drm_edid_to_eld() initializes the connector ELD to zero, overwriting the ELD connector type initialized in intel_audio_codec_enable(). If userspace does getconnector and thus get_modes after modeset, a subsequent audio component i915_audio_component_get_eld() call will receive an ELD without the connector type properly set. It's fine for HDMI, but screws up audio for DP.
Always set the ELD connector type at intel_connector_update_modes() based on the connector type. We can drop the connector type update from intel_audio_codec_enable(). Credits to Joseph Nuzman <[email protected]> for figuring this out. Cc: Ville Syrjälä <[email protected]> Cc: Joseph Nuzman <[email protected]> Reported-by: Joseph Nuzman <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583 Signed-off-by: Jani Nikula <[email protected]> --- We'll still need to cache and fix the av sync delay as well, but we need adjusted mode for that. --- drivers/gpu/drm/i915/intel_audio.c | 5 ----- drivers/gpu/drm/i915/intel_modes.c | 17 +++++++++++++++++ 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index d805b6e6fe71..27743be5b768 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -606,11 +606,6 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, connector->encoder->base.id, connector->encoder->name); - /* ELD Conn_Type */ - connector->eld[5] &= ~(3 << 2); - if (intel_crtc_has_dp_encoder(crtc_state)) - connector->eld[5] |= (1 << 2); - connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2; if (dev_priv->display.audio_codec_enable) diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 951e834dd274..28a778b785ac 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -30,6 +30,21 @@ #include "intel_drv.h" #include "i915_drv.h" +static void intel_connector_update_eld_conn_type(struct drm_connector *connector) +{ + u8 conn_type; + + if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort || + connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + conn_type = DRM_ELD_CONN_TYPE_DP; + } else { + conn_type = DRM_ELD_CONN_TYPE_HDMI; + } + + connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] &= ~DRM_ELD_CONN_TYPE_MASK; + connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= conn_type; +} + /** * intel_connector_update_modes - update connector from edid * @connector: DRM connector device to use @@ -44,6 +59,8 @@ int intel_connector_update_modes(struct drm_connector *connector, ret = drm_add_edid_modes(connector, edid); drm_edid_to_eld(connector, edid); + intel_connector_update_eld_conn_type(connector); + return ret; } -- 2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
