On Wed, Nov 23, 2016 at 09:48:27PM +0530, Animesh Manna wrote:
> While suspending the device hpd related interrupts are enabled
> to get the interrupt when device is in suspend state.
>
> Though display is in DC9 but system can be in S0 or S0i3 state.
> Hot plug during S0 state will generate de_port_interrupt but if
> system is in S0i3 state then display driver will get hotplug
> interrupt as pcu_hpd_interrupt which will come via pmc. So
> added the interrupt handling for pcu hpd interrupt.
>
> Signed-off-by: Animesh Manna <animesh.ma...@intel.com>
> Signed-off-by: A.Sunil Kamath <sunil.kam...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 56
> ++++++++++++++++++++++++++++++++++++++---
> drivers/gpu/drm/i915/i915_reg.h | 12 +++++++++
> 2 files changed, 65 insertions(+), 3 deletions(-)
> mode change 100644 => 100755 drivers/gpu/drm/i915/i915_irq.c
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> old mode 100644
> new mode 100755
> index cb8a75f..2f9b604
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -110,9 +110,9 @@
>
> /* BXT hpd list */
> static const u32 hpd_bxt[HPD_NUM_PINS] = {
> - [HPD_PORT_A] = BXT_DE_PORT_HP_DDIA,
> - [HPD_PORT_B] = BXT_DE_PORT_HP_DDIB,
> - [HPD_PORT_C] = BXT_DE_PORT_HP_DDIC
> + [HPD_PORT_A] = (BXT_DE_PORT_HP_DDIA | BXT_PCU_DC9_HP_DDIA),
> + [HPD_PORT_B] = (BXT_DE_PORT_HP_DDIB | BXT_PCU_DC9_HP_DDIB),
> + [HPD_PORT_C] = (BXT_DE_PORT_HP_DDIC | BXT_PCU_DC9_HP_DDIC)
hpd_bxt_pcu[]
> };
>
> /* IIR can theoretically queue up two events. Be paranoid. */
> @@ -2463,6 +2463,24 @@ static void bxt_hpd_irq_handler(struct
> drm_i915_private *dev_priv,
> DRM_ERROR("The master control interrupt lied (DE
> PORT)!\n");
> }
>
> + if (master_ctl & GEN8_PCU_IRQ) {
> + iir = I915_READ(GEN8_PCU_IIR);
> + if (iir) {
> + u32 tmp_mask;
> +
Please add a proper pcu irq ack/handler pair. I actually have such a
thing sitting on a branch:
git://github.com/vsyrjala/linux.git pcode_irq
> + I915_WRITE(GEN8_PCU_IIR, iir);
> + ret = IRQ_HANDLED;
> + if (IS_BROXTON(dev_priv)) {
> + tmp_mask = iir & BXT_PCU_DC9_HOTPLUG_MASK;
> + if (tmp_mask)
> + bxt_hpd_irq_handler(dev_priv, tmp_mask,
> + hpd_bxt);
Umm. Does the PCH_HOTPLUG reg actually work in this "hpd redirected to
pcu" state? As in are we going to detect long vs. short pulses correctly
if you just use bxt_hpd_irq_handler()?
> + } else
> + DRM_ERROR("Unexpected PCU interrupt\n");
> + } else
> + DRM_ERROR("The master control interrupt lied (PCU)!\n");
> + }
> +
> for_each_pipe(dev_priv, pipe) {
> u32 flip_done, fault_errors;
>
> @@ -4294,6 +4312,19 @@ void intel_irq_uninstall(struct drm_i915_private
> *dev_priv)
> dev_priv->pm.irqs_enabled = false;
> }
>
> +static void bxt_enable_pcu_interrupt(struct drm_i915_private *dev_priv)
> +{
> + u32 de_pcu_hpd_enable_mask, de_pcu_imr, de_pcu_ier;
> +
> + de_pcu_hpd_enable_mask = GEN9_DE_PCU_PORTA_HOTPLUG |
> + GEN9_DE_PCU_PORTB_HOTPLUG |
> + GEN9_DE_PCU_PORTC_HOTPLUG;
> +
> + de_pcu_imr = (I915_READ(GEN8_PCU_IMR) & 0x0);
> + de_pcu_ier = (I915_READ(GEN8_PCU_IER) | de_pcu_hpd_enable_mask);
You'll want a bdw_update_pcu_irq() or some such thing.
> + GEN5_IRQ_INIT(GEN8_PCU_, de_pcu_imr, de_pcu_ier);
> +}
> +
> /**
> * intel_runtime_pm_disable_interrupts - runtime interrupt disabling
> * @dev_priv: i915 device instance
> @@ -4303,8 +4334,27 @@ void intel_irq_uninstall(struct drm_i915_private
> *dev_priv)
> */
> void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv)
> {
> + unsigned long flags = 0;
> +
> dev_priv->drm.driver->irq_uninstall(&dev_priv->drm);
> dev_priv->pm.irqs_enabled = false;
> +
> + if (IS_BROXTON(dev_priv) && dev_priv->vbt.hpd_wakeup_enabled) {
> +
> + /* Enable HPD related interrupts during DC9 for HPD wakeup */
> +
> + I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL);
> + POSTING_READ(GEN8_MASTER_IRQ);
> +
> + spin_lock_irqsave(&dev_priv->irq_lock, flags);
> + if (dev_priv->display.hpd_irq_setup)
> + dev_priv->display.hpd_irq_setup(dev_priv);
> + spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
> +
> + bxt_enable_pcu_interrupt(dev_priv);
> +
> + dev_priv->pm.irqs_enabled = true;
> + }
> synchronize_irq(dev_priv->drm.irq);
> }
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 3361d7f..df89025 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6030,6 +6030,18 @@ enum {
> #define GEN8_PCU_IIR _MMIO(0x444e8)
> #define GEN8_PCU_IER _MMIO(0x444ec)
>
> +/* BXT PCU DC9 hotplug control */
> +#define BXT_PCU_DC9_HP_DDIA (1<<31)
> +#define BXT_PCU_DC9_HP_DDIB (1<<30)
> +#define BXT_PCU_DC9_HP_DDIC (1<<29)
> +#define BXT_PCU_DC9_HOTPLUG_MASK (BXT_PCU_DC9_HP_DDIA | \
> + BXT_PCU_DC9_HP_DDIB | \
> + BXT_PCU_DC9_HP_DDIC)
> +
> +#define GEN9_DE_PCU_PORTA_HOTPLUG (1 << 31)
> +#define GEN9_DE_PCU_PORTB_HOTPLUG (1 << 30)
> +#define GEN9_DE_PCU_PORTC_HOTPLUG (1 << 29)
Two names for the same bits?
> +
> #define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004)
> /* Required on all Ironlake and Sandybridge according to the B-Spec. */
> #define ILK_ELPIN_409_SELECT (1 << 25)
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
