On 11/10/11 8:55 AM, Wu Fengguang wrote:
On Thu, Nov 10, 2011 at 03:33:50PM +0800, Wu Fengguang wrote:
Wow I reproduced the bug and got a very interesting dmesg:
gfx => [ 4561.287980] [drm:intel_write_eld], ELD on
[CONNECTOR:12:HDMI-A-2], [ENCODER:11:TMDS-11]
gfx => [ 4561.291730] [drm:ironlake_write_eld], ELD on pipe B
gfx => [ 4561.293804] [drm:ironlake_write_eld], Audio directed to
unknown port
gfx => [ 4561.295273] [drm:ironlake_write_eld],
alsa => [ 4561.295486] HDMI hot plug event: Codec=3 Pin=6
Presence_Detect=1 ELD_Valid=0
alsa => [ 4561.295564] HDMI status: Codec=3 Pin=6 Presence_Detect=1
ELD_Valid=0
gfx => [ 4561.300020] ELD size 13
alsa => [ 4561.300697] HDMI hot plug event: Codec=3 Pin=6
Presence_Detect=1 ELD_Valid=1
alsa => [ 4561.303322] HDMI status: Codec=3 Pin=6 Presence_Detect=1
ELD_Valid=1
alsa => [ 4561.311120] ALSA hda_eld.c:259 HDMI: Unknown ELD version 0
Hey the two parts are interleaved!
But still it should work all fine, since the gfx driver does
set ELD_Valid = 0
write ELD
set ELD_Valid = 1
So the audio driver would read the correct ELD unless the ELD content
and flag writes are somehow _reordered_ underneath. Or the ELD content
writes take some time to take effect?
Just confirmed that adding 1s delay can fix it!
New dmesg is:
[ 48.564923] [drm:drm_crtc_helper_set_mode], [ENCODER:11:TMDS-11] set
[MODE:34:]
[ 48.567481] [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe B
[ 48.568975] [drm:intel_write_eld], ELD on [CONNECTOR:12:HDMI-A-2],
[ENCODER:11:TMDS-11]
[ 48.571728] [drm:ironlake_write_eld], ELD on pipe B
[ 48.572882] [drm:ironlake_write_eld], Audio directed to unknown port
[ 48.575252] [drm:ironlake_write_eld],
[ 48.575400] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0
[ 48.575487] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=0
[ 48.580116] ELD size 13
[ 48.580795] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 48.583340] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 48.632514] [drm:intel_wait_for_vblank], vblank wait timed out
[ 48.685322] [drm:intel_wait_for_vblank], vblank wait timed out
[ 48.687438] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5,
cursor: 6
[ 48.687438] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 5,
cursor: 6
[ 48.690106] [drm:ironlake_update_wm], FIFO watermarks For pipe B - plane 42,
cursor: 6
[ 48.745204] [drm:intel_wait_for_vblank], vblank wait timed out
[ 48.798035] [drm:intel_wait_for_vblank], vblank wait timed out
[ 48.799633] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x100
[ 48.802686] [drm:ironlake_fdi_link_train], FDI train 1 done.
[ 48.805103] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[ 48.807246] [drm:ironlake_fdi_link_train], FDI train 2 done.
[ 48.809426] [drm:ironlake_fdi_link_train], FDI train done
[ 48.813960] [drm:intel_update_fbc],
[ 48.814782] [drm:drm_crtc_helper_set_config], Setting connector DPMS state
to on
[ 48.818093] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:HDMI-A-2]
set DPMS on
[ 48.828633] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[ 49.618962] HDMI: detected monitor RX-V1800 at connection type HDMI
[ 49.621013] HDMI: available speakers: FL/FR LFE FC RL/RR RC RLC/RRC
[ 49.622304] HDMI: supports coding type LPCM: channels = 2, rates = 32000
44100 48000 96000 176400 192000 384000, bits = 16 20 24
[ 49.625069] HDMI: supports coding type LPCM: channels = 8, rates = 32000
44100 48000 96000 176400 192000 384000, bits = 16 20 24
[ 49.628535] HDMI: supports coding type AC-3: channels = 6, rates = 32000
44100 48000, max bitrate = 640000
[ 49.630810] HDMI: supports coding type DTS: channels = 7, rates = 32000
44100 48000 96000 176400, max bitrate = 1536000
[ 49.633148] HDMI: supports coding type DSD (One Bit Audio): channels = 6,
rates = 44100
[ 49.635039] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus):
channels = 8, rates = 44100 48000
[ 49.637130] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8,
rates = 48000 176400 384000
[ 49.639172] HDMI: supports coding type DTS-HD: channels = 8, rates = 48000
176400 384000
Thanks,
Fengguang
Wow, you were able to reproduce it! That's the best news ever. I will be
applying this patch and rebuilding now to see what happens. So it was
some sort of timing issue after all.
Expect me to reply within 1h, but rebuild takes some time.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
