On 11/09, Robert Bragg wrote:
> Signed-off-by: Robert Bragg <rob...@sixbynine.org>
> ---
> tests/Makefile.sources | 1 +
> tests/perf.c | 2220
> ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 2221 insertions(+)
> create mode 100644 tests/perf.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 6d081c3..7c6de2f 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -211,6 +211,7 @@ TESTS_progs = \
> kms_pwrite_crc \
> kms_sink_crc_basic \
> prime_udl \
> + perf \
> $(NULL)
>
> # IMPORTANT: The ZZ_ tests need to be run last!
> diff --git a/tests/perf.c b/tests/perf.c
> new file mode 100644
> index 0000000..4762e36
> --- /dev/null
> +++ b/tests/perf.c
> @@ -0,0 +1,2220 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <fcntl.h>
> +#include <inttypes.h>
> +#include <errno.h>
> +#include <sys/stat.h>
> +#include <sys/time.h>
> +#include <sys/times.h>
> +#include <sys/types.h>
> +#include <dirent.h>
> +#include <time.h>
> +#include <poll.h>
> +#include <math.h>
> +
> +#include "igt.h"
> +#include "drm.h"
> +
> +IGT_TEST_DESCRIPTION("Test the i915 perf metrics streaming interface");
> +
> +#define GEN6_MI_REPORT_PERF_COUNT ((0x28 << 23) | (3 - 2))
> +
> +#define GFX_OP_PIPE_CONTROL ((3 << 29) | (3 << 27) | (2 << 24))
> +#define PIPE_CONTROL_CS_STALL (1 << 20)
> +#define PIPE_CONTROL_GLOBAL_SNAPSHOT_COUNT_RESET (1 << 19)
> +#define PIPE_CONTROL_TLB_INVALIDATE (1 << 18)
> +#define PIPE_CONTROL_SYNC_GFDT (1 << 17)
> +#define PIPE_CONTROL_MEDIA_STATE_CLEAR (1 << 16)
> +#define PIPE_CONTROL_NO_WRITE (0 << 14)
> +#define PIPE_CONTROL_WRITE_IMMEDIATE (1 << 14)
> +#define PIPE_CONTROL_WRITE_DEPTH_COUNT (2 << 14)
> +#define PIPE_CONTROL_WRITE_TIMESTAMP (3 << 14)
> +#define PIPE_CONTROL_DEPTH_STALL (1 << 13)
> +#define PIPE_CONTROL_RENDER_TARGET_FLUSH (1 << 12)
> +#define PIPE_CONTROL_INSTRUCTION_INVALIDATE (1 << 11)
> +#define PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE (1 << 10) /* GM45+ only */
> +#define PIPE_CONTROL_ISP_DIS (1 << 9)
> +#define PIPE_CONTROL_INTERRUPT_ENABLE (1 << 8)
> +#define PIPE_CONTROL_FLUSH_ENABLE (1 << 7) /* Gen7+ only */
> +/* GT */
> +#define PIPE_CONTROL_DATA_CACHE_INVALIDATE (1 << 5)
> +#define PIPE_CONTROL_VF_CACHE_INVALIDATE (1 << 4)
> +#define PIPE_CONTROL_CONST_CACHE_INVALIDATE (1 << 3)
> +#define PIPE_CONTROL_STATE_CACHE_INVALIDATE (1 << 2)
> +#define PIPE_CONTROL_STALL_AT_SCOREBOARD (1 << 1)
> +#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1 << 0)
> +#define PIPE_CONTROL_PPGTT_WRITE (0 << 2)
> +#define PIPE_CONTROL_GLOBAL_GTT_WRITE (1 << 2)
> +
> +#define NSEC_PER_SEC 1000000000ull
> +
> +static struct {
> + const char *name;
> + uint64_t id;
> + size_t size;
> + int a_off; /* bytes */
> + int n_a;
> + int first_a;
> + int b_off;
> + int n_b;
> + int c_off;
> + int n_c;
> +} hsw_oa_formats[] = {
> + { "A13", I915_OA_FORMAT_A13, .size = 64,
> + .a_off = 12, .n_a = 13 },
> + { "A29", I915_OA_FORMAT_A29, .size = 128,
> + .a_off = 12, .n_a = 29 },
> + { "A13_B8_C8", I915_OA_FORMAT_A13_B8_C8, .size = 128,
> + .a_off = 12, .n_a = 13,
> + .b_off = 64, .n_b = 8,
> + .c_off = 96, .n_c = 8 },
> + { "A45_B8_C8", I915_OA_FORMAT_A45_B8_C8, .size = 256,
> + .a_off = 12, .n_a = 45,
> + .b_off = 192, .n_b = 8,
> + .c_off = 224, .n_c = 8 },
> + { "B4_C8", I915_OA_FORMAT_B4_C8, .size = 64,
> + .b_off = 16, .n_b = 4,
> + .c_off = 32, .n_c = 8 },
> + { "B4_C8_A16", I915_OA_FORMAT_B4_C8_A16, .size = 128,
> + .b_off = 16, .n_b = 4,
> + .c_off = 32, .n_c = 8,
> + .a_off = 60, .n_a = 16, .first_a = 29 },
> + { "C4_B8", I915_OA_FORMAT_C4_B8, .size = 64,
> + .c_off = 16, .n_c = 4,
> + .b_off = 28, .n_b = 8 },
> +};
> +
> +static bool hsw_undefined_a_counters[45] = {
> + [4] = true,
> + [6] = true,
> + [9] = true,
> + [11] = true,
> + [14] = true,
> + [16] = true,
> + [19] = true,
> + [21] = true,
> + [24] = true,
> + [26] = true,
> + [29] = true,
> + [31] = true,
> + [34] = true,
> + [43] = true,
> + [44] = true,
> +};
> +
> +static int drm_fd;
> +static uint32_t devid;
> +static int device;
> +
> +static uint64_t hsw_render_basic_id = UINT64_MAX;
> +static uint64_t gt_min_freq_mhz_saved = 0;
> +static uint64_t gt_max_freq_mhz_saved = 0;
> +static uint64_t gt_min_freq_mhz = 0;
> +static uint64_t gt_max_freq_mhz = 0;
> +
> +static uint64_t timestamp_frequency = 12500000;
> +
> +static igt_render_copyfunc_t render_copy = NULL;
> +
> +static int
> +__perf_open(int fd, struct drm_i915_perf_open_param *param)
> +{
> + int ret = igt_ioctl(fd, DRM_IOCTL_I915_PERF_OPEN, param);
> +
> + igt_assert(ret >= 0);
> + errno = 0;
> +
> + return ret;
> +}
> +
> +static int
> +lookup_format(int i915_perf_fmt_id)
> +{
> + for (int i = 0; i < ARRAY_SIZE(hsw_oa_formats); i++)
> + if (hsw_oa_formats[i].id == i915_perf_fmt_id)
> + return i;
> +
> + igt_assert(!"reached");
> +}
> +
> +static bool
> +try_read_u64_file(const char *file, uint64_t *val)
> +{
> + char buf[32];
> + int fd, n;
> +
> + fd = open(file, O_RDONLY);
> + if (fd < 0)
> + return false;
> +
> + while ((n = read(fd, buf, sizeof(buf) - 1)) < 0 && errno == EINTR)
> + ;
> + igt_assert(n >= 0);
> +
> + close(fd);
> +
> + buf[n] = '\0';
> + *val = strtoull(buf, NULL, 0);
> +
> + return true;
> +}
> +
> +static uint64_t
> +read_u64_file(const char *file)
> +{
> + uint64_t val;
> +
> + igt_assert_eq(try_read_u64_file(file, &val), true);
> +
> + return val;
> +}
> +
> +static void
> +write_u64_file(const char *file, uint64_t val)
> +{
> + char buf[32];
> + int fd, len, ret;
> +
> + fd = open(file, O_WRONLY);
> + igt_assert(fd >= 0);
> +
> + len = snprintf(buf, sizeof(buf), "%"PRIu64, val);
> + igt_assert(len > 0);
> +
> + while ((ret = write(fd, buf, len)) < 0 && errno == EINTR)
> + ;
> + igt_assert_eq(ret, len);
> +
> + close(fd);
> +}
> +
> +static uint64_t
> +sysfs_read(const char *file)
> +{
> + char buf[512];
> +
> + snprintf(buf, sizeof(buf), "/sys/class/drm/card%d/%s", device, file);
> +
> + return read_u64_file(buf);
> +}
> +
> +static void
> +sysfs_write(const char *file, uint64_t val)
> +{
> + char buf[512];
> +
> + snprintf(buf, sizeof(buf), "/sys/class/drm/card%d/%s", device, file);
> +
> + write_u64_file(buf, val);
> +}
> +
> +static char *
> +read_debugfs_record(const char *file, const char *key)
> +{
> + FILE *fp;
> + char *line = NULL;
> + size_t line_buf_size = 0;
> + int len = 0;
> + int key_len = strlen(key);
> + char *value = NULL;
> +
> + fp = igt_debugfs_fopen(file, "r");
> + igt_require(fp);
> +
> + while ((len = getline(&line, &line_buf_size, fp)) > 0) {
> +
> + if (line[len - 1] == '\n')
> + line[len - 1] = '\0';
> +
> + if (strncmp(key, line, key_len) == 0 &&
> + line[key_len] == ':' &&
> + line[key_len + 1] == ' ')
> + {
> + value = strdup(line + key_len + 2);
> + goto done;
Why not just break here, then we don't need the label ? Or perhaps you
meant to whack an igt_assert(!"reached") inbetween ?
