Regards
Shashank
On 11/17/2017 5:08 PM, Ville Syrjälä wrote:
On Fri, Nov 17, 2017 at 08:53:54AM +0530, Sharma, Shashank wrote:
Regards
Shashank
On 11/16/2017 9:56 PM, Ville Syrjälä wrote:
On Thu, Nov 16, 2017 at 08:31:36PM +0530, Sharma, Shashank wrote:
Regards
Shashank
On 11/13/2017 10:34 PM, Ville Syrjala wrote:
From: Ville Syrjälä <ville.syrj...@linux.intel.com>
If the user mode would specify an aspect ratio other than 4:3 or 16:9
we now silently ignore it. Maybe a better apporoach is to return an
error? Let's try that.
Also we must be careful that we don't try to send illegal picture
aspect in the infoframe as it's only capable of signalling none,
4:3, and 16:9. Currently we're sending these bogus infoframes
whenever the cea mode specifies some other aspect ratio.
Cc: Shashank Sharma <shashank.sha...@intel.com>
Cc: Sean Paul <seanp...@chromium.org>
Cc: Jose Abreu <jose.ab...@synopsys.com>
Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
Cc: Emil Velikov <emil.l.veli...@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/drm_edid.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 00aa98f3e55d..bafb3ee4ea97 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4786,6 +4786,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct
hdmi_avi_infoframe *frame,
const struct drm_display_mode *mode,
bool is_hdmi2_sink)
{
+ enum hdmi_picture_aspect picture_aspect;
int err;
if (!frame || !mode)
@@ -4828,13 +4829,23 @@ drm_hdmi_avi_infoframe_from_display_mode(struct
hdmi_avi_infoframe *frame,
* Populate picture aspect ratio from either
* user input (if specified) or from the CEA mode list.
*/
- if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
- mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
- frame->picture_aspect = mode->picture_aspect_ratio;
- else if (frame->video_code > 0)
- frame->picture_aspect = drm_get_cea_aspect_ratio(
- frame->video_code);
+ picture_aspect = mode->picture_aspect_ratio;
+ if (picture_aspect == HDMI_PICTURE_ASPECT_NONE)
+ picture_aspect = drm_get_cea_aspect_ratio(frame->video_code);
This is slightly going in the loop.
- During the modeset the driver cant specify the aspect ratio
information, as DRM layer lacks this support.
- So we fill the VIC field, by comparing the mode with the
DRM_CEA_MODES[] list. This will pick the first mode
available in the list (regardless of its aspect ratio), and fill the
VIC, as we don't consider aspect ratio while comparing timings.
- Again, now while sending the aspect ratio, we are picking up the VIC,
which may not be correct.
So if we have 720x480(4:3) and 720x480(16:9) in the list, as 4:3 is
first in list, we will always pick 4:3 aspect ratio.
Yes. The user didn't care about the aspect ratio (or rather couldn't
specify one) so we just pick one. Which is exactly what we've been
doing ever since we started sending the VIC in the infoframe.
Correct, and we are hoping that this should be better (if not fixed)
with the aspect ratio support
patches + DRM cap. If the userspace doesn't set the cap, then anyways
there is no aspect ratio
field available, and VIC would be always 0, as this becomes a Non CEA mode.
Or do you think it would be a better idea to send some VIC instead of No
VIC, when userspace doesn't
set the DRM cap for aspect ratio ?
Yes. That's the current behaviour.
IIRC some crappy amplifiers etc. with HDMI passthrough don't even work
correctly unless VIC is specified. Hence we do want to send it whenever
possible.
Ok, in this case this make sense, and then I kindof agree with what this
patch is trying to do.
Reviewed-by: Shashank Sharma <shashank.sha...@intel.com>
- Shashank
- Shashank
+ /*
+ * The infoframe can't convey anything but none, 4:3
+ * and 16:9, so if the user has asked for anything else
+ * we can only satisfy it by specifying the right VIC.
+ */
+ if (picture_aspect > HDMI_PICTURE_ASPECT_16_9) {
+ if (picture_aspect !=
+ drm_get_cea_aspect_ratio(frame->video_code))
+ return -EINVAL;
+ picture_aspect = HDMI_PICTURE_ASPECT_NONE;
+ }
+
+ frame->picture_aspect = picture_aspect;
frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
