WaProgramMgsrForCorrectSliceSpecificMmioReads dictate that before any MMIO
read into Slice/Subslice specific registers, MCR packet control
register(0xFDC) needs to be programmed to point to any enabled
slice/subslice pair. Otherwise, incorrect value will be returned.
However, that means each subsequent MMIO read will be forwarded to a
specific slice/subslice combination as read is unicast. This is OK since
slice/subslice specific register values are consistent in almost all cases
across slice/subslice. There are rare occasions such as INSTDONE that this
value will be dependent on slice/subslice combo, in such cases, we need to
program 0xFDC and recover this after. This is already covered by
read_subslice_reg.
Also, 0xFDC will lose its information after TDR/engine reset/power state
change.
References: HSD#1405586840, BSID#0575
v2:
- use fls() instead of find_last_bit() (Chris)
- added INTEL_SSEU to extract sseu from device info. (Chris)
v3:
- rebase on latest tip
v5:
- Added references (Mika)
- Change the ordered of passing arguments and etc. (Ursulin)
v7:
- Rebased.
v8:
- Reviewed by Oscar
- Store default MCR value instead of calculate on the run. (Oscar)
Cc: Oscar Mateo <oscar.ma...@intel.com>
Cc: Michel Thierry <michel.thie...@intel.com>
Cc: Joonas Lahtinen <joonas.lahti...@linux.intel.com>
Cc: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuopp...@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursu...@linux.intel.com>
Signed-off-by: Yunwei Zhang <yunwei.zh...@intel.com>
Reviewed-by: Oscar Mateo <oscar.ma...@intel.com>
---
drivers/gpu/drm/i915/intel_device_info.c | 33 ++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_device_info.h | 3 +++
drivers/gpu/drm/i915/intel_engine_cs.c | 14 +++++++++++---
3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_device_info.c
b/drivers/gpu/drm/i915/intel_device_info.c
index a32ba72..2243a23 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -719,6 +719,36 @@ static u32 read_timestamp_frequency(struct
drm_i915_private *dev_priv)
return 0;
}
+static void wa_init_mcr(struct intel_device_info *info)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(info, struct drm_i915_private, info);
+ u32 mcr;
+ u32 mcr_slice_subslice_mask;
+ u32 mcr_slice_subslice_select;
+ u32 slice = fls(info->sseu.slice_mask);
+ u32 subslice = fls(info->sseu.subslice_mask[slice]);
+
+ if (INTEL_GEN(dev_priv) >= 11) {
+ mcr_slice_subslice_mask = GEN11_MCR_SLICE_MASK |
+ GEN11_MCR_SUBSLICE_MASK;
+ mcr_slice_subslice_select = GEN11_MCR_SLICE(slice) |
+ GEN11_MCR_SUBSLICE(subslice);
+ } else {
+ mcr_slice_subslice_mask = GEN8_MCR_SLICE_MASK |
+ GEN8_MCR_SUBSLICE_MASK;
+ mcr_slice_subslice_select = GEN8_MCR_SLICE(slice) |
+ GEN8_MCR_SUBSLICE(subslice);
+ }
+
+ mcr = I915_READ(GEN8_MCR_SELECTOR);
+ mcr &= ~mcr_slice_subslice_mask;
+ if (INTEL_GEN(dev_priv) >= 10)
+ mcr |= mcr_slice_subslice_select;
+
+ info->mcr = mcr;
+}
+
/**
* intel_device_info_runtime_init - initialize runtime info
* @info: intel device info struct
@@ -851,6 +881,9 @@ void intel_device_info_runtime_init(struct
intel_device_info *info)
else if (INTEL_INFO(dev_priv)->gen >= 11)
gen11_sseu_info_init(dev_priv);
+ /* WaProgramMgsrForCorrectSliceSpecificMmioReads:cnl,icl */
+ wa_init_mcr(info);
+
/* Initialize command stream timestamp frequency */
info->cs_timestamp_frequency_khz = read_timestamp_frequency(dev_priv);
}
diff --git a/drivers/gpu/drm/i915/intel_device_info.h
b/drivers/gpu/drm/i915/intel_device_info.h
index 933e316..5449a15 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -176,6 +176,9 @@ struct intel_device_info {
/* Slice/subslice/EU info */
struct sseu_dev_info sseu;
+ /* MCR packet control */
+ u32 mcr;
+
u32 cs_timestamp_frequency_khz;
struct color_luts {
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c
b/drivers/gpu/drm/i915/intel_engine_cs.c
index 1a83707..08798f2 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -831,18 +831,26 @@ read_subslice_reg(struct drm_i915_private *dev_priv, int
slice,
intel_uncore_forcewake_get__locked(dev_priv, fw_domains);
mcr = I915_READ_FW(GEN8_MCR_SELECTOR);
+
/*
* The HW expects the slice and sublice selectors to be reset to 0
- * after reading out the registers.
+ * before GEN10 or to a enabled s/ss post GEN10 after reading out the
+ * registers.
*/
- WARN_ON_ONCE(mcr & mcr_slice_subslice_mask);
+ WARN_ON_ONCE(mcr != dev_priv->info.mcr);
mcr &= ~mcr_slice_subslice_mask;
mcr |= mcr_slice_subslice_select;
I915_WRITE_FW(GEN8_MCR_SELECTOR, mcr);
ret = I915_READ_FW(reg);
- mcr &= ~mcr_slice_subslice_mask;
+ /*
+ * WaProgramMgsrForCorrectSliceSpecificMmioReads:cnl,icl
+ * expects mcr to be programed to a enabled slice/subslice pair
+ * before any MMIO read into slice/subslice register
+ */
+ mcr = dev_priv->info.mcr;
+
I915_WRITE_FW(GEN8_MCR_SELECTOR, mcr);
intel_uncore_forcewake_put__locked(dev_priv, fw_domains);
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