> + }
> + }
> +
> +done:
> + free(line);
> + if (fp)
> + fclose(fp);
> + return value;
> +}
> +
> +static uint64_t
> +read_debugfs_u64_record(const char *file, const char *key)
> +{
> + char *str_val = read_debugfs_record(file, key);
> + uint64_t val;
> +
> + igt_require(str_val);
> +
> + val = strtoull(str_val, NULL, 0);
> + free(str_val);
> +
> + return val;
> +}
> +
> +static bool
> +lookup_hsw_render_basic_id(void)
> +{
> + char buf[256];
> +
> + snprintf(buf, sizeof(buf),
> +
> "/sys/class/drm/card%d/metrics/403d8832-1a27-4aa6-a64e-f5389ce7b212/id",
> + device);
> +
> + return try_read_u64_file(buf, &hsw_render_basic_id);
> +}
> +
> +static void
> +gt_frequency_range_save(void)
> +{
> + gt_min_freq_mhz_saved = sysfs_read("gt_min_freq_mhz");
> + gt_max_freq_mhz_saved = sysfs_read("gt_max_freq_mhz");
> +
> + gt_min_freq_mhz = gt_min_freq_mhz_saved;
> + gt_max_freq_mhz = gt_max_freq_mhz_saved;
> +}
> +
> +static void
> +gt_frequency_pin(int gt_freq_mhz)
> +{
> + igt_debug("requesting pinned GT freq = %dmhz\n", gt_freq_mhz);
> +
> + if (gt_freq_mhz > gt_max_freq_mhz) {
> + sysfs_write("gt_max_freq_mhz", gt_freq_mhz);
> + sysfs_write("gt_min_freq_mhz", gt_freq_mhz);
> + } else {
> + sysfs_write("gt_min_freq_mhz", gt_freq_mhz);
> + sysfs_write("gt_max_freq_mhz", gt_freq_mhz);
> + }
> + gt_min_freq_mhz = gt_freq_mhz;
> + gt_max_freq_mhz = gt_freq_mhz;
> +}
> +
> +static void
> +gt_frequency_range_restore(void)
> +{
> + igt_debug("restoring GT frequency range: min = %dmhz, max =%dmhz,
> current: min=%dmhz, max=%dmhz\n",
> + (int)gt_min_freq_mhz_saved,
> + (int)gt_max_freq_mhz_saved,
> + (int)gt_min_freq_mhz,
> + (int)gt_max_freq_mhz);
> +
> + /* Assume current min/max are the same */
> + if (gt_min_freq_mhz_saved > gt_max_freq_mhz) {
> + sysfs_write("gt_max_freq_mhz", gt_max_freq_mhz_saved);
> + sysfs_write("gt_min_freq_mhz", gt_min_freq_mhz_saved);
> + } else {
> + sysfs_write("gt_min_freq_mhz", gt_min_freq_mhz_saved);
> + sysfs_write("gt_max_freq_mhz", gt_max_freq_mhz_saved);
> + }
> +
> + gt_min_freq_mhz = gt_min_freq_mhz_saved;
> + gt_max_freq_mhz = gt_max_freq_mhz_saved;
> +}
> +
> +static uint64_t
> +timebase_scale(uint32_t u32_delta)
> +{
> + return ((uint64_t)u32_delta * NSEC_PER_SEC) / timestamp_frequency;
> +}
> +
> +/* CAP_SYS_ADMIN is required to open system wide metrics, unless the system
> + * control parameter dev.i915.perf_stream_paranoid == 0 */
> +static void
> +test_system_wide_paranoid(void)
> +{
> + igt_fork(child, 1) {
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET,
> hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT,
> I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond
> */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_FD_NONBLOCK,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> +
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
> +
> + igt_drop_root();
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m,
> EACCES);
> + }
> +
> + igt_waitchildren();
> +
> + igt_fork(child, 1) {
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET,
> hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT,
> I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond
> */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_FD_NONBLOCK,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd;
> +
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 0);
> +
> + igt_drop_root();
> +
> + stream_fd = __perf_open(drm_fd, ¶m);
> + close(stream_fd);
> + }
> +
> + igt_waitchildren();
> +
> + /* leave in paranoid state */
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
> +}
> +
> +static void
> +test_invalid_open_flags(void)
> +{
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = ~0, /* Undefined flag bits set! */
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +}
> +
> +static void
> +test_invalid_oa_metric_set_id(void)
> +{
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, UINT64_MAX,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_FD_NONBLOCK,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd;
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +
> + properties[ARRAY_SIZE(properties) - 1] = 0; /* ID 0 is also be
> reserved as invalid */
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +
> + /* Check that we aren't just seeing false positives... */
> + properties[ARRAY_SIZE(properties) - 1] = hsw_render_basic_id;
> + stream_fd = __perf_open(drm_fd, ¶m);
> + close(stream_fd);
> +
> + /* There's no valid default OA metric set ID... */
> + param.num_properties--;
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +}
> +
> +static void
> +test_invalid_oa_format_id(void)
> +{
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond */
> + DRM_I915_PERF_PROP_OA_FORMAT, UINT64_MAX,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_FD_NONBLOCK,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd;
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +
> + properties[ARRAY_SIZE(properties) - 1] = 0; /* ID 0 is also be
> reserved as invalid */
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +
> + /* Check that we aren't just seeing false positives... */
> + properties[ARRAY_SIZE(properties) - 1] = I915_OA_FORMAT_A45_B8_C8;
> + stream_fd = __perf_open(drm_fd, ¶m);
> + close(stream_fd);
> +
> + /* There's no valid default OA format... */
> + param.num_properties--;
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +}
> +
> +static void
> +test_missing_sample_flags(void)
> +{
> + uint64_t properties[] = {
> + /* No _PROP_SAMPLE_xyz flags */
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond */
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m, EINVAL);
> +}
> +
> +static void
> +read_2_oa_reports(int stream_fd,
> + uint64_t format_id,
> + size_t format_size,
> + int exponent,
> + uint32_t *oa_report0,
> + uint32_t *oa_report1,
> + bool timer_only)
> +{
> + size_t sample_size = (sizeof(struct drm_i915_perf_record_header) +
> + format_size);
> + const struct drm_i915_perf_record_header *header;
> + uint32_t exponent_mask = (1 << (exponent + 1)) - 1;
> +
> + /* Note: we allocate a large buffer so that each read() iteration
> + * should scrape *all* pending records.
> + *
> + * The largest buffer the OA unit supports is 16MB and the smallest
> + * OA report format is 64bytes allowing up to 262144 reports to
> + * be buffered.
> + *
> + * Being sure we are fetching all buffered reports allows us to
> + * potentially throw away / skip all reports whenever we see
> + * a _REPORT_LOST notification as a way of being sure are
> + * measurements aren't skewed by a lost report.
> + *
> + * Note: that is is useful for some tests but also not something
> + * applications would be expected to resort to. Lost reports are
> + * somewhat unpredictable but typically don't pose a problem - except
> + * to indicate that the OA unit may be over taxed if lots of reports
> + * are being lost.
> + */
> + int buf_size = 262144 * (64 + sizeof(struct
> drm_i915_perf_record_header));
> + uint8_t *buf = malloc(buf_size);
> + int n = 0;
> +
> + for (int i = 0; i < 1000; i++) {
> + ssize_t len;
> +
> + while ((len = read(stream_fd, buf, buf_size)) < 0 &&
> + errno == EINTR)
> + ;
> +
> + igt_assert(len > 0);
> +
> + for (size_t offset = 0; offset < len; offset +=
> header->size) {
> + const uint32_t *report;
> +
> + header = (void *)(buf + offset);
> +
> + igt_assert_eq(header->pad, 0); /* Reserved */
> +
> + /* Currently the only test that should ever expect to
> + * see a _BUFFER_LOST error is the buffer_fill test,
> + * otherwise something bad has probably happened...
> + */
> + igt_assert_neq(header->type,
> DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
> +
> + /* At high sampling frequencies the OA HW might not
> be
> + * able to cope with all write requests and will
> notify
> + * us that a report was lost. We restart our read of
> + * two sequential reports due to the timeline blip
> this
> + * implies
> + */
> + if (header->type ==
> DRM_I915_PERF_RECORD_OA_REPORT_LOST) {
> + igt_debug("read restart: OA trigger
> collision / report lost\n");
> + n = 0;
> +
> + /* XXX: break, because we don't know where
> + * within the series of already read reports
> + * there could be a blip from the lost
> report.
