From: Pierre-Louis Bossart <pierre-louis.boss...@linux.intel.com>
Enable unmute/mute amp notification. This doesn't seem to affect
HDMI support so this is done unconditionally.
An earlier version of this patch set a chicken bit at address 0x62F38
prior to the mute/unmute but this register doesn't seem to do anything
so this phase was removed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.boss...@linux.intel.com>
Signed-off-by: Takashi Iwai <ti...@suse.de>
---
drivers/gpu/drm/i915/i915_reg.h | 10 ++++++++++
drivers/gpu/drm/i915/intel_lpe_audio.c | 17 +++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a9ffc8df241b..8fcc80cb864b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2061,6 +2061,16 @@ enum skl_disp_power_wells {
#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000)
#define I915_HDMI_LPE_AUDIO_SIZE 0x1000
+/* DisplayPort Audio w/ LPE */
+#define VLV_AUD_PORT_EN_B_DBG (VLV_DISPLAY_BASE + 0x62F20)
+#define VLV_AUD_PORT_EN_C_DBG (VLV_DISPLAY_BASE + 0x62F30)
+#define VLV_AUD_PORT_EN_D_DBG (VLV_DISPLAY_BASE + 0x62F34)
+#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT3((port) - PORT_B, \
+ VLV_AUD_PORT_EN_B_DBG, \
+ VLV_AUD_PORT_EN_C_DBG, \
+ VLV_AUD_PORT_EN_D_DBG)
+#define VLV_AMP_MUTE (1 << 1)
+
#define GEN6_BSD_RNCID _MMIO(0x12198)
#define GEN7_FF_THREAD_MODE _MMIO(0x20a0)
diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c
b/drivers/gpu/drm/i915/intel_lpe_audio.c
index 245523e14418..f95624a46f27 100644
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -337,15 +337,25 @@ void intel_lpe_audio_notify(struct drm_i915_private
*dev_priv,
{
unsigned long irq_flags;
struct intel_hdmi_lpe_audio_pdata *pdata = NULL;
+ u32 audio_enable;
+ i915_reg_t mmio;
if (!HAS_LPE_AUDIO(dev_priv))
return;
+ if (port == PORT_A) {
+ DRM_ERROR("PORT_A is not valid for HDMI/DP usages\n");
+ return;
+ }
+
pdata = dev_get_platdata(
&(dev_priv->lpe_audio.platdev->dev));
spin_lock_irqsave(&pdata->lpe_audio_slock, irq_flags);
+ mmio = VLV_AUD_PORT_EN_DBG(port);
+ audio_enable = I915_READ(mmio);
+
if (eld != NULL) {
memcpy(pdata->eld.eld_data, eld,
HDMI_MAX_ELD_BYTES);
@@ -357,11 +367,18 @@ void intel_lpe_audio_notify(struct drm_i915_private
*dev_priv,
pdata->tmds_clock_speed = tmds_clk_speed;
if (link_rate)
pdata->link_rate = link_rate;
+
+ /* Unmute the amp for both DP and HDMI */
+ I915_WRITE(mmio, audio_enable & ~VLV_AMP_MUTE);
+
} else {
memset(pdata->eld.eld_data, 0,
HDMI_MAX_ELD_BYTES);
pdata->hdmi_connected = false;
pdata->dp_output = false;
+
+ /* Mute the amp for both DP and HDMI */
+ I915_WRITE(mmio, audio_enable | VLV_AMP_MUTE);
}
if (pdata->notify_audio_lpe)
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
