com
==^=======================================================
This list server is Powered by iMS
"The Swiss Army Knife of Mail Servers"
--------------------------------------
To leave this list please complete the form at
http://www.coolfusion.com/iMSSupport.cfm
Need an iMS Developer license? Sign up for a free license here:
http://www.coolfusion.com/iMSDevelopers.cfm
List archives: http://www.mail-archive.com/infusion-email%40eoscape.com/
Note: You are subscribed as [email protected]
==^=======================================================
