On Thu, 2017-07-06 at 13:54 -0700, Rodrigo Vivi wrote:
> One warning is that in order to get DPLL Link rates
> 3240 and 4050 that allows 648000 and 810000 is that:
> "Some SKUs may require elevated I/O voltage to support
> this."
I also found a mention in BSpec
"Frequencies over 5.4 GHz only supported on certain DDI ports and SKUs"
The only difference between SKUs that I spotted was related to DDI D
port speeds. If BSpec is correct, then we should somehow separate the
max port speeds for DDI D port.
>
> v2: Rebase on top of source_rates changes.
>
> Cc: Clint Taylor <clinton.a.tay...@intel.com>
> Cc: Mika Kahola <mika.kah...@intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.v...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index 2d42d09..4355bdf 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -97,6 +97,9 @@ struct dp_link_dpll {
> 324000, 432000, 540000 };
> static const int skl_rates[] = { 162000, 216000, 270000,
> 324000, 432000, 540000 };
> +static const int cnl_rates[] = { 162000, 216000, 270000,
> + 324000, 432000, 540000,
> + 648000, 810000 };
> static const int default_rates[] = { 162000, 270000, 540000 };
>
> /**
> @@ -238,6 +241,9 @@ int intel_dp_max_lane_count(struct intel_dp
> *intel_dp)
> if (IS_GEN9_LP(dev_priv)) {
> source_rates = bxt_rates;
> size = ARRAY_SIZE(bxt_rates);
> + } else if (IS_CANNONLAKE(dev_priv)) {
> + source_rates = cnl_rates;
> + size = ARRAY_SIZE(cnl_rates);
> } else if (IS_GEN9_BC(dev_priv)) {
> source_rates = skl_rates;
> size = ARRAY_SIZE(skl_rates);
--
Mika Kahola - Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
