L3Bank could be fused off in hardware for debug purpose, and it is possible that subslice is enabled while its corresponding L3Bank pairs are disabled. In such case, if MCR packet control register(0xFDC) is programed to point to a disabled bank pair, a MMIO read into L3Bank range will return 0 instead of correct values.
However, this is not going to be the case in any production silicon. Therefore, we only check at initialization and issue a warning should this really happen. References: HSDES#1405586840 v2: - use fls instead of find_last_bit (Chris) - use is_power_of_2() instead of counting bit set (Chris) v3: - rebase on latest tip v5: - Added references (Mika) - Move local variable into scope where they are used (Ursulin) - use a new local variable to reduce long line of code (Ursulin) v6: - Some coding style and use more local variables for clearer logic (Ursulin) v7: - Rebased. Cc: Oscar Mateo <[email protected]> Cc: Michel Thierry <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Signed-off-by: Yunwei Zhang <[email protected]> --- drivers/gpu/drm/i915/i915_reg.h | 4 ++++ drivers/gpu/drm/i915/intel_workarounds.c | 25 +++++++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index fb10602..6c9c01b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2709,6 +2709,10 @@ enum i915_power_well_id { #define GEN10_F2_SS_DIS_SHIFT 18 #define GEN10_F2_SS_DIS_MASK (0xf << GEN10_F2_SS_DIS_SHIFT) +#define GEN10_MIRROR_FUSE3 _MMIO(0x9118) +#define GEN10_L3BANK_PAIR_COUNT 4 +#define GEN10_L3BANK_MASK 0x0F + #define GEN8_EU_DISABLE0 _MMIO(0x9134) #define GEN8_EU_DIS0_S0_MASK 0xffffff #define GEN8_EU_DIS0_S1_SHIFT 24 diff --git a/drivers/gpu/drm/i915/intel_workarounds.c b/drivers/gpu/drm/i915/intel_workarounds.c index 8a2354e..fe1c908 100644 --- a/drivers/gpu/drm/i915/intel_workarounds.c +++ b/drivers/gpu/drm/i915/intel_workarounds.c @@ -647,8 +647,33 @@ static void cfl_gt_workarounds_apply(struct drm_i915_private *dev_priv) static void wa_init_mcr(struct drm_i915_private *dev_priv) { + const struct sseu_dev_info *sseu = &(INTEL_INFO(dev_priv)->sseu); u32 mcr; + /* + * L3Banks could be fused off in single slice scenario, however, if + * more than one slice is enabled, this should not happen. + */ + if (is_power_of_2(sseu->slice_mask)) { + /* + * WaProgramMgsrForL3BankSpecificMmioReads: + * read FUSE3 for enabled L3 Bank IDs, if L3 Bank matches + * enabled subslice, no need to redirect MCR packet + */ + u32 slice = fls(sseu->slice_mask); + u32 fuse3 = I915_READ(GEN10_MIRROR_FUSE3); + u8 ss_mask = sseu->subslice_mask[slice]; + + u8 enabled_mask = (ss_mask | ss_mask >> 4) & 0xf; + u8 disabled_mask = fuse3 & 0xf; + + /* + * Production silicon should have matched L3Bank and + * subslice enabled + */ + WARN_ON((enabled_mask & disabled_mask) != enabled_mask); + } + mcr = I915_READ(GEN8_MCR_SELECTOR); mcr = calculate_mcr(dev_priv, mcr); I915_WRITE(GEN8_MCR_SELECTOR, mcr); -- 2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