> + */
> + break;
> + }
> +
> + /* Currently the only other record type expected is a
> + * _SAMPLE. Notably this test will need updating if
> + * i915-perf is extended in the future with
> additional
> + * record types.
> + */
> + igt_assert_eq(header->type,
> DRM_I915_PERF_RECORD_SAMPLE);
> +
> + igt_assert_eq(header->size, sample_size);
> +
> + report = (const void *)(header + 1);
> +
> + igt_debug("read report: reason = %x, timestamp = %x,
> exponent mask=%x\n",
> + report[0], report[1], exponent_mask);
> +
> + /* Don't expect zero for timestamps */
> + igt_assert_neq(report[1], 0);
> +
> + if (timer_only) {
> + /* For Haswell we don't have a documented
> + * report reason field (though empirically
> + * report[0] bit 10 does seem to correlate
> with
> + * a timer trigger reason) so we instead
> infer
> + * which reports are timer triggered by
> + * checking if the least significant bits are
> + * zero and the exponent bit is set.
> + */
> + if ((report[1] & exponent_mask) != (1 <<
> exponent)) {
> + igt_debug("skipping non timer report
> reason=%x\n",
> + report[0]);
> +
> + /* Also assert our hypothesis about
> the
> + * reason bit...
> + */
> + igt_assert_eq(report[0] & (1 << 10),
> 0);
> + continue;
> + }
> + }
> +
> + if (n++ == 0)
> + memcpy(oa_report0, report, format_size);
> + else {
> + memcpy(oa_report1, report, format_size);
> + free(buf);
> + return;
> + }
> + }
> + }
> +
> + free(buf);
> +
> + igt_assert(!"reached");
> +}
> +
> +static void
> +open_and_read_2_oa_reports(uint64_t format_id,
> + size_t format_size,
> + int exponent,
> + uint32_t *oa_report0,
> + uint32_t *oa_report1,
> + bool timer_only)
> +{
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, format_id,
> + DRM_I915_PERF_PROP_OA_EXPONENT, exponent,
> +
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> +
> + read_2_oa_reports(stream_fd, format_id, format_size, exponent,
> + oa_report0, oa_report1, timer_only);
> +
> + close(stream_fd);
> +}
> +
> +static void
> +print_reports(uint32_t *oa_report0, uint32_t *oa_report1, int fmt)
> +{
> + uint32_t *a0, *b0, *c0;
> + uint32_t *a1, *b1, *c1;
> +
> + /* Not ideal naming here with a0 or a1
> + * differentiating report0 or 1 not A counter 0 or 1....
> + */
> + a0 = (uint32_t *)(((uint8_t *)oa_report0) +
> hsw_oa_formats[fmt].a_off);
> + b0 = (uint32_t *)(((uint8_t *)oa_report0) +
> hsw_oa_formats[fmt].b_off);
> + c0 = (uint32_t *)(((uint8_t *)oa_report0) +
> hsw_oa_formats[fmt].c_off);
> +
> + a1 = (uint32_t *)(((uint8_t *)oa_report1) +
> hsw_oa_formats[fmt].a_off);
> + b1 = (uint32_t *)(((uint8_t *)oa_report1) +
> hsw_oa_formats[fmt].b_off);
> + c1 = (uint32_t *)(((uint8_t *)oa_report1) +
> hsw_oa_formats[fmt].c_off);
> +
> + igt_debug("TIMESTAMP: 1st = %"PRIu32", 2nd = %"PRIu32", delta =
> %"PRIu32"\n",
> + oa_report0[1], oa_report1[1], oa_report1[1] -
> oa_report0[1]);
> +
> + if (hsw_oa_formats[fmt].n_c) {
> + igt_debug("CLOCK: 1st = %"PRIu32", 2nd = %"PRIu32", delta =
> %"PRIu32"\n",
> + c0[2], c1[2], c1[2] - c0[2]);
> + } else
> + igt_debug("CLOCK = N/A\n");
> +
> + for (int j = hsw_oa_formats[fmt].first_a;
> + j < hsw_oa_formats[fmt].n_a;
> + j++)
> + {
> + uint32_t delta = a1[j] - a0[j];
> +
> + if (hsw_undefined_a_counters[j])
> + continue;
> +
> + igt_debug("A%d: 1st = %"PRIu32", 2nd = %"PRIu32", delta =
> %"PRIu32"\n",
> + j, a0[j], a1[j], delta);
> + }
> +
> + for (int j = 0; j < hsw_oa_formats[fmt].n_b; j++) {
> + uint32_t delta = b1[j] - b0[j];
> + igt_debug("B%d: 1st = %"PRIu32", 2nd = %"PRIu32", delta =
> %"PRIu32"\n",
> + j, b0[j], b1[j], delta);
> + }
> +
> + for (int j = 0; j < hsw_oa_formats[fmt].n_c; j++) {
> + uint32_t delta = c1[j] - c0[j];
> + igt_debug("C%d: 1st = %"PRIu32", 2nd = %"PRIu32", delta =
> %"PRIu32"\n",
> + j, c0[j], c1[j], delta);
> + }
> +}
> +
> +static void
> +test_oa_formats(void)
> +{
> + int oa_exponent = 13;
> +
> + for (int i = 0; i < ARRAY_SIZE(hsw_oa_formats); i++) {
> + uint32_t oa_report0[64];
> + uint32_t oa_report1[64];
> + uint32_t *a0, *b0, *c0;
> + uint32_t *a1, *b1, *c1;
> + uint32_t time_delta;
> + uint32_t clock_delta;
> + uint32_t max_delta;
> +
> + igt_debug("Checking OA format %s\n", hsw_oa_formats[i].name);
> +
> + open_and_read_2_oa_reports(hsw_oa_formats[i].id,
> + hsw_oa_formats[i].size,
> + oa_exponent,
> + oa_report0,
> + oa_report1,
> + false); /* timer reports only */
> +
> + print_reports(oa_report0, oa_report1, i);
> +
> + a0 = (uint32_t *)(((uint8_t *)oa_report0) +
> hsw_oa_formats[i].a_off);
> + b0 = (uint32_t *)(((uint8_t *)oa_report0) +
> hsw_oa_formats[i].b_off);
> + c0 = (uint32_t *)(((uint8_t *)oa_report0) +
> hsw_oa_formats[i].c_off);
> +
> + a1 = (uint32_t *)(((uint8_t *)oa_report1) +
> hsw_oa_formats[i].a_off);
> + b1 = (uint32_t *)(((uint8_t *)oa_report1) +
> hsw_oa_formats[i].b_off);
> + c1 = (uint32_t *)(((uint8_t *)oa_report1) +
> hsw_oa_formats[i].c_off);
> +
> + time_delta = timebase_scale(oa_report1[1] - oa_report0[1]);
> + igt_assert_neq(time_delta, 0);
> +
> + /* C2 corresponds to a clock counter for this metric set but
> + * it's not included in all of the formats. */
> + if (hsw_oa_formats[i].n_c) {
> + uint64_t freq;
> +
> + /* The first report might have a clock count of zero
> + * but we wouldn't expect that in the second
> report...
> + */
> + igt_assert_neq(c1[2], 0);
> +
> + clock_delta = c1[2] - c0[2];
> + igt_assert_neq(clock_delta, 0);
> +
> + freq = ((uint64_t)clock_delta * 1000) / time_delta;
> + igt_debug("freq = %"PRIu64"\n", freq);
> +
> + igt_assert(freq <= gt_max_freq_mhz);
> + } else {
> + /* Assume running at max freq for sake of
> + * below sanity check on counters... */
> + clock_delta = (gt_max_freq_mhz *
> + (uint64_t)time_delta) / 1000;
> + }
> +
> + igt_debug("clock delta = %"PRIu32"\n", clock_delta);
> +
> + /* The maximum rate for any HSW counter =
> + * clock_delta * 40 EUs
> + *
> + * Sanity check that no counters exceed this delta.
> + */
> + max_delta = clock_delta * 40;
> +
> + for (int j = hsw_oa_formats[i].first_a;
> + j < hsw_oa_formats[i].n_a;
> + j++)
> + {
> + uint32_t delta = a1[j] - a0[j];
> +
> + if (hsw_undefined_a_counters[j])
> + continue;
> +
> + igt_debug("A%d: delta = %"PRIu32"\n", j, delta);
> + igt_assert(delta <= max_delta);
> + }
> +
> + for (int j = 0; j < hsw_oa_formats[i].n_b; j++) {
> + uint32_t delta = b1[j] - b0[j];
> + igt_debug("B%d: delta = %"PRIu32"\n", j, delta);
> + igt_assert(delta <= max_delta);
> + }
> +
> + for (int j = 0; j < hsw_oa_formats[i].n_c; j++) {
> + uint32_t delta = c1[j] - c0[j];
> + igt_debug("C%d: delta = %"PRIu32"\n", j, delta);
> + igt_assert(delta <= max_delta);
> + }
> + }
> +}
> +
> +static void
> +test_oa_exponents(int gt_freq_mhz)
> +{
> + /* XXX: Note that gt_min/max_freq_mhz don't seem to be a reliable
> + * mechanism for fixing the gpu frequency and since these unit tests
> + * are focused on the OA unit not the ability to pin the frequency we
> + * read back the current frequency for each iteration of this test to
> + * take this into account.
> + */
> + gt_frequency_pin(gt_freq_mhz);
> +
> + igt_debug("Testing OA timer exponents with requested GT frequency =
> %dmhz\n",
> + gt_freq_mhz);
> +
> + /* It's asking a lot to sample with a 160 nanosecond period and the
> + * test can fail due to buffer overflows if it wasn't possible to
> + * keep up, so we don't start from an exponent of zero...
> + */
> + for (int i = 2; i < 20; i++) {
> + uint32_t expected_timestamp_delta;
> + uint32_t timestamp_delta;
> + uint32_t oa_report0[64];
> + uint32_t oa_report1[64];
> + uint32_t *c0, *c1;
> + uint32_t time_delta;
> + uint32_t clock_delta;
> + uint32_t freq;
> + int n_freq_matches = 0;
> +
> + /* The exponent is effectively selecting a bit in the
> timestamp
> + * to trigger reports on and so in practice we expect the raw
> + * timestamp deltas for periodic reports to exactly match the
> + * value of next bit.
> + */
> + expected_timestamp_delta = 2 << i;
> +
> + for (int j = 0; j < 10; j++) {
> + gt_freq_mhz = sysfs_read("gt_act_freq_mhz");
> +
> + igt_debug("ITER %d: testing OA exponent %d with GT
> freq = %dmhz\n",
> + j, i, gt_freq_mhz);
> +
> + open_and_read_2_oa_reports(I915_OA_FORMAT_A45_B8_C8,
> 256,
> + i, /* exponent */
> + oa_report0,
> + oa_report1,
> + true); /* timer triggered
> + reports only */
> +
> + timestamp_delta = oa_report1[1] - oa_report0[1];
> + igt_assert_neq(timestamp_delta, 0);
> +
> + if (timestamp_delta != expected_timestamp_delta) {
> + igt_debug("timestamp0 = %u/0x%x\n",
> + oa_report0[1], oa_report0[1]);
> + igt_debug("timestamp1 = %u/0x%x\n",
> + oa_report1[1], oa_report1[1]);
> + }
> +
> + igt_assert_eq(timestamp_delta,
> expected_timestamp_delta);
> +
> + c0 = (uint32_t *)(((uint8_t *)oa_report0) + 224 /* C
> offset */);
> + c1 = (uint32_t *)(((uint8_t *)oa_report1) + 224 /* C
> offset */);
Most definitely sprinkle a comment here for what the custom counter
actually is, "The total number of GPU core clocks elapsed during the
measurement."
> + clock_delta = c1[2] - c0[2];
> +
> + time_delta = timebase_scale(timestamp_delta);
> +
> + freq = ((uint64_t)clock_delta * 1000) / time_delta;
> + igt_debug("ITER %d: time delta = %"PRIu32"(ns) clock
> delta = %"PRIu32" freq = %"PRIu32"(mhz)\n",
> + j, time_delta, clock_delta, freq);
> +
> + if (freq == gt_freq_mhz)
> + n_freq_matches++;
> + }
> +
> + igt_debug("number of iterations with expected clock
> frequency = %d\n",
> + n_freq_matches);
> +
> + /* Don't assert the calculated frequency for extremely short
> + * durations... */
> + if (i > 3)
> + igt_assert(n_freq_matches >= 7);
> + }
> +
> + gt_frequency_range_restore();
> +}
> +
> +/* The OA exponent selects a timestamp counter bit to trigger reports on.
> + *
> + * With a 64bit timestamp and least significant bit approx == 80ns then the
> MSB
> + * equates to > 40 thousand years and isn't exposed via the i915 perf
> interface.
> + *
> + * The max exponent exposed is expected to be 31, which is still a fairly
> + * ridiculous period (>5min) but is the maximum exponent where it's still
> + * possible to use periodic sampling as a means for tracking the overflow of
> + * 32bit OA report timestamps.
> + */
> +static void
> +test_invalid_oa_exponent(void)
> +{
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 31, /* maximum exponent
> expected
> + to be accepted */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> +
> + close(stream_fd);
> +
> + for (int i = 32; i < 65; i++) {
> + properties[7] = i;
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m,
> EINVAL);
> + }
> +}
> +
> +/* Return the largest OA exponent that will still result in a sampling
> + * frequency higher than the given frequency.
> + */
> +static int
> +max_oa_exponent_for_higher_freq(uint64_t freq)
> +{
> + /* NB: timebase_scale() takes a uint32_t and an exponent of 30
> + * would already represent a period of ~3 minutes so there's
> + * really no need to consider higher exponents.
> + */
> + for (int i = 0; i < 30; i++) {
> + uint64_t oa_period = timebase_scale(2 << i);
> + uint32_t oa_freq = NSEC_PER_SEC / oa_period;
> +
> + if (oa_freq <= freq)
> + return max(0, i - 1);
> + }
> +
> + igt_assert(!"reached");
> + return -1;
> +}
> +
> +/* The lowest periodic sampling exponent equates to a period of 160
> nanoseconds
> + * or a frequency of 6.25MHz which is only possible to request as root by
> + * default. By default the maximum OA sampling rate is 100KHz
> + */
> +static void
> +test_low_oa_exponent_permissions(void)
> +{
> + int max_freq =
> read_u64_file("/proc/sys/dev/i915/oa_max_sample_rate");
> + int bad_exponent = max_oa_exponent_for_higher_freq(max_freq);
> + int ok_exponent = bad_exponent + 1;
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, bad_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + uint64_t oa_period, oa_freq;
> +
> + igt_assert_eq(max_freq, 100000);
> +
> + /* Avoid EACCESS errors opening a stream without CAP_SYS_ADMIN */
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 0);
> +
> + igt_fork(child, 1) {
> + igt_drop_root();
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m,
> EACCES);
> + }
> +
> + igt_waitchildren();
> +
> + properties[7] = ok_exponent;
> +
> + igt_fork(child, 1) {
> + int stream_fd;
> +
> + igt_drop_root();
> +
> + stream_fd = __perf_open(drm_fd, ¶m);
> + close(stream_fd);
> + }
> +
> + igt_waitchildren();
> +
> + oa_period = timebase_scale(2 << ok_exponent);
> + oa_freq = NSEC_PER_SEC / oa_period;
> + write_u64_file("/proc/sys/dev/i915/oa_max_sample_rate", oa_freq -
> 100);
> +
> + igt_fork(child, 1) {
> + igt_drop_root();
> +
> + do_ioctl_err(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m,
> EACCES);
> + }
> +
> + igt_waitchildren();
> +
> + /* restore the defaults */
> + write_u64_file("/proc/sys/dev/i915/oa_max_sample_rate", 100000);
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
> +}
> +
> +static void
> +test_per_context_mode_unprivileged(void)
> +{
> + uint64_t properties[] = {
> + /* Single context sampling */
> + DRM_I915_PERF_PROP_CTX_HANDLE, UINT64_MAX, /* updated below
> */
> +
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, 13, /* 1 millisecond */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> +
> + /* should be default, but just to be sure... */
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
> +
> + igt_fork(child, 1) {
> + drm_intel_context *context;
> + drm_intel_bufmgr *bufmgr;
> + int stream_fd;
> +
> + igt_drop_root();
> +
> + bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096);
> + context = drm_intel_gem_context_create(bufmgr);
> +
> + igt_assert(context);
> +
> + properties[1] =
> drm_intel_gem_context_get_context_id(context);
> +
> + stream_fd = __perf_open(drm_fd, ¶m);
> + close(stream_fd);
Missing drm_intel_gem_context_destroy.
Missing drm_intel_bufmgr_destroy.
> + }
> +
> + igt_waitchildren();
> +}
> +
> +static int64_t
> +get_time(void)
> +{
> + struct timespec ts;
> +
> + clock_gettime(CLOCK_MONOTONIC, &ts);
> +
> + return ts.tv_sec * 1000000000 + ts.tv_nsec;
> +}
> +
> +/* Note: The interface doesn't currently provide strict guarantees or control
> + * over the upper bound for how long it might take for a POLLIN event after
> + * some OA report is written by the OA unit.
> + *
> + * The plan is to add a property later that gives some control over the
> maximum
> + * latency, but for now we expect it is tuned for a fairly low latency
> + * suitable for applications wanting to provide live feedback for captured
> + * metrics.
> + *
> + * At the time of writing this test the driver was using a fixed 200Hz
> hrtimer
> + * regardless of the OA sampling exponent.
> + *
> + * There is no lower bound since a stream configured for periodic sampling
> may
> + * still contain other automatically triggered reports.
> + *
> + * What we try and check for here is that blocking reads don't return EAGAIN
> + * and that we aren't spending any significant time burning the cpu in
> + * kernelspace.
> + */
> +static void
> +test_blocking(void)
> +{
> + /* 40 milliseconds
> + *
> + * Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop
> + * scheduling (liable to kick in when we make blocking poll()s/reads)
> + * from interfering with the test.
