On Tue, 3 Nov 1998, Peter Bailey wrote:
> Woo.. hold up. PCMCIA cards don't use the bios serial setting.
> I'm not sure at all why that would do anything except maybe that when you
> had serial enabled in the bios, it assigned the serial connector on the
> back of the computer to cua0 regardless of anything plugged in. Then when
> you plugged the modem card in, it assigned it to cua1, but when it was on
> auto and nothing was in the plug, it assigned modem to cua0. I'm willing
> to bet that if you set it to serial disabled, it will work fine. That
> will exclude you from using that serial connector on the back of the
> computer though. It's also possible that win98 will just use your serial
> port anyway. That should be fine. Now that I think about it though, it
> might not make any difference. Try it though. Come to think of it even
> more it really makes no sense unless your card services is old and doesn't
> realize your card is a modem. Maybe if it's a combo card? Card services
> should make a link from /dev/cua[modem] to /dev/modem. Mine is linked to
> /dev/cua1 because I have my serial port enabled and a mouse plugged in.
> There's maybe a workaround there if that's the problem. Try soft linking
> /dev/cua1 /dev/modem, see if that works, then try /dev/cua0 /dev/modem and
> see if that works. If that's the case, go download the newest
> cardservices and compile the beast. That should clear it up.
> It sure would be a hell of a lot easier just have responses to
> these questions because I'm going off on every tangent I can think of.
> Anyway, if none of that works, let us know what serial port it's on, if
> it's a warm boot only thing of if after installing things in windows it
> takes over from cold boot. When does it work? If it does work in Linux
> at all go type cardctl config and check the irq it's running on. Then go
> to when it doesn't work and check the irq. If they are different it's a
> warm boot only condition and you'll just have to rid your computer of
> win98 alltogether. I imagine that with a laptop there's not much turning
> off that goes on anyway(at least for me, of course all I'm running is
> linux), but still it seems like you probably just warm boot a lot right?
> Okay, I'm done
Almost
If you want to use your serial port on the back of your computer, just set
the serial enabled, then do 'rm /dev/modem' and 'ls -s /dev/cua1
/dev/modem' and I'm almost sure(heh, almost, I know so little about your
computer) that will work.
Okay, NOW I'm really done
>
>
> On Tue, 3 Nov 1998, Lee Ko wrote:
>
> > I installed TurboLinux on my I7k with a 3Com PCMCIA modem some time
> > ago.
> > At first, Linux could not see the modem. Then I changed the bios serial
> > port
> > setting from "enabled" to "auto", then the modem worked fine on both
> > Linux
> > and Win98. Later, I tried out connecting the system, under Win98, to
> > several
> > external stuffs, monitor, mouse and printer. Afterward, Linux could not
> > see
> > the modem again. Anyone knowledgeable enough to know what might have
> > happened
> > and how to fix it?
> >
> > Lee Ko
> >
> > ---
> > http://nts.ml.org
> > FAQ: http://www.ps.uci.edu/~tomba/inspiron/
> > http://nts.ml.org/inspiron/
> > List Archives: http://nts.ml.org/inspiron/maillist.html
> > To unsubscribe send a message to: [EMAIL PROTECTED]
> > List administrator: [EMAIL PROTECTED]
> >
> >
>
>
> ---
> http://nts.ml.org
> FAQ: http://www.ps.uci.edu/~tomba/inspiron/
> http://nts.ml.org/inspiron/
> List Archives: http://nts.ml.org/inspiron/maillist.html
> To unsubscribe send a message to: [EMAIL PROTECTED]
> List administrator: [EMAIL PROTECTED]
>
>
---
http://nts.ml.org
FAQ: http://www.ps.uci.edu/~tomba/inspiron/
http://nts.ml.org/inspiron/
List Archives: http://nts.ml.org/inspiron/maillist.html
To unsubscribe send a message to: [EMAIL PROTECTED]
List administrator: [EMAIL PROTECTED]
