PCH eDP has many of the same needs as regular PCH DP connections,
including the DP_CTl bit settings, the TRANS_DP_CTL register.
Signed-off-by: Keith Packard <kei...@keithp.com>
---
drivers/gpu/drm/i915/intel_display.c | 3 +-
drivers/gpu/drm/i915/intel_dp.c | 112 ++++++++++++++++++++++++----------
2 files changed, 81 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 9fa342e..53eb29e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
/* For PCH DP, enable TRANS_DP_CTL */
if (HAS_PCH_CPT(dev) &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2c0c482..185fae6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct
drm_display_mode *mode,
continue;
intel_dp = enc_to_intel_dp(encoder);
- if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) {
+ if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
is_pch_edp(intel_dp)) {
lane_count = intel_dp->lane_count;
break;
- } else if (is_edp(intel_dp)) {
+ } else if (is_cpu_edp(intel_dp)) {
lane_count = dev_priv->edp.lanes;
break;
}
@@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct
drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct drm_crtc *crtc = intel_dp->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct
drm_display_mode *mode,
ironlake_edp_pll_off(encoder);
}
- intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
- intel_dp->DP |= intel_dp->color_range;
+ /*
+ * There are three kinds of DP registers:
+ *
+ * IBX PCH
+ * CPU
+ * CPT PCH
+ *
+ * IBX PCH and CPU are the same for almost everything,
+ * except that the CPU DP PLL is configured in this
+ * register
+ *
+ * CPT PCH is quite different, having many bits moved
+ * to the TRANS_DP_CTL register instead. That
+ * configuration happens (oddly) in ironlake_pch_enable
+ */
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- intel_dp->DP |= DP_SYNC_HS_HIGH;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- intel_dp->DP |= DP_SYNC_VS_HIGH;
+ /* Preserve the BIOS-computed detected bit. This is
+ * supposed to be read-only.
+ */
+ intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
+ intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
- intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
- else
- intel_dp->DP |= DP_LINK_TRAIN_OFF;
+ /* Handle DP bits in common between all three register formats */
+
+ intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
switch (intel_dp->lane_count) {
case 1:
@@ -850,32 +864,54 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct
drm_display_mode *mode,
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
intel_write_eld(encoder, adjusted_mode);
}
-
memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
intel_dp->link_configuration[0] = intel_dp->link_bw;
intel_dp->link_configuration[1] = intel_dp->lane_count;
intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
-
/*
* Check for DPCD version > 1.1 and enhanced framing support
*/
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
(intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
intel_dp->link_configuration[1] |=
DP_LANE_COUNT_ENHANCED_FRAME_EN;
- intel_dp->DP |= DP_ENHANCED_FRAMING;
}
- /* CPT DP's pipe select is decided in TRANS_DP_CTL */
- if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
- intel_dp->DP |= DP_PIPEB_SELECT;
+ /* Split out the IBX/CPU vs CPT settings */
- if (is_cpu_edp(intel_dp)) {
- /* don't miss out required setting for eDP */
- intel_dp->DP |= DP_PLL_ENABLE;
- if (adjusted_mode->clock < 200000)
- intel_dp->DP |= DP_PLL_FREQ_160MHZ;
- else
- intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+ if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+ intel_dp->DP |= intel_dp->color_range;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ intel_dp->DP |= DP_SYNC_HS_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ intel_dp->DP |= DP_SYNC_VS_HIGH;
+ intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+ if (intel_dp->link_configuration[1] &
DP_LANE_COUNT_ENHANCED_FRAME_EN)
+ intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+ /*
+ * Check for DPCD version > 1.1 and enhanced framing support
+ */
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+ (intel_dp->dpcd[DP_MAX_LANE_COUNT] &
DP_ENHANCED_FRAME_CAP)) {
+ intel_dp->link_configuration[1] |=
DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ intel_dp->DP |= DP_ENHANCED_FRAMING;
+ }
+
+ if (intel_crtc->pipe == 1)
+ intel_dp->DP |= DP_PIPEB_SELECT;
+
+ if (is_cpu_edp(intel_dp)) {
+ /* don't miss out required setting for eDP */
+ intel_dp->DP |= DP_PLL_ENABLE;
+ if (adjusted_mode->clock < 200000)
+ intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+ else
+ intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+ }
+ } else {
+ intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
}
@@ -1341,6 +1377,7 @@ static char *link_train_names[] = {
* a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
*/
#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800
+#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200
static uint8_t
intel_dp_pre_emphasis_max(uint8_t voltage_swing)
@@ -1378,8 +1415,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp,
uint8_t link_status[DP_LINK_ST
p = this_p;
}
- if (v >= I830_DP_VOLTAGE_MAX)
- v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ voltage_max = I830_DP_VOLTAGE_MAX_CPT;
+ else
+ voltage_max = I830_DP_VOLTAGE_MAX;
+ if (v >= voltage_max)
+ v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
if (p >= intel_dp_pre_emphasis_max(v))
p = intel_dp_pre_emphasis_max(v) |
DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
@@ -1570,7 +1611,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
/* Use intel_dp->train_set[0] to set the voltage and pre
emphasis values */
uint8_t link_status[DP_LINK_STATUS_SIZE];
uint32_t signal_levels;
- if (IS_GEN6(dev) && is_edp(intel_dp)) {
+
+ if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
signal_levels =
intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) |
signal_levels;
} else {
@@ -1650,12 +1692,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
break;
}
- if (IS_GEN6(dev) && is_edp(intel_dp)) {
+ if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
signal_levels =
intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) |
signal_levels;
} else {
signal_levels =
intel_dp_signal_levels(intel_dp->train_set[0]);
- DRM_DEBUG_KMS("training pattern 1 signal levels
%08x\n", signal_levels);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) |
signal_levels;
}
@@ -1741,8 +1782,12 @@ intel_dp_link_down(struct intel_dp *intel_dp)
msleep(17);
- if (is_edp(intel_dp))
- DP |= DP_LINK_TRAIN_OFF;
+ if (is_edp(intel_dp)) {
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ DP |= DP_LINK_TRAIN_OFF_CPT;
+ else
+ DP |= DP_LINK_TRAIN_OFF;
+ }
if (!HAS_PCH_CPT(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -2186,7 +2231,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc)
continue;
intel_dp = enc_to_intel_dp(encoder);
- if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT)
+ if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+ intel_dp->base.type == INTEL_OUTPUT_EDP)
return intel_dp->output_reg;
}
--
1.7.7
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