> + */
> + int oa_exponent = 18;
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + uint8_t buf[1024 * 1024];
> + struct tms start_times;
> + struct tms end_times;
> + int64_t user_ns, kernel_ns;
> + int64_t tick_ns = 1000000000 / sysconf(_SC_CLK_TCK);
> + int64_t start;
> + int n = 0;
> +
> + times(&start_times);
> +
> + /* Loop for 600ms performing blocking reads while the HW is sampling
> at
> + * ~25Hz, with the expectation that we spend most of our time blocked
> + * in the kernel, and shouldn't be burning cpu cycles in the kernel
> in
> + * association with this process (verified by looking at stime before
> + * and after loop).
> + */
> + for (start = get_time(); (get_time() - start) < 600000000; /* nop
> */) {
> + int ret;
> +
> + while ((ret = read(stream_fd, buf, sizeof(buf))) < 0 &&
> + errno == EINTR)
> + ;
> +
> + igt_assert(ret > 0);
> +
> + n++;
> + }
> +
> + times(&end_times);
> +
> + /* Using nanosecond units is fairly silly here, given the tick in-
> + * precision - ah well, it's consistent with the get_time() units.
> + */
> + user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns;
> + kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns;
> +
> + igt_debug("%d blocking reads in 500 milliseconds, with 1KHz OA
> sampling\n", n);
> + igt_debug("time in userspace = %"PRIu64"ns (start utime = %d, end =
> %d, ns ticks per sec = %d)\n",
> + user_ns, (int)start_times.tms_utime,
> (int)end_times.tms_utime, (int)tick_ns);
> + igt_debug("time in kernelspace = %"PRIu64"ns (start stime = %d, end
> = %d, ns ticks per sec = %d)\n",
> + kernel_ns, (int)start_times.tms_stime,
> (int)end_times.tms_stime, (int)tick_ns);
> +
> + /* With completely broken blocking (but also not returning an error)
> we
> + * could end up with an open loop, hopefully recognisable with > 15
> + * (600/40)iterations.
> + */
> + igt_assert(n <= 15);
> +
> + /* It's a bit tricky to put a lower limit here, but we expect a
> + * relatively low latency for seeing reports, while we don't
> currently
> + * give any control over this in the api.
> + *
> + * Limited to a 5 millisecond latency and 45ms (worst case)
> + * per-iteration that could give 13.3 iterations. Rounding gives a
> tiny
> + * bit more latency slack (6ms)...
> + */
> + igt_assert(n > 13);
> +
> + /* A bit tricky to put a number on this, but we don't expect the
> kernel
> + * to use any significant cpu while waiting and given the in
> precision
> + * of stime (multiple of CLK_TCK) we expect this to round to zero.
> + */
> + igt_assert_eq(kernel_ns, 0);
> +
> + close(stream_fd);
> +}
> +
> +static void
> +test_polling(void)
> +{
> + /* 40 milliseconds
> + *
> + * Having a period somewhat > sysconf(_SC_CLK_TCK) helps to stop
> + * scheduling (liable to kick in when we make blocking poll()s/reads)
> + * from interfering with the test.
> + */
> + int oa_exponent = 18;
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_FD_NONBLOCK,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + uint8_t buf[1024 * 1024];
> + struct tms start_times;
> + struct tms end_times;
> + int64_t user_ns, kernel_ns;
> + int64_t tick_ns = 1000000000 / sysconf(_SC_CLK_TCK);
> + int64_t start;
> + int n = 0;
> +
> + times(&start_times);
> +
> + /* Loop for 600ms performing blocking polls while the HW is sampling
> at
> + * ~25Hz, with the expectation that we spend most of our time blocked
> + * in the kernel, and shouldn't be burning cpu cycles in the kernel
> in
> + * association with this process (verified by looking at stime before
> + * and after loop).
> + */
> + for (start = get_time(); (get_time() - start) < 600000000; /* nop
> */) {
> + struct pollfd pollfd = { .fd = stream_fd, .events = POLLIN };
> + int ret;
> +
> + while ((ret = poll(&pollfd, 1, -1)) < 0 &&
> + errno == EINTR)
> + ;
> + igt_assert_eq(ret, 1);
> + igt_assert(pollfd.revents & POLLIN);
> +
> + while ((ret = read(stream_fd, buf, sizeof(buf))) < 0 &&
> + errno == EINTR)
> + ;
> +
> + /* Don't expect to see EAGAIN if we've had a POLLIN event
> + *
> + * XXX: actually this is technically overly strict since we
> do
> + * knowingly allow false positive POLLIN events. At least in
> + * the future when supporting context filtering of metrics
> for
> + * Gen8+ handled in the kernel then POLLIN events may be
> + * delivered when we know there are pending reports to
> process
> + * but before we've done any filtering to know for certain
> that
> + * any reports are destined to be copied to userspace.
> + *
> + * Still, for now it's a reasonable sanity check.
> + */
> + if (ret < 0)
> + igt_debug("Unexpected error when reading after poll
> = %d\n", errno);
> + igt_assert_neq(ret, -1);
> +
> + /* At this point, after consuming pending reports (and hoping
> + * the scheduler hasn't stopped us for too long we now
> + * expect EAGAIN on read.
> + */
> + while ((ret = read(stream_fd, buf, sizeof(buf))) < 0 &&
> + errno == EINTR)
> + ;
> + igt_assert_eq(ret, -1);
> + igt_assert_eq(errno, EAGAIN);
> +
> + n++;
> + }
> +
> + times(&end_times);
> +
> + /* Using nanosecond units is fairly silly here, given the tick in-
> + * precision - ah well, it's consistent with the get_time() units.
> + */
> + user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns;
> + kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns;
> +
> + igt_debug("%d blocking poll()s in 600 milliseconds, with 25Hz OA
> sampling\n", n);
> + igt_debug("time in userspace = %"PRIu64"ns (start utime = %d, end =
> %d, ns ticks per sec = %d)\n",
> + user_ns, (int)start_times.tms_utime,
> (int)end_times.tms_utime, (int)tick_ns);
> + igt_debug("time in kernelspace = %"PRIu64"ns (start stime = %d, end
> = %d, ns ticks per sec = %d)\n",
> + kernel_ns, (int)start_times.tms_stime,
> (int)end_times.tms_stime, (int)tick_ns);
> +
> + /* With completely broken blocking while polling (but still somehow
> + * reporting a POLLIN event) we could end up with an open loop,
> + * hopefully recognisable with > 15 (600/40)iterations.
> + */
> + igt_assert(n <= 15);
> +
> + /* It's a bit tricky to put a lower limit here, but we expect a
> + * relatively low latency for seeing reports, while we don't
> currently
> + * give any control over this in the api.
> + *
> + * Limited to a 5 millisecond latency and 45ms (worst case)
> + * per-iteration that could give 13.3 iterations. Rounding gives a
> tiny
> + * bit more latency slack (6ms)...
> + */
> + igt_assert(n > 13);
> +
> + /* A bit tricky to put a number on this, but we don't expect the
> kernel
> + * to use any significant cpu while waiting and given the in
> precision
> + * of stime (multiple of CLK_TCK) we expect this to round to zero.
> + */
> + igt_assert_eq(kernel_ns, 0);
> +
> + close(stream_fd);
> +}
> +
> +static void
> +test_buffer_fill(void)
> +{
> + int oa_exponent = 5; /* 5 micro seconds */
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + int buf_size = 65536 * (256 + sizeof(struct
> drm_i915_perf_record_header));
> + uint8_t *buf = malloc(buf_size);
> +
> +
> + for (int i = 0; i < 5; i++) {
> + struct drm_i915_perf_record_header *header;
> + bool overflow_seen;
> + int offset = 0;
> + int len;
> +
> + /* It should take ~330 milliseconds to fill a 16MB OA buffer
> with a
> + * 5 microsecond sampling period and 256 byte reports. */
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec =
> 500000000 }, NULL);
> +
> + while ((len = read(stream_fd, buf, buf_size)) == -1 && errno
> == EINTR)
> + ;
> +
> + igt_assert_neq(len, -1);
> +
> + overflow_seen = false;
> + for (offset = 0; offset < len; offset += header->size) {
> + header = (void *)(buf + offset);
> +
> + if (header->type ==
> DRM_I915_PERF_RECORD_OA_BUFFER_LOST)
> + overflow_seen = true;
> + }
> +
> + igt_assert_eq(overflow_seen, true);
> +
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec =
> 1000000 }, NULL);
> +
> + while ((len = read(stream_fd, buf, buf_size)) == -1 && errno
> == EINTR)
> + ;
> +
> + igt_assert_neq(len, -1);
> +
> + /* expect ~ 200 records in 1 millisecond */
> + igt_assert(len > 256 * 150);
> +
> + overflow_seen = false;
> + for (offset = 0; offset < len; offset += header->size) {
> + header = (void *)(buf + offset);
> +
> + if (header->type ==
> DRM_I915_PERF_RECORD_OA_BUFFER_LOST)
> + overflow_seen = true;
> + }
> +
> + igt_assert_eq(overflow_seen, false);
> + }
> +
> + free(buf);
> +
> + close(stream_fd);
> +}
> +
> +static void
> +test_enable_disable(void)
> +{
> + int oa_exponent = 5; /* 5 micro seconds */
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_DISABLED, /* Verify we start
> disabled */
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + int buf_size = 65536 * (256 + sizeof(struct
> drm_i915_perf_record_header));
> + uint8_t *buf = malloc(buf_size);
> +
> +
> + for (int i = 0; i < 5; i++) {
> + int len;
> +
> + /* If the stream were enabled then it would take ~330
> + * milliseconds to fill a 16MB OA buffer with a 5 microsecond
> + * sampling period and 256 byte reports.
