To get HDMI YCBCR420 output, the PIPEMISC register should be
programmed to:
- Generate YCBCR output (bit 11)
- In case of YCBCR420 outputs, it should be programmed in full
blend mode to use the scaler in 5x3 ratio (bits 26 and 27)
This patch:
- Adds definition of these bits.
- Programs PIPEMISC for YCBCR420 outputs.
- Adds readouts to compare HW and SW states.
V2: rebase
V3: rebase
V4: rebase
V5: added r-b from Ander
V6: Handle only YCBCR420 outputs (ville)
V7: rebase
V8: Addressed review comments from Ville
- Add readouts for state->ycbcr420 and 420 pixel_clock.
- Handle warning due to mismatch in clock for ycbcr420 clock.
- Rename PIPEMISC macros to match the Bspec.
- Add a debug print stating if YCBCR 4:2:0 output enabled.
Added r-b from Ville
Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselv...@gmail.com>
Cc: Daniel Vetter <daniel.vet...@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselv...@gmail.com>
Reviewed-by: Ville Syrjala <ville.syrj...@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sha...@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 ++
drivers/gpu/drm/i915/intel_display.c | 55 ++++++++++++++++++++++++++++++++++--
2 files changed, 55 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c712d01..6dfcdd3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5227,6 +5227,9 @@ enum {
#define _PIPE_MISC_A 0x70030
#define _PIPE_MISC_B 0x71030
+#define PIPEMISC_YUV420_ENABLE (1<<27)
+#define PIPEMISC_YUV420_MODE_BLEND (1<<26)
+#define PIPEMISC_OUTPUT_YUV (1<<11)
#define PIPEMISC_DITHER_BPC_MASK (7<<5)
#define PIPEMISC_DITHER_8_BPC (0<<5)
#define PIPEMISC_DITHER_10_BPC (1<<5)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index d78f1c2..788502a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6216,7 +6216,6 @@ static uint32_t ilk_pipe_pixel_rate(const struct
intel_crtc_state *pipe_config)
* We only use IF-ID interlacing. If we ever use
* PF-ID we'll need to adjust the pixel_rate here.
*/
-
if (pipe_config->pch_pfit.enabled) {
uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
uint32_t pfit_size = pipe_config->pch_pfit.size;
@@ -8076,6 +8075,7 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *config = intel_crtc->config;
if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
u32 val = 0;
@@ -8101,6 +8101,12 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
if (intel_crtc->config->dither)
val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
+ if (config->ycbcr420) {
+ val |= PIPEMISC_OUTPUT_YUV |
+ PIPEMISC_YUV420_ENABLE |
+ PIPEMISC_YUV420_MODE_BLEND;
+ }
+
I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
}
}
@@ -9170,6 +9176,10 @@ static bool haswell_get_pipe_config(struct intel_crtc
*crtc,
pipe_config->scaler_state.scaler_users &= ~(1 <<
SKL_CRTC_INDEX);
}
+ if (IS_GEMINILAKE(dev_priv))
+ pipe_config->ycbcr420 = I915_READ(PIPEMISC(crtc->pipe)) &
+ PIPEMISC_YUV420_ENABLE;
+
power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
power_domain_mask |= BIT_ULL(power_domain);
@@ -11377,6 +11387,9 @@ static void intel_dump_pipe_config(struct intel_crtc
*crtc,
pipe_config->fdi_lanes,
&pipe_config->fdi_m_n);
+ if (pipe_config->ycbcr420)
+ DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
+
if (intel_crtc_has_dp_encoder(pipe_config)) {
intel_dump_m_n_config(pipe_config, "dp m_n",
pipe_config->lane_count, &pipe_config->dp_m_n);
@@ -11704,6 +11717,22 @@ intel_modeset_update_crtc_state(struct
drm_atomic_state *state)
}
}
+static bool intel_420_clock_check(int clock1, int clock2)
+{
+ int diff;
+
+ if (clock1 == clock2 * 2)
+ return true;
+
+ clock2 *= 2;
+ diff = abs(clock1 - clock2);
+
+ if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
+ return true;
+
+ return false;
+}
+
static bool intel_fuzzy_clock_check(int clock1, int clock2)
{
int diff;
@@ -11832,6 +11861,18 @@ intel_pipe_config_compare(struct drm_i915_private
*dev_priv,
ret = false; \
}
+#define PIPE_CONF_CHECK_CLOCK_420(name) \
+ do { \
+ if (!intel_420_clock_check(current_config->name, \
+ pipe_config->name)) { \
+ pipe_config_err(adjust, __stringify(name), \
+ "(expected %i, found %i)\n", \
+ current_config->name, \
+ pipe_config->name); \
+ ret = false; \
+ } \
+ } while (0)
+
#define PIPE_CONF_CHECK_M_N(name) \
if (!intel_compare_link_m_n(¤t_config->name, \
&pipe_config->name,\
@@ -11983,7 +12024,10 @@ intel_pipe_config_compare(struct drm_i915_private
*dev_priv,
}
PIPE_CONF_CHECK_I(scaler_state.scaler_id);
- PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate);
+ if (current_config->ycbcr420)
+ PIPE_CONF_CHECK_CLOCK_420(pixel_rate);
+ else
+ PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate);
}
/* BDW+ don't expose a synchronous way to read the state */
@@ -12009,7 +12053,11 @@ intel_pipe_config_compare(struct drm_i915_private
*dev_priv,
if (IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5)
PIPE_CONF_CHECK_I(pipe_bpp);
- PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
+ /* YCBCR 420 pixel clock is half of the actual mode */
+ if (current_config->ycbcr420)
+ PIPE_CONF_CHECK_CLOCK_420(base.adjusted_mode.crtc_clock);
+ else
+ PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
#undef PIPE_CONF_CHECK_X
@@ -12018,6 +12066,7 @@ intel_pipe_config_compare(struct drm_i915_private
*dev_priv,
#undef PIPE_CONF_CHECK_FLAGS
#undef PIPE_CONF_CHECK_CLOCK_FUZZY
#undef PIPE_CONF_QUIRK
+#undef PIPE_CONF_CHECK_CLOCK_420
return ret;
}
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
