Dear All.
I have Opensuse 11.1 and the output of fbset -i gives me:
mode "1024x768-76"
# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz
geometry 1024 768 1024 768 32
timings 12714 128 32 16 4 128 4
rgba 8/16,8/8,8/0,8/24
endmode
Frame buffer device information:
Name : VESA VGA
Address : 0xa0000000
Size : 8060928
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 0
YPanStep : 0
YWrapStep : 0
LineLength : 4096
Accelerator : No
I am not sure that it is right but at least I have timings.
On Fedora I got:
mode "1024x768"
geometry 1024 768 1024 768 32
timings 0 0 0 0 0 0 0
accel true
rgba 8/16,8/8,8/0,0/0
endmode
Frame buffer device information:
Name : inteldrmfb
Address : 0xa0020000
Size : 3145728
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 0
LineLength : 4096
Accelerator : No
As you can see - no timing at all.
And when I tried to set some mode from fb.modes, all I got is:
Opening frame buffer device `/dev/fb0'
Reading mode database from file `/etc/fb.modes'
Using video mode `1024x768-60'
Setting video mode to `/dev/fb0'
ioctl FBIOPUT_VSCREENINFO: Invalid argument
Could someone explain me please, if fbset should show timing in its output and
also can one change console resolution with it now?
Thanks.
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
