On Thu, Oct 18, 2012 at 06:21:31PM -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <[email protected]>
>
> Before Haswell we used to have the CPU pipes and the PCH transcoders.
> We had the same amount of pipes and transcoders, and there was a 1:1
> mapping between them. After Haswell what we used to call CPU pipe was
> split into CPU pipe and CPU transcoder. So now we have 3 CPU pipes (A,
> B and C), 4 CPU transcoders (A, B, C and EDP) and 1 PCH transcoder
> (only used for VGA).
>
> For all the outputs except for EDP we have an 1:1 mapping on the CPU
> pipes and CPU transcoders, so if you're using CPU pipe A you have to
> use CPU transcoder A. When have an eDP output you have to use
> transcoder EDP and you can attach this CPU transcoder to any of the 3
> CPU pipes. When using VGA you need to select a pair of matching CPU
> pipes/transcoders (A/A, B/B, C/C) and you also need to enable/use the
> PCH transcoder.
>
> For now we're just creating the cpu_transcoder definitions and setting
> cpu_transcoder to TRANSCODER_EDP on DDI eDP code, but none of the
> registers was ported to use transcoder instead of pipe. The goal is to
> keep the code backwards-compatible since on all cases except when
> using eDP we must have pipe == cpu_transcoder.
>
> Signed-off-by: Paulo Zanoni <[email protected]>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 8 ++++++++
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> drivers/gpu/drm/i915/intel_display.c | 18 ++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 3 +++
> 4 files changed, 30 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 4728d30..922ab8d 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -58,6 +58,14 @@ enum pipe {
> };
> #define pipe_name(p) ((p) + 'A')
>
> +enum transcoder {
> + TRANSCODER_A = 0,
> + TRANSCODER_B,
> + TRANSCODER_C,
> + TRANSCODER_EDP = 0xF,
> +};
> +#define transcoder_name(t) ((t) + 'A')
> +
> enum plane {
> PLANE_A = 0,
> PLANE_B,
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c31ee5b..c3fd536 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -26,6 +26,7 @@
> #define _I915_REG_H_
>
> #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
> +#define _TRANSCODER(tran, a, b) ((a) + (tran)*((b)-(a)))
>
> #define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index c2c219b..6bf5ea8 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -927,6 +927,15 @@ intel_vlv_find_best_pll(const intel_limit_t *limit,
> struct drm_crtc *crtc,
> return true;
> }
>
> +enum transcoder pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
> + enum pipe pipe)
> +{
> + struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +
> + return intel_crtc->cpu_transcoder;
> +}
We need int intel_ prefix on this to avoid polluting the global namespace.
-Daniel
> +
> static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3336,6 +3345,9 @@ static void ironlake_crtc_off(struct drm_crtc *crtc)
>
> static void haswell_crtc_off(struct drm_crtc *crtc)
> {
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +
> + intel_crtc->cpu_transcoder = intel_crtc->pipe;
> intel_ddi_put_crtc_pll(crtc);
> }
>
> @@ -5212,6 +5224,11 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
> num_connectors++;
> }
>
> + if (is_cpu_edp)
> + intel_crtc->cpu_transcoder = TRANSCODER_EDP;
> + else
> + intel_crtc->cpu_transcoder = pipe;
> +
> /* We are not sure yet this won't happen. */
> WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
> INTEL_PCH_TYPE(dev));
> @@ -7770,6 +7787,7 @@ static void intel_crtc_init(struct drm_device *dev, int
> pipe)
> /* Swap pipes & planes for FBC on pre-965 */
> intel_crtc->pipe = pipe;
> intel_crtc->plane = pipe;
> + intel_crtc->cpu_transcoder = pipe;
> if (IS_MOBILE(dev) && IS_GEN3(dev)) {
> DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
> intel_crtc->plane = !pipe;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 95cbd67..8f6eee5 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -185,6 +185,7 @@ struct intel_crtc {
> struct drm_crtc base;
> enum pipe pipe;
> enum plane plane;
> + enum transcoder cpu_transcoder;
> u8 lut_r[256], lut_g[256], lut_b[256];
> /*
> * Whether the crtc and the connected output pipeline is active. Implies
> @@ -491,6 +492,8 @@ extern struct drm_display_mode
> *intel_crtc_mode_get(struct drm_device *dev,
> struct drm_crtc *crtc);
> int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
> struct drm_file *file_priv);
> +extern enum transcoder pipe_to_cpu_transcoder(struct drm_i915_private
> *dev_priv,
> + enum pipe pipe);
> extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
> extern void intel_wait_for_pipe_off(struct drm_device *dev, int pipe);
>
> --
> 1.7.11.4
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
