Regards

Shashank


On 2/6/2018 6:28 PM, Vidya Srinivas wrote:
From: Mahesh Kumar <[email protected]>

NV12 formats have two registers for DDB. Verify both the registers for
NV12 during verify_wm_state.
The commit message can add a little more details about how we are planning to program. You can pick the direct line from Bspec definition about how the UV buffer allocation should happen and how the Y buffer allocation.

v2: Addressed review comments by Maarten.

Signed-off-by: Mahesh Kumar <[email protected]>
Signed-off-by: Vidya Srinivas <[email protected]>
---
  drivers/gpu/drm/i915/intel_display.c |  2 +-
  drivers/gpu/drm/i915/intel_drv.h     |  1 +
  drivers/gpu/drm/i915/intel_pm.c      | 50 ++++++++++++++++++++++++++++--------
  3 files changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c 
b/drivers/gpu/drm/i915/intel_display.c
index e3a6a7f..5fc9255 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2621,7 +2621,7 @@ static int i9xx_format_to_fourcc(int format)
        }
  }
-static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
+int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
  {
        switch (format) {
        case PLANE_CTL_FORMAT_RGB_565:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 35ee715..ed33840 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1595,6 +1595,7 @@ u32 skl_plane_stride(const struct drm_framebuffer *fb, 
int plane,
  int skl_check_plane_surface(const struct intel_crtc_state *crtc_state,
                            struct intel_plane_state *plane_state);
  int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
+int skl_format_to_fourcc(int format, bool rgb_order, bool alpha);
/* intel_csr.c */
  void intel_csr_ucode_init(struct drm_i915_private *);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 5bff004..4c9a811 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3828,6 +3828,43 @@ static void skl_ddb_entry_init_from_hw(struct 
skl_ddb_entry *entry, u32 reg)
                entry->end += 1;
  }
+static void
+skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
+                          const enum pipe pipe,
+                          const enum plane_id plane_id,
+                          struct skl_ddb_allocation *ddb /* out */)
Is it me, or each of the input variables need one more space for alignment ?
+{
+       u32 val, val2 = 0;
+       int fourcc, pixel_format;
+
+       /* Cursor doesn't support NV12, so no extra calculation needed */
+       if (plane_id == PLANE_CURSOR) {
+               val = I915_READ(CUR_BUF_CFG(pipe));
+               skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+               return;
+       }
+
+       val = I915_READ(PLANE_CTL(pipe, plane_id));
+
+       /* No DDB allocated for disabled planes */
+       if (!(val & PLANE_CTL_ENABLE))
+               return;
+
+       pixel_format = val & PLANE_CTL_FORMAT_MASK;
+       fourcc = skl_format_to_fourcc(pixel_format,
+                                     val & PLANE_CTL_ORDER_RGBX,
+                                     val & PLANE_CTL_ALPHA_MASK);
+
+       val = I915_READ(PLANE_BUF_CFG(pipe, plane_id));
+       val2 = I915_READ(PLANE_NV12_BUF_CFG(pipe, plane_id));
+
+       if (fourcc == DRM_FORMAT_NV12) {
+               skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val2);
+               skl_ddb_entry_init_from_hw(&ddb->uv_plane[pipe][plane_id], val);
+       } else
please continue the curly brace for else case too
- Shashank
+               skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], val);
+}
+
  void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
                          struct skl_ddb_allocation *ddb /* out */)
  {
@@ -3844,16 +3881,9 @@ void skl_ddb_get_hw_state(struct drm_i915_private 
*dev_priv,
                if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
                        continue;
- for_each_plane_id_on_crtc(crtc, plane_id) {
-                       u32 val;
-
-                       if (plane_id != PLANE_CURSOR)
-                               val = I915_READ(PLANE_BUF_CFG(pipe, plane_id));
-                       else
-                               val = I915_READ(CUR_BUF_CFG(pipe));
-
-                       skl_ddb_entry_init_from_hw(&ddb->plane[pipe][plane_id], 
val);
-               }
+               for_each_plane_id_on_crtc(crtc, plane_id)
+                       skl_ddb_get_hw_plane_state(dev_priv, pipe,
+                                                  plane_id, ddb);
intel_display_power_put(dev_priv, power_domain);
        }

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to