Only enables the interrupt and puts a irq handler into place, doesn't do anything yet.
Unfortunately there's no gmbus interrupt support for gen2/3 (safe for pnv, but there the irq is marked as "Test mode"). v2: Wire up the irq handler for vlv and gen4 properly. v3: i915_enable_pipestat expects the mask bit, not the status bits ... and for added hilarity those are rather inconsistently named. Signed-off-by: Daniel Vetter <[email protected]> --- drivers/gpu/drm/i915/i915_irq.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 6ba94db..5062501 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -528,6 +528,11 @@ static void gen6_queue_rps_work(struct drm_i915_private *dev_priv, queue_work(dev_priv->wq, &dev_priv->rps.work); } +static void gmbus_irq_handler(struct drm_device *dev) +{ + DRM_DEBUG_DRIVER("GMBUS interrupt\n"); +} + static irqreturn_t valleyview_irq_handler(int irq, void *arg) { struct drm_device *dev = (struct drm_device *) arg; @@ -593,6 +598,9 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) I915_READ(PORT_HOTPLUG_STAT); } + if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) + gmbus_irq_handler(dev); + if (pm_iir & GEN6_PM_DEFERRED_EVENTS) gen6_queue_rps_work(dev_priv, pm_iir); @@ -619,7 +627,7 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir) SDE_AUDIO_POWER_SHIFT); if (pch_iir & SDE_GMBUS) - DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n"); + gmbus_irq_handler(dev); if (pch_iir & SDE_AUDIO_HDCP_MASK) DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n"); @@ -665,7 +673,7 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir) DRM_DEBUG_DRIVER("AUX channel interrupt\n"); if (pch_iir & SDE_GMBUS_CPT) - DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n"); + gmbus_irq_handler(dev); if (pch_iir & SDE_AUDIO_CP_REQ_CPT) DRM_DEBUG_DRIVER("Audio CP request interrupt\n"); @@ -1875,12 +1883,14 @@ static int ironlake_irq_postinstall(struct drm_device *dev) hotplug_mask = (SDE_CRT_HOTPLUG_CPT | SDE_PORTB_HOTPLUG_CPT | SDE_PORTC_HOTPLUG_CPT | - SDE_PORTD_HOTPLUG_CPT); + SDE_PORTD_HOTPLUG_CPT | + SDE_GMBUS_CPT); } else { hotplug_mask = (SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG | + SDE_GMBUS | SDE_AUX_MASK); } @@ -1940,7 +1950,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev) hotplug_mask = (SDE_CRT_HOTPLUG_CPT | SDE_PORTB_HOTPLUG_CPT | SDE_PORTC_HOTPLUG_CPT | - SDE_PORTD_HOTPLUG_CPT); + SDE_PORTD_HOTPLUG_CPT | + SDE_GMBUS_CPT); dev_priv->pch_irq_mask = ~hotplug_mask; I915_WRITE(SDEIIR, I915_READ(SDEIIR)); @@ -1994,6 +2005,7 @@ static int valleyview_irq_postinstall(struct drm_device *dev) POSTING_READ(VLV_IER); i915_enable_pipestat(dev_priv, 0, pipestat_enable); + i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE); i915_enable_pipestat(dev_priv, 1, pipestat_enable); I915_WRITE(VLV_IIR, 0xffffffff); @@ -2478,6 +2490,7 @@ static int i965_irq_postinstall(struct drm_device *dev) dev_priv->pipestat[0] = 0; dev_priv->pipestat[1] = 0; + i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE); /* * Enable some error detection, note the instruction error mask @@ -2631,6 +2644,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) if (blc_event || (iir & I915_ASLE_INTERRUPT)) intel_opregion_asle_intr(dev); + if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) + gmbus_irq_handler(dev); + /* With MSI, interrupts are only generated when iir * transitions from zero to nonzero. If another bit got * set while we were handling the existing iir bits, then -- 1.7.11.7 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