> + *
> + * Giving enough time for an overflow might help catch
> whether
> + * the OA unit has been enabled even if the driver might at
> + * least avoid copying reports while disabled.
> + */
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec =
> 500000000 }, NULL);
> +
> + while ((len = read(stream_fd, buf, buf_size)) == -1 && errno
> == EINTR)
> + ;
> +
> + igt_assert_eq(len, -1);
> + igt_assert_eq(errno, EIO);
> +
> + do_ioctl(stream_fd, I915_PERF_IOCTL_ENABLE, 0);
> +
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec =
> 1000000 }, NULL);
> +
> + while ((len = read(stream_fd, buf, buf_size)) == -1 && errno
> == EINTR)
> + ;
> +
> + igt_assert_neq(len, -1);
> +
> + /* expect ~ 200 records in 1 millisecond */
> + igt_assert(len > 256 * 150 && len < 256 * 2000);
> +
> + do_ioctl(stream_fd, I915_PERF_IOCTL_DISABLE, 0);
> +
> + /* It's considered an error to read a stream while it's
> disabled
> + * since it would block indefinitely...
> + */
> + len = read(stream_fd, buf, buf_size);
> +
> + igt_assert_eq(len, -1);
> + igt_assert_eq(errno, EIO);
> + }
> +
> + free(buf);
> +
> + close(stream_fd);
> +}
> +
> +static void
> +test_short_reads(void)
> +{
> + int oa_exponent = 5; /* 5 micro seconds */
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + size_t record_size = 256 + sizeof(struct
> drm_i915_perf_record_header);
> + size_t page_size = sysconf(_SC_PAGE_SIZE);
> + int zero_fd = open("/dev/zero", O_RDWR|O_CLOEXEC);
> + uint8_t *pages = mmap(NULL, page_size * 2,
> + PROT_READ|PROT_WRITE, MAP_PRIVATE, zero_fd, 0);
I don't see an munmap or close(zero_fd) anywhere ?
> + struct drm_i915_perf_record_header *header;
> + int stream_fd;
> + int ret;
> +
> + igt_assert(pages);
> +
> + ret = mprotect(pages + page_size, page_size, PROT_NONE);
> + igt_assert_eq(ret, 0);
> +
> + stream_fd = __perf_open(drm_fd, ¶m);
> +
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec = 5000000 },
> NULL);
> +
> + /* At this point there should be lots of pending reports to read */
> +
> + /* A read that can return at least one record should result in a
> short
> + * read not an EFAULT if the buffer is smaller than the requested
> read
> + * size...
> + *
> + * Expect to see a sample record here, but at least skip over any
> + * _RECORD_LOST notifications.
> + */
> + do {
> + header = (void *)(pages + page_size - record_size);
> + ret = read(stream_fd,
> + header,
> + page_size);
> + igt_assert(ret > 0);
> + } while (header->type == DRM_I915_PERF_RECORD_OA_REPORT_LOST);
> +
> + igt_assert_eq(ret, record_size);
> +
> + /* A read that can't return a single record because it would result
> + * in a fault on buffer overrun should result in an EFAULT error...
> + */
> + ret = read(stream_fd, pages + page_size - 16, page_size);
> + igt_assert_eq(ret, -1);
> + igt_assert_eq(errno, EFAULT);
> +
> + /* A read that can't return a single record because the buffer is too
> + * small should result in an ENOSPC error..
> + *
> + * Again, skip over _RECORD_LOST records (smaller than record_size/2)
> + */
> + do {
> + header = (void *)(pages + page_size - record_size / 2);
> + ret = read(stream_fd,
> + header,
> + record_size / 2);
> + } while (ret > 0 && header->type ==
> DRM_I915_PERF_RECORD_OA_REPORT_LOST);
> +
> + igt_assert_eq(ret, -1);
> + igt_assert_eq(errno, ENOSPC);
> +
> + close(stream_fd);
> +}
> +
> +static void
> +test_non_sampling_read_error(void)
> +{
> + uint64_t properties[] = {
> + /* XXX: even without periodic sampling we have to
> + * specify at least one sample layout property...
> + */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> +
> + /* XXX: no sampling exponent */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + uint8_t buf[1024];
> +
> + int ret = read(stream_fd, buf, sizeof(buf));
> + igt_assert_eq(ret, -1);
> + igt_assert_eq(errno, EIO);
> +
> + close(stream_fd);
> +}
> +
> +/* Check that attempts to read from a stream while it is disable will return
> + * EIO instead of blocking indefinitely.
> + */
> +static void
> +test_disabled_read_error(void)
> +{
> + int oa_exponent = 5; /* 5 micro seconds */
> + uint64_t properties[] = {
> + /* XXX: even without periodic sampling we have to
> + * specify at least one sample layout property...
> + */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC |
> + I915_PERF_FLAG_DISABLED, /* XXX: open disabled */
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + uint32_t oa_report0[64];
> + uint32_t oa_report1[64];
> + uint32_t buf[128] = { 0 };
> + int ret;
> +
> +
> + ret = read(stream_fd, buf, sizeof(buf));
> + igt_assert_eq(ret, -1);
> + igt_assert_eq(errno, EIO);
> +
> + close(stream_fd);
> +
> +
> + param.flags &= ~I915_PERF_FLAG_DISABLED;
> + stream_fd = __perf_open(drm_fd, ¶m);
> +
> + read_2_oa_reports(stream_fd,
> + I915_OA_FORMAT_A45_B8_C8, 256,
> + oa_exponent,
> + oa_report0,
> + oa_report1,
> + false); /* not just timer reports */
> +
> + do_ioctl(stream_fd, I915_PERF_IOCTL_DISABLE, 0);
> +
> + ret = read(stream_fd, buf, sizeof(buf));
> + igt_assert_eq(ret, -1);
> + igt_assert_eq(errno, EIO);
> +
> + do_ioctl(stream_fd, I915_PERF_IOCTL_ENABLE, 0);
> +
> + read_2_oa_reports(stream_fd,
> + I915_OA_FORMAT_A45_B8_C8, 256,
> + oa_exponent,
> + oa_report0,
> + oa_report1,
> + false); /* not just timer reports */
> +
> + close(stream_fd);
> +}
> +
> +static void
> +test_mi_rpc(void)
> +{
> + uint64_t properties[] = {
> + /* Note: we have to specify at least one sample property even
> + * though we aren't interested in samples in this case.
> + */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> +
> + /* Note: no OA exponent specified in this case */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + drm_intel_bufmgr *bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096);
> + drm_intel_context *context;
> + struct intel_batchbuffer *batch;
> + drm_intel_bo *bo;
> + uint32_t *report32;
> + int ret;
> +
> + drm_intel_bufmgr_gem_enable_reuse(bufmgr);
> +
> + context = drm_intel_gem_context_create(bufmgr);
> + igt_assert(context);
> +
> + batch = intel_batchbuffer_alloc(bufmgr, devid);
> +
> + bo = drm_intel_bo_alloc(bufmgr, "mi_rpc dest bo", 4096, 64);
> +
> + ret = drm_intel_bo_map(bo, true);
> + igt_assert_eq(ret, 0);
> +
> + memset(bo->virtual, 0x80, 4096);
> + drm_intel_bo_unmap(bo);
> +
> + BEGIN_BATCH(3, 1);
> + OUT_BATCH(GEN6_MI_REPORT_PERF_COUNT);
> + OUT_RELOC(bo, I915_GEM_DOMAIN_INSTRUCTION,
> I915_GEM_DOMAIN_INSTRUCTION,
> + 0); /* offset in bytes */
> + OUT_BATCH(0xdeadbeef); /* report ID */
> + ADVANCE_BATCH();
> +
> + intel_batchbuffer_flush_with_context(batch, context);
> +
> + ret = drm_intel_bo_map(bo, false /* write enable */);
> + igt_assert_eq(ret, 0);
> +
> + report32 = bo->virtual;
> + igt_assert_eq(report32[0], 0xdeadbeef); /* report ID */
> + igt_assert_neq(report32[1], 0); /* timestamp */
> +
> + igt_assert_neq(report32[63], 0x80808080); /* end of report */
> + igt_assert_eq(report32[64], 0x80808080); /* after 256 byte report */
Missing a drm_intel_bo_unmap somewhere.
