From: Markus Elfring <elfr...@users.sourceforge.net>
Date: Thu, 4 May 2017 13:20:47 +0200
Some strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>
---
drivers/gpu/drm/i915/i915_debugfs.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index 4adf96be9146..296108464f2b 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -149,7 +149,7 @@ describe_obj(struct seq_file *m, struct drm_i915_gem_object
*obj)
}
seq_printf(m, " (pinned x %d)", pin_count);
if (obj->pin_display)
- seq_printf(m, " (display)");
+ seq_puts(m, " (display)");
list_for_each_entry(vma, &obj->vma_list, obj_link) {
if (!drm_mm_node_allocated(&vma->node))
continue;
@@ -581,8 +581,10 @@ static int i915_gem_pageflip_info(struct seq_file *m, void
*data)
intel_engine_last_submit(engine),
intel_engine_get_seqno(engine),
i915_gem_request_completed(work->flip_queued_req));
- } else
- seq_printf(m, "Flip not associated with any
ring\n");
+ } else {
+ seq_puts(m,
+ "Flip not associated with any ring\n");
+ }
seq_printf(m, "Flip queued on frame %d, (was ready on
frame %d), now %d\n",
work->flip_queued_vblank,
work->flip_ready_vblank,
@@ -2048,7 +2050,7 @@ static int i915_dump_lrc(struct seq_file *m, void *unused)
int ret;
if (!i915.enable_execlists) {
- seq_printf(m, "Logical Ring Contexts are disabled\n");
+ seq_puts(m, "Logical Ring Contexts are disabled\n");
return 0;
}
@@ -2402,7 +2404,7 @@ static int i915_guc_load_status_info(struct seq_file *m,
void *data)
if (!HAS_GUC_UCODE(dev_priv))
return 0;
- seq_printf(m, "GuC firmware status:\n");
+ seq_puts(m, "GuC firmware status:\n");
seq_printf(m, "\tpath: %s\n",
guc_fw->path);
seq_printf(m, "\tfetch: %s\n",
@@ -2510,7 +2512,7 @@ static int i915_guc_info(struct seq_file *m, void *data)
return 0;
}
- seq_printf(m, "Doorbell map:\n");
+ seq_puts(m, "Doorbell map:\n");
seq_printf(m, "\t%*pb\n", GUC_NUM_DOORBELLS, guc->doorbell_bitmap);
seq_printf(m, "Doorbell next cacheline: 0x%x\n\n", guc->db_cacheline);
@@ -2521,7 +2523,7 @@ static int i915_guc_info(struct seq_file *m, void *data)
seq_printf(m, "GuC last action error code: %d\n", guc->action_err);
total = 0;
- seq_printf(m, "\nGuC submissions:\n");
+ seq_puts(m, "\nGuC submissions:\n");
for_each_engine(engine, dev_priv, id) {
u64 submissions = guc->submissions[id];
total += submissions;
@@ -2795,7 +2797,7 @@ static int i915_runtime_pm_status(struct seq_file *m,
void *unused)
seq_printf(m, "Usage count: %d\n",
atomic_read(&dev_priv->drm.dev->power.usage_count));
#else
- seq_printf(m, "Device Power Management (CONFIG_PM) disabled\n");
+ seq_puts(m, "Device Power Management (CONFIG_PM) disabled\n");
#endif
seq_printf(m, "PCI device power state: %s [%d]\n",
pci_power_name(pdev->current_state),
@@ -2914,7 +2916,7 @@ static void intel_encoder_info(struct seq_file *m,
drm_get_connector_status_name(connector->status));
if (connector->status == connector_status_connected) {
struct drm_display_mode *mode = &crtc->mode;
- seq_printf(m, ", mode:\n");
+ seq_puts(m, ", mode:\n");
intel_seq_print_mode(m, 2, mode);
} else {
seq_putc(m, '\n');
@@ -2945,7 +2947,7 @@ static void intel_panel_info(struct seq_file *m, struct
intel_panel *panel)
{
struct drm_display_mode *mode = panel->fixed_mode;
- seq_printf(m, "\tfixed mode:\n");
+ seq_puts(m, "\tfixed mode:\n");
intel_seq_print_mode(m, 2, mode);
}
@@ -3038,7 +3040,7 @@ static void intel_connector_info(struct seq_file *m,
break;
}
- seq_printf(m, "\tmodes:\n");
+ seq_puts(m, "\tmodes:\n");
list_for_each_entry(mode, &connector->modes, head)
intel_seq_print_mode(m, 2, mode);
}
@@ -3266,9 +3268,7 @@ static int i915_engine_info(struct seq_file *m, void
*unused)
engine->timeline->inflight_seqnos);
rcu_read_lock();
-
- seq_printf(m, "\tRequests:\n");
-
+ seq_puts(m, "\tRequests:\n");
rq = list_first_entry(&engine->timeline->requests,
struct drm_i915_gem_request, link);
if (&rq->link != &engine->timeline->requests)
@@ -3346,7 +3346,7 @@ static int i915_engine_info(struct seq_file *m, void
*unused)
engine->execlist_port[0].count);
print_request(m, rq, "rq: ");
} else {
- seq_printf(m, "\t\tELSP[0] idle\n");
+ seq_puts(m, "\t\tELSP[0] idle\n");
}
rq = READ_ONCE(engine->execlist_port[1].request);
if (rq) {
@@ -3354,7 +3354,7 @@ static int i915_engine_info(struct seq_file *m, void
*unused)
engine->execlist_port[1].count);
print_request(m, rq, "rq: ");
} else {
- seq_printf(m, "\t\tELSP[1] idle\n");
+ seq_puts(m, "\t\tELSP[1] idle\n");
}
rcu_read_unlock();
@@ -3465,7 +3465,7 @@ static int i915_shared_dplls_info(struct seq_file *m,
void *unused)
seq_printf(m, "DPLL%i: %s, id: %i\n", i, pll->name, pll->id);
seq_printf(m, " crtc_mask: 0x%08x, active: 0x%x, on: %s\n",
pll->state.crtc_mask, pll->active_mask,
yesno(pll->on));
- seq_printf(m, " tracked hardware state:\n");
+ seq_puts(m, " tracked hardware state:\n");
seq_printf(m, " dpll: 0x%08x\n", pll->state.hw_state.dpll);
seq_printf(m, " dpll_md: 0x%08x\n",
pll->state.hw_state.dpll_md);
--
2.12.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
