Use _PIPE macro to get correct register definition for IBX/CPT, discard
old variable "i" way.

Signed-off-by: Wang Xingchao <xingchao.w...@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |   24 ++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_display.c |   17 ++++++-----------
 2 files changed, 30 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0cf09ad..3d7a6a4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4247,7 +4247,15 @@
 #define G4X_HDMIW_HDMIEDID             0x6210C
 
 #define IBX_HDMIW_HDMIEDID_A           0xE2050
+#define IBX_HDMIW_HDMIEDID_B           0xE2150
+#define IBX_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
+                                       IBX_HDMIW_HDMIEDID_A, \
+                                       IBX_HDMIW_HDMIEDID_B)
 #define IBX_AUD_CNTL_ST_A              0xE20B4
+#define IBX_AUD_CNTL_ST_B              0xE21B4
+#define IBX_AUD_CNTL_ST(pipe) _PIPE(pipe, \
+                                       IBX_AUD_CNTL_ST_A, \
+                                       IBX_AUD_CNTL_ST_B)
 #define IBX_ELD_BUFFER_SIZE            (0x1f << 10)
 #define IBX_ELD_ADDRESS                        (0x1f << 5)
 #define IBX_ELD_ACK                    (1 << 4)
@@ -4256,7 +4264,15 @@
 #define IBX_CP_READYB                  (1 << 1)
 
 #define CPT_HDMIW_HDMIEDID_A           0xE5050
+#define CPT_HDMIW_HDMIEDID_B           0xE5150
+#define CPT_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
+                                       CPT_HDMIW_HDMIEDID_A, \
+                                       CPT_HDMIW_HDMIEDID_B)
 #define CPT_AUD_CNTL_ST_A              0xE50B4
+#define CPT_AUD_CNTL_ST_B              0xE51B4
+#define CPT_AUD_CNTL_ST(pipe) _PIPE(pipe, \
+                                       CPT_AUD_CNTL_ST_A, \
+                                       CPT_AUD_CNTL_ST_B)
 #define CPT_AUD_CNTRL_ST2              0xE50C0
 
 /* These are the 4 32-bit write offset registers for each stream
@@ -4266,7 +4282,15 @@
 #define GEN7_SO_WRITE_OFFSET(n)                (0x5280 + (n) * 4)
 
 #define IBX_AUD_CONFIG_A                       0xe2000
+#define IBX_AUD_CONFIG_B                       0xe2100
+#define IBX_AUD_CFG(pipe) _PIPE(pipe, \
+                                       IBX_AUD_CONFIG_A, \
+                                       IBX_AUD_CONFIG_B)
 #define CPT_AUD_CONFIG_A                       0xe5000
+#define CPT_AUD_CONFIG_B                       0xe5100
+#define CPT_AUD_CFG(pipe) _PIPE(pipe, \
+                                       CPT_AUD_CONFIG_A, \
+                                       CPT_AUD_CONFIG_B)
 #define   AUD_CONFIG_N_VALUE_INDEX             (1 << 29)
 #define   AUD_CONFIG_N_PROG_ENABLE             (1 << 28)
 #define   AUD_CONFIG_UPPER_N_SHIFT             20
diff --git a/drivers/gpu/drm/i915/intel_display.c 
b/drivers/gpu/drm/i915/intel_display.c
index b635bf6..103de56 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5083,9 +5083,9 @@ static void ironlake_write_eld(struct drm_connector 
*connector,
        int pipe = to_intel_crtc(crtc)->pipe;
 
        if (HAS_PCH_IBX(connector->dev)) {
-               hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
-               aud_config = IBX_AUD_CONFIG_A;
-               aud_cntl_st = IBX_AUD_CNTL_ST_A;
+               hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
+               aud_config = IBX_AUD_CFG(pipe);
+               aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
                aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
        } else if (IS_HASWELL(dev)) {
                hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
@@ -5093,9 +5093,9 @@ static void ironlake_write_eld(struct drm_connector 
*connector,
                aud_config = HSW_AUD_CFG(pipe);
                aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
        } else {
-               hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
-               aud_config = CPT_AUD_CONFIG_A;
-               aud_cntl_st = CPT_AUD_CNTL_ST_A;
+               hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
+               aud_config = CPT_AUD_CFG(pipe);
+               aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
                aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
        }
 
@@ -5127,11 +5127,6 @@ static void ironlake_write_eld(struct drm_connector 
*connector,
                I915_WRITE(aud_config, tmp);
        }
 
-       i = to_intel_crtc(crtc)->pipe;
-       hdmiw_hdmiedid += i * 0x100;
-       aud_cntl_st += i * 0x100;
-       aud_config += i * 0x100;
-
        DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
 
        i = I915_READ(aud_cntl_st);
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to