> +
> + intel_batchbuffer_free(batch);
> + drm_intel_gem_context_destroy(context);
> + drm_intel_bufmgr_destroy(bufmgr);
> + close(stream_fd);
> +}
> +
> +static void
> +scratch_buf_init(drm_intel_bufmgr *bufmgr,
> + struct igt_buf *buf,
> + int width, int height,
> + uint32_t color)
> +{
> + size_t stride = width * 4;
> + size_t size = stride * height;
> + drm_intel_bo *bo = drm_intel_bo_alloc(bufmgr, "", size, 4096);
> + int ret;
> +
> + ret = drm_intel_bo_map(bo, true /* writable */);
> + igt_assert_eq(ret, 0);
> +
> + for (int i = 0; i < width * height; i++)
> + ((uint32_t *)bo->virtual)[i] = color;
> +
> + drm_intel_bo_unmap(bo);
> +
> + buf->bo = bo;
> + buf->stride = stride;
> + buf->tiling = I915_TILING_NONE;
> + buf->size = size;
> +}
The whitespace formatting here is pretty sketchy.
> +
> +static void
> +emit_stall_timestamp_and_rpc(struct intel_batchbuffer *batch,
> + drm_intel_bo *dst,
> + int timestamp_offset,
> + int report_dst_offset,
> + uint32_t report_id)
> +{
> + uint32_t pipe_ctl_flags = (PIPE_CONTROL_CS_STALL |
> + PIPE_CONTROL_RENDER_TARGET_FLUSH |
> + PIPE_CONTROL_WRITE_TIMESTAMP);
> +
> + BEGIN_BATCH(5, 1);
> + OUT_BATCH(GFX_OP_PIPE_CONTROL | (5 - 2));
> + OUT_BATCH(pipe_ctl_flags);
> + OUT_RELOC(dst, I915_GEM_DOMAIN_INSTRUCTION,
> I915_GEM_DOMAIN_INSTRUCTION,
> + timestamp_offset);
> + OUT_BATCH(0); /* imm lower */
> + OUT_BATCH(0); /* imm upper */
> + ADVANCE_BATCH();
> +
> + BEGIN_BATCH(3, 1);
> + OUT_BATCH(GEN6_MI_REPORT_PERF_COUNT);
> + OUT_RELOC(dst, I915_GEM_DOMAIN_INSTRUCTION,
> I915_GEM_DOMAIN_INSTRUCTION,
> + report_dst_offset);
> + OUT_BATCH(report_id);
> + ADVANCE_BATCH();
> +}
> +
> +/* Tests the INTEL_performance_query use case where an unprivileged process
> + * should be able to configure the OA unit for per-context metrics (for a
> + * context associated with that process' drm file descriptor) and the
> counters
> + * should only relate to that specific context.
> + */
> +static void
> +test_per_ctx_mi_rpc(void)
> +{
> + uint64_t properties[] = {
> + DRM_I915_PERF_PROP_CTX_HANDLE, UINT64_MAX, /* updated below
> */
> +
> + /* Note: we have to specify at least one sample property even
> + * though we aren't interested in samples in this case
> + */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> +
> + /* Note: no OA exponent specified in this case */
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> +
> + /* should be default, but just to be sure... */
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
> +
> + igt_fork(child, 1) {
> + drm_intel_bufmgr *bufmgr;
> + drm_intel_context *context0, *context1;
> + int stream_fd;
> + struct intel_batchbuffer *batch;
> + struct igt_buf src, dst;
> + drm_intel_bo *bo;
> + uint32_t *report0_32, *report1_32;
> + uint64_t timestamp0_64, timestamp1_64;
> + uint32_t delta_ts64, delta_oa32;
> + uint64_t delta_ts64_ns, delta_oa32_ns;
> + uint32_t delta_delta;
> + int n_samples_written;
> + int width = 800;
> + int height = 600;
> + int ret;
> +
> + igt_drop_root();
> +
> + bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096);
> + drm_intel_bufmgr_gem_enable_reuse(bufmgr);
> +
> + scratch_buf_init(bufmgr, &src, width, height, 0xff0000ff);
> + scratch_buf_init(bufmgr, &dst, width, height, 0x00ff00ff);
> +
> + batch = intel_batchbuffer_alloc(bufmgr, devid);
> +
> + context0 = drm_intel_gem_context_create(bufmgr);
> + igt_assert(context0);
> +
> + context1 = drm_intel_gem_context_create(bufmgr);
> + igt_assert(context1);
> +
> + igt_debug("submitting warm up render_copy\n");
> +
> + /* Submit some early, unmeasured, work to the context we want
> + * to measure to try and catch issues with i915-perf
> + * initializing the HW context ID for filtering.
> + *
> + * We do this because i915-perf single context filtering had
> + * previously only relied on a hook into context pinning to
> + * initialize the HW context ID, instead of also trying to
> + * determine the HW ID while opening the stream, in case it
> + * has already been pinned.
> + *
> + * This wasn't noticed by the previous unit test because we
> + * were opening the stream while the context hadn't been
> + * touched or pinned yet and so it worked out correctly to
> wait
> + * for the pinning hook.
> + *
> + * Now a buggy version of i915-perf will fail to measure
> + * anything for context0 once this initial render_copy() ends
> + * up pinning the context since there won't ever be a pinning
> + * hook callback.
> + */
> + render_copy(batch,
> + context0,
> + &src, 0, 0, width, height,
> + &dst, 0, 0);
> +
> + properties[1] =
> drm_intel_gem_context_get_context_id(context0);
> +
> + igt_debug("opening i915-perf stream\n");
> + stream_fd = __perf_open(drm_fd, ¶m);
> +
> + bo = drm_intel_bo_alloc(bufmgr, "mi_rpc dest bo", 4096, 64);
> +
> + ret = drm_intel_bo_map(bo, true /* write enable */);
> + igt_assert_eq(ret, 0);
> +
> + memset(bo->virtual, 0x80, 4096);
> + drm_intel_bo_unmap(bo);
> +
> + emit_stall_timestamp_and_rpc(batch,
> + bo,
> + 512 /* timestamp offset */,
> + 0, /* report dst offset */
> + 0xdeadbeef); /* report id */
> +
> + /* Explicitly flush here (even though the render_copy() call
> + * will itself flush before/after the copy) to clarify that
> + * that the PIPE_CONTROL + MI_RPC commands will be in a
> + * separate batch from the copy.
> + */
> + intel_batchbuffer_flush_with_context(batch, context0);
> +
> + render_copy(batch,
> + context0,
> + &src, 0, 0, width, height,
> + &dst, 0, 0);
> +
> + /* Another redundant flush to clarify batch bo is free to
> reuse */
> + intel_batchbuffer_flush_with_context(batch, context0);
> +
> + /* submit two copies on the other context to avoid a false
> + * positive in case the driver somehow ended up filtering for
> + * context1
> + */
> + render_copy(batch,
> + context1,
> + &src, 0, 0, width, height,
> + &dst, 0, 0);
> +
> + render_copy(batch,
> + context1,
> + &src, 0, 0, width, height,
> + &dst, 0, 0);
> +
> + /* And another */
> + intel_batchbuffer_flush_with_context(batch, context1);
> +
> + emit_stall_timestamp_and_rpc(batch,
> + bo,
> + 520 /* timestamp offset */,
> + 256, /* report dst offset */
> + 0xbeefbeef); /* report id */
> +
> + intel_batchbuffer_flush_with_context(batch, context0);
> +
> + ret = drm_intel_bo_map(bo, false /* write enable */);
> + igt_assert_eq(ret, 0);
> +
> + report0_32 = bo->virtual;
> + igt_assert_eq(report0_32[0], 0xdeadbeef); /* report ID */
> + igt_assert_neq(report0_32[1], 0); /* timestamp */
> +
> + report1_32 = report0_32 + 64;
> + igt_assert_eq(report1_32[0], 0xbeefbeef); /* report ID */
> + igt_assert_neq(report1_32[1], 0); /* timestamp */
> +
> + print_reports(report0_32, report1_32,
> + lookup_format(I915_OA_FORMAT_A45_B8_C8));
> +
> + /* A40 == N samples written to all render targets */
> + n_samples_written = report1_32[43] - report0_32[43];
> + igt_debug("n samples written = %d\n", n_samples_written);
> + igt_assert_eq(n_samples_written, width * height);
> +
> + igt_debug("timestamp32 0 = %u\n", report0_32[1]);
> + igt_debug("timestamp32 1 = %u\n", report1_32[1]);
> +
> + timestamp0_64 = *(uint64_t *)(((uint8_t *)bo->virtual) +
> 512);
> + timestamp1_64 = *(uint64_t *)(((uint8_t *)bo->virtual) +
> 520);
> +
> + igt_debug("timestamp64 0 = %"PRIu64"\n", timestamp0_64);
> + igt_debug("timestamp64 1 = %"PRIu64"\n", timestamp1_64);
> +
> + delta_ts64 = timestamp1_64 - timestamp0_64;
> + delta_oa32 = report1_32[1] - report0_32[1];
> +
> + /* sanity check that we can pass the delta to timebase_scale
> */
> + igt_assert(delta_ts64 < UINT32_MAX);
> + delta_oa32_ns = timebase_scale(delta_oa32);
> + delta_ts64_ns = timebase_scale(delta_ts64);
> +
> + igt_debug("ts32 delta = %u, = %uns\n",
> + delta_oa32, (unsigned)delta_oa32_ns);
> + igt_debug("ts64 delta = %u, = %uns\n",
> + delta_ts64, (unsigned)delta_ts64_ns);
> +
> + /* The delta as calculated via the PIPE_CONTROL timestamp or
> + * the OA report timestamps should be almost identical but
> + * allow a 320 nanoseconds margin.
