On Sat, Feb 3, 2018 at 5:08 PM, Andy Lutomirski <l...@kernel.org> wrote: > On Sat, Feb 3, 2018 at 5:20 AM, Pandiyan, Dhinakaran > <dhinakaran.pandi...@intel.com> wrote: >> >> On Fri, 2018-02-02 at 19:18 +0000, Andy Lutomirski wrote: >>> I updated to 4.15, and the situation is much worse. With >>> enable_psr=1, the system survives for several seconds and then the >>> screen stops updating entirely. If I boot with i915.enable_psr=1, I >>> get to the Fedora login screen and then the system dies. If I set >>> enable_psr=1 using sysfs, it does a bit after the next resume. It >>> seems like it also sometimes hangs even worse a bit after the screen >>> stops updating, but it's hard to tell. >> >> The login screen freeze sounds like what I have. Does this system have >> DMC firmware? If yes, can you try this series >> https://patchwork.freedesktop.org/series/37598/. You'll only need >> patches 1,8,9 and 10. > > That fixes the hang. Feel free to add: > > Tested-by: Andy Lutomirski <l...@kernel.org> > > to the i915 parts. Also, any chance of getting it into the 4.15 stable > kernels?
Correction: I'm still getting a second or two of complete screen freezing every now and then. The kernel says: [69400.016524] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=19 end=20) time 198 us, min 1073, max 1079, scanline start 1068, end 1082 So something might still be a bit buggy. _______________________________________________ Intel-gfx mailing list Intelfirstname.lastname@example.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx