Jani,
This patch has just a few fixes to make the EDID tests follow the
DP CTS spec. where for the valid EDID it should set the EDID data to
PREFERRED Mode as opposed to STANDARD.
Also it sets the data to EDID if it is EDID test. Fairly simple and
is verified to be passing compliance with DPR-120.
Could you please review this?
Regards
Manasi
On Fri, Dec 09, 2016 at 04:32:58PM -0800, Manasi Navare wrote:
> This patch addresses a few issues from the original patch for
> DP Compliance EDID test support submitted by
> Todd Previte<todd.prev...@gmail.com>
>
> Video Mode requested in the EDID test handler for the EDID Read
> test (CTS 4.2.2.3) should be set to PREFERRED as per the CTS spec.
>
> v2:
> * Added read debugfs data from test_data.edid if its EDID test (Jani NIkula)
> Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Daniel Vetter <daniel.vet...@intel.com>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 5 ++++-
> drivers/gpu/drm/i915/intel_dp.c | 4 ++--
> 2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> b/drivers/gpu/drm/i915/i915_debugfs.c
> index 2c9b056..b2ff532 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -4536,7 +4536,10 @@ static int i915_displayport_test_data_show(struct
> seq_file *m, void *data)
> if (connector->status == connector_status_connected &&
> connector->encoder != NULL) {
> intel_dp = enc_to_intel_dp(connector->encoder);
> - seq_printf(m, "%lx",
> intel_dp->compliance.test_data.edid);
> + if (intel_dp->compliance.test_type ==
> + DP_TEST_LINK_EDID_READ)
> + seq_printf(m, "%lx",
> + intel_dp->compliance.test_data.edid);
> } else
> seq_puts(m, "0");
> }
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index bbf8cdc..fb6f9e5 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3864,7 +3864,7 @@ static uint8_t intel_dp_autotest_video_pattern(struct
> intel_dp *intel_dp)
>
> static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
> {
> - uint8_t test_result = DP_TEST_NAK;
> + uint8_t test_result = DP_TEST_ACK;
> struct intel_connector *intel_connector = intel_dp->attached_connector;
> struct drm_connector *connector = &intel_connector->base;
>
> @@ -3899,7 +3899,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp
> *intel_dp)
> DRM_DEBUG_KMS("Failed to write EDID checksum\n");
>
> test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
> - intel_dp->compliance.test_data.edid =
> INTEL_DP_RESOLUTION_STANDARD;
> + intel_dp->compliance.test_data.edid =
> INTEL_DP_RESOLUTION_PREFERRED;
> }
>
> /* Set test active flag here so userspace doesn't interrupt things */
> --
> 1.9.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