> + */
> + delta_delta = delta_ts64_ns > delta_oa32_ns ?
> + (delta_ts64_ns - delta_oa32_ns) :
> + (delta_oa32_ns - delta_ts64_ns);
> + igt_assert(delta_delta <= 320);
> +
Missing a drm_intel_bo_unmap somewhere.
> + intel_batchbuffer_free(batch);
> + drm_intel_gem_context_destroy(context0);
> + drm_intel_gem_context_destroy(context1);
> + drm_intel_bufmgr_destroy(bufmgr);
> + close(stream_fd);
> + }
> +
> + igt_waitchildren();
> +}
> +
> +static void
> +test_rc6_disable(void)
> +{
> + int oa_exponent = 13; /* 1 millisecond */
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + int stream_fd = __perf_open(drm_fd, ¶m);
> + uint64_t n_events_start = read_debugfs_u64_record("i915_drpc_info",
> + "RC6 residency
> since boot");
> + uint64_t n_events_end;
> +
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec = 500000000 },
> NULL);
> +
> + n_events_end = read_debugfs_u64_record("i915_drpc_info",
> + "RC6 residency since boot");
> +
> + igt_assert_eq(n_events_end - n_events_start, 0);
> +
> + close(stream_fd);
> +
> + n_events_start = read_debugfs_u64_record("i915_drpc_info",
> + "RC6 residency since boot");
> +
> + nanosleep(&(struct timespec){ .tv_sec = 0, .tv_nsec = 500000000 },
> NULL);
> +
> + n_events_end = read_debugfs_u64_record("i915_drpc_info",
> + "RC6 residency since boot");
> +
> + igt_assert_neq(n_events_end - n_events_start, 0);
> +}
> +
> +static unsigned
> +read_i915_module_ref(void)
> +{
> + FILE *fp = fopen("/proc/modules", "r");
> + char *line = NULL;
> + size_t line_buf_size = 0;
> + int len = 0;
> + unsigned ref_count;
> +
> + igt_assert(fp);
> +
> + while ((len = getline(&line, &line_buf_size, fp)) > 0) {
> + if (strncmp(line, "i915 ", 5) == 0) {
> + unsigned long mem;
> + int ret = sscanf(line + 5, "%lu %u", &mem,
> &ref_count);
> + igt_assert(ret == 2);
> + goto done;
> + }
> + }
> +
> + igt_assert(!"reached");
> +
> +done:
> + free(line);
> + fclose(fp);
> + return ref_count;
> +}
> +
> +/* check that an open i915 perf stream holds a reference on the drm i915
> module
> + * including in the corner case where the original drm fd has been closed.
> + */
> +static void
> +test_i915_ref_count(void)
> +{
> + int oa_exponent = 13; /* 1 millisecond */
> + uint64_t properties[] = {
> + /* Include OA reports in samples */
> + DRM_I915_PERF_PROP_SAMPLE_OA, true,
> +
> + /* OA unit configuration */
> + DRM_I915_PERF_PROP_OA_METRICS_SET, hsw_render_basic_id,
> + DRM_I915_PERF_PROP_OA_FORMAT, I915_OA_FORMAT_A45_B8_C8,
> + DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
> + };
> + struct drm_i915_perf_open_param param = {
> + .flags = I915_PERF_FLAG_FD_CLOEXEC,
> + .num_properties = sizeof(properties) / 16,
> + .properties_ptr = (uint64_t)properties,
> + };
> + unsigned baseline, ref_count0, ref_count1;
> + int stream_fd;
> + uint32_t oa_report0[64];
> + uint32_t oa_report1[64];
> +
> + close(drm_fd);
> + baseline = read_i915_module_ref();
> + igt_debug("baseline ref count (drm fd closed) = %u\n", baseline);
> +
> + drm_fd = drm_open_driver_render(DRIVER_INTEL);
> + ref_count0 = read_i915_module_ref();
> + igt_debug("initial ref count with drm_fd open = %u\n", ref_count0);
> + igt_assert(ref_count0 > baseline);
> +
> + stream_fd = __perf_open(drm_fd, ¶m);
> + ref_count1 = read_i915_module_ref();
> + igt_debug("ref count after opening i915 perf stream = %u\n",
> ref_count1);
> + igt_assert(ref_count1 > ref_count0);
> +
> + close(drm_fd);
> + ref_count0 = read_i915_module_ref();
> + igt_debug("ref count after closing drm fd = %u\n", ref_count0);
> +
> + igt_assert(ref_count0 > baseline);
> +
> + read_2_oa_reports(stream_fd,
> + I915_OA_FORMAT_A45_B8_C8, 256,
> + oa_exponent,
> + oa_report0,
> + oa_report1,
> + false); /* not just timer reports */
> +
> + close(stream_fd);
> + ref_count0 = read_i915_module_ref();
> + igt_debug("ref count after closing i915 perf stream fd = %u\n",
> ref_count0);
> + igt_assert_eq(ref_count0, baseline);
> +
> + drm_fd = drm_open_driver_render(DRIVER_INTEL);
> +}
> +
> +igt_main
> +{
> + igt_skip_on_simulation();
> +
> + igt_fixture {
> + struct stat sb;
> + int ret;
> +
> + drm_fd = drm_open_driver_render(DRIVER_INTEL);
> + devid = intel_get_drm_devid(drm_fd);
> + device = drm_get_card();
> +
> + igt_require(IS_HASWELL(devid));
> + igt_require(lookup_hsw_render_basic_id());
> +
> + ret = stat("/proc/sys/dev/i915/perf_stream_paranoid", &sb);
> + igt_require(ret == 0);
> + ret = stat("/proc/sys/dev/i915/oa_max_sample_rate", &sb);
> + igt_require(ret == 0);
The absence of the above files would indicate a failure in the kernel,
so would it not be more apt to assert, rather than skip ?
> +
> + gt_frequency_range_save();
> +
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
Don't we also want to ensure that the oa_max_sample_rate is also in a
"good" starting state before we begin, especially since we ensure that
we leave in its default state when cleaning up ?
Anyway, I think it all looks pretty reasonable to me and it looks like
we have a good amount of coverage, so you can have my r-b with Chris'
comment addressed.
> +
> + render_copy = igt_get_render_copyfunc(devid);
> + igt_require_f(render_copy, "no render-copy function\n");
> + }
> +
> + igt_subtest("non-system-wide-paranoid")
> + test_system_wide_paranoid();
> +
> + igt_subtest("invalid-open-flags")
> + test_invalid_open_flags();
> +
> + igt_subtest("invalid-oa-metric-set-id")
> + test_invalid_oa_metric_set_id();
> +
> + igt_subtest("invalid-oa-format-id")
> + test_invalid_oa_format_id();
> +
> + igt_subtest("missing-sample-flags")
> + test_missing_sample_flags();
> +
> + igt_subtest("oa-formats")
> + test_oa_formats();
> +
> + igt_subtest("invalid-oa-exponent")
> + test_invalid_oa_exponent();
> + igt_subtest("low-oa-exponent-permissions")
> + test_low_oa_exponent_permissions();
> + igt_subtest("oa-exponents") {
> + test_oa_exponents(450);
> + test_oa_exponents(550);
> + }
> +
> + igt_subtest("per-context-mode-unprivileged")
> + test_per_context_mode_unprivileged();
> +
> + igt_subtest("buffer-fill")
> + test_buffer_fill();
> +
> + igt_subtest("disabled-read-error")
> + test_disabled_read_error();
> + igt_subtest("non-sampling-read-error")
> + test_non_sampling_read_error();
> +
> + igt_subtest("enable-disable")
> + test_enable_disable();
> +
> + igt_subtest("blocking")
> + test_blocking();
> +
> + igt_subtest("polling")
> + test_polling();
> +
> + igt_subtest("short-reads")
> + test_short_reads();
> +
> + igt_subtest("mi-rpc")
> + test_mi_rpc();
> +
> + igt_subtest("mi-rpc-per-ctx")
> + test_per_ctx_mi_rpc();
> +
> + igt_subtest("i915-ref-count")
> + test_i915_ref_count();
> +
> + igt_subtest("rc6-disable")
> + test_rc6_disable();
> +
> + igt_fixture {
> + /* leave sysctl options in their default state... */
> + write_u64_file("/proc/sys/dev/i915/oa_max_sample_rate",
> 100000);
> + write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
> +
> + gt_frequency_range_restore();
> +
> + close(drm_fd);
> + }
> +}
> --
> 2.10.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
