On Wed, 08 Aug 2012, Paulo Zanoni <[email protected]> wrote:
> From: Paulo Zanoni <[email protected]>
>
> If we don't find the exact refresh rate, go with the next one. This
> makes some modes work for me. They won't have the best settings, but
> will at least have something. Just returning from this function when
> we don't find the perfect settings does not help us at all.
>
> Signed-off-by: Paulo Zanoni <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 33 ++++++++++++++-------------------
> 1 file changed, 14 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index ff03a3a..db242cf 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -267,7 +267,8 @@ struct wrpll_tmds_clock {
> u16 r2; /* Reference divider */
> };
>
> -/* Table of matching values for WRPLL clocks programming for each frequency
> */
> +/* Table of matching values for WRPLL clocks programming for each frequency.
> + * The code assumes this table is sorted. */
I spotted some duplicate lines in the table. Perhaps you could remove
them while at it?
> static const struct wrpll_tmds_clock wrpll_tmds_clock_table[] = {
> {19750, 38, 25, 18},
> {20000, 48, 32, 18},
> @@ -658,7 +659,7 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> int port = intel_hdmi->ddi_port;
> int pipe = intel_crtc->pipe;
> - int p, n2, r2, valid=0;
> + int p, n2, r2;
> u32 temp, i;
>
> /* On Haswell, we need to enable the clocks and prepare DDI function to
> @@ -666,26 +667,20 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
> */
> DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe
> %c\n", port_name(port), pipe_name(pipe));
>
> - for (i=0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++) {
> - if (crtc->mode.clock == wrpll_tmds_clock_table[i].clock) {
> - p = wrpll_tmds_clock_table[i].p;
> - n2 = wrpll_tmds_clock_table[i].n2;
> - r2 = wrpll_tmds_clock_table[i].r2;
> + for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++)
> + if (crtc->mode.clock <= wrpll_tmds_clock_table[i].clock)
> + break;
>
> - DRM_DEBUG_KMS("WR PLL clock: found settings for %dKHz
> refresh rate: p=%d, n2=%d, r2=%d\n",
> - crtc->mode.clock,
> - p, n2, r2);
You drop this debug message. Is it intentional? The below DRM_INFO will
only be printed if an exact match is not found.
BR,
Jani.
> + if (i == ARRAY_SIZE(wrpll_tmds_clock_table))
> + i--;
>
> - valid = 1;
> - break;
> - }
> - }
> + if (wrpll_tmds_clock_table[i].clock != crtc->mode.clock)
> + DRM_INFO("WR PLL: using settings for %dKHz on %dKHz mode\n",
> + wrpll_tmds_clock_table[i].clock, crtc->mode.clock);
>
> - if (!valid) {
> - DRM_ERROR("Unable to find WR PLL clock settings for %dKHz
> refresh rate\n",
> - crtc->mode.clock);
> - return;
> - }
> + p = wrpll_tmds_clock_table[i].p;
> + n2 = wrpll_tmds_clock_table[i].n2;
> + r2 = wrpll_tmds_clock_table[i].r2;
>
> /* Enable LCPLL if disabled */
> temp = I915_READ(LCPLL_CTL);
> --
> 1.7.11.2
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
