My hardware:
motherboard: ITOX CP330-NRM (QM57 chipset)
CPU: Intel i7-620m
video display: VGA monitor connected to VGA port on motherboard
Kernel version 2.6.37.
A kernel compiled with AGP support with Intel AGP driver, and DRI
support enabled with no drivers, boots. X will not run with device
driver set to intel ("no mode switching driver found"), but it will
run with the driver set to vesa.
A kernel compiled with AGP support for Intel, and DRI support with the
Intel i915 driver with modeswitching enabled, crashes immediately
after LILO: I select the kernel to boot, there is a message about BIOS
checking, the screen blanks for an instant, and then the tail end of
kernel crash debugging information is displayed, with numerous
references to i915.
A kernel compiled with AGP support for Intel, and DRI support with the
Intel i915 and i830 drivers compiled as modules, boots just fine.
However, running modprobe i915 produces a series of kernel error
announcments. After a fresh reboot, running startx with the intel
Xwindows driver, without attempting to load the i915 module manually,
results in a blank screen and an unkillable X process.
Is the QM57 chipset with the i7 mobile processor supported by the
Intel DRI kernel drivers?
Is this a known problem?
What additional information do you need from me to help diagnose this
problem?
--
[email protected] John Stimson
http://www.idsfa.net/~john/ HMC Physics '94
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
