On KBL, WHL RVPs, booting up with an external display connected, triggers
below warning, when the BiOS brings up the external display too.
This warning is not seen during hotplug.
[ 3.615226] ------------[ cut here ]------------
[ 3.619829] plane 1A assertion failure (expected on, current off)
[ 3.632039] WARNING: CPU: 2 PID: 354 at
drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
[ 3.633920] iwlwifi 0000:00:14.3: loaded firmware version 38.c0e03d94.0
op_mode iwlmvm
[ 3.647157] Modules linked in: iwlwifi cfg80211 btusb btrtl btbcm btintel
bluetooth ecdh_generic
[ 3.647163] CPU: 2 PID: 354 Comm: frecon Not tainted
4.17.0-rc7-50176-g655af12d39c2 #3
[ 3.647165] Hardware name: Intel Corporation CoffeeLake Client
Platform/WhiskeyLake U DDR4 ERB, BIOS CNLSFWR1.R00.X140.B00.1804040304
04/04/2018
[ 3.684509] RIP: 0010:assert_plane+0x71/0xbb
[ 3.764451] Call Trace:
[ 3.766888] intel_atomic_commit_tail+0xa97/0xb77
[ 3.771569] intel_atomic_commit+0x26a/0x279
[ 3.771572] drm_atomic_helper_set_config+0x5c/0x76
[ 3.780670] __drm_mode_set_config_internal+0x66/0x109
[ 3.780672] drm_mode_setcrtc+0x4c9/0x5cc
[ 3.780674] ? drm_mode_getcrtc+0x162/0x162
[ 3.789774] ? drm_mode_getcrtc+0x162/0x162
[ 3.798108] drm_ioctl_kernel+0x8d/0xe4
[ 3.801926] drm_ioctl+0x27d/0x368
[ 3.805311] ? drm_mode_getcrtc+0x162/0x162
[ 3.805314] ? selinux_file_ioctl+0x14e/0x199
[ 3.805317] vfs_ioctl+0x21/0x2f
[ 3.813812] do_vfs_ioctl+0x491/0x4b4
[ 3.813813] ? security_file_ioctl+0x37/0x4b
[ 3.813816] ksys_ioctl+0x55/0x75
[ 3.820672] __x64_sys_ioctl+0x1a/0x1e
[ 3.820674] do_syscall_64+0x51/0x5f
[ 3.820678] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 3.828221] RIP: 0033:0x7b5e04953967
[ 3.835504] RSP: 002b:00007fff2eafb6f8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 3.835505] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007b5e04953967
[ 3.835505] RDX: 00007fff2eafb730 RSI: 00000000c06864a2 RDI: 000000000000000f
[ 3.835506] RBP: 00007fff2eafb720 R08: 0000000000000000 R09: 0000000000000000
[ 3.835507] R10: 0000000000000070 R11: 0000000000000246 R12: 000000000000000f
[ 3.879988] R13: 000056bc9dd7d210 R14: 00007fff2eafb730 R15: 00000000c06864a2
[ 3.887081] Code: 48 c7 c7 06 71 a5 be 84 c0 48 c7 c2 06 fd a3 be 48 89 f9
48 0f 44 ca 84 db 48 0f 45 d7 48 c7 c7 df d3 a4 be 31 c0 e8 af a0 c0 ff <0f> 0b
eb 2b 48 c7 c7 06 fd a3 be 84 c0 48 c7 c2 06 71 a5 be 48
[ 3.905845] WARNING: CPU: 2 PID: 354 at
drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
[ 3.920964] ---[ end trace dac692f4ac46391a ]---
The warning is seen when mode_setcrtc() is called for pipeB
during bootup and before we get a mode_setcrtc() for pipeA,
while doing update_crtcs() in intel_atomic_commit_tail().
Now since, plane1A is still active after commit, update_crtcs()
is done for pipeA and eventually update_plane() for plane1A.
intel_plane_state->ctl for plane1A is not updated since set_modecrtc() is
called for pipeB. So intel_plane_state->ctl for plane 1A will be 0x0.
So doing an update_plane() for plane1A, will result in clearing
PLANE_CTL_ENABLE bit, and hence the warning.
To fix this warning, force all active planes to recompute their states
in probe.
Signed-off-by: Azhar Shaikh <azhar.sha...@intel.com>
---
Changes in v4:
- Handle locking in intel_initial_commit()
- Move the for loop inside intel_initial_commit() so that
drm_atomic_commit() is called only once
- Call intel_initial_commit() only for more than one active crtc on boot.
- Save the return value of intel_initial_commit() and print a message in
case of an error
Changes in v3:
- Add comments
Changes in v2:
- Force all planes to recompute their states.(Ville Syrjälä)
- Update the commit message
drivers/gpu/drm/i915/intel_display.c | 81 +++++++++++++++++++++++++++++++++++-
1 file changed, 79 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 3709fa1b6318..40bdb28aa2a5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15092,12 +15092,76 @@ static void intel_update_fdi_pll_freq(struct
drm_i915_private *dev_priv)
DRM_DEBUG_DRIVER("FDI PLL freq=%d\n", dev_priv->fdi_pll_freq);
}
+static int intel_initial_commit(struct drm_device *dev)
+{
+ struct drm_atomic_state *state = NULL;
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_crtc_state *crtc_state;
+ struct intel_crtc *intel_crtc;
+ int ret = 0;
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+retry:
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ goto unlock;
+
+ state->acquire_ctx = &ctx;
+
+ ret = drm_modeset_lock_all_ctx(dev, &ctx);
+ if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(&ctx);
+ goto retry;
+ } else if (WARN_ON(ret)) {
+ goto unlock;
+ }
+
+ for_each_intel_crtc(dev, intel_crtc) {
+ struct drm_crtc *crtc = &intel_crtc->base;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state)) {
+ ret = PTR_ERR(crtc_state);
+ goto out;
+ }
+
+ if (crtc_state->active) {
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ goto out;
+ }
+ }
+
+ ret = drm_atomic_commit(state);
+ if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(&ctx);
+ goto retry;
+ }
+
+out:
+ if (state) {
+ drm_atomic_state_put(state);
+ state = NULL;
+ }
+
+unlock:
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ return ret;
+}
+
int intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
enum pipe pipe;
struct intel_crtc *crtc;
+ u16 num_active_crtcs;
+ int ret;
dev_priv->modeset_wq = alloc_ordered_workqueue("i915_modeset", 0);
@@ -15172,8 +15236,6 @@ int intel_modeset_init(struct drm_device *dev)
INTEL_INFO(dev_priv)->num_pipes > 1 ? "s" : "");
for_each_pipe(dev_priv, pipe) {
- int ret;
-
ret = intel_crtc_init(dev_priv, pipe);
if (ret) {
drm_mode_config_cleanup(dev);
@@ -15203,6 +15265,8 @@ int intel_modeset_init(struct drm_device *dev)
if (!crtc->active)
continue;
+ else
+ num_active_crtcs++;
/*
* Note that reserving the BIOS fb up front prevents us
@@ -15222,6 +15286,19 @@ int intel_modeset_init(struct drm_device *dev)
}
/*
+ * Only in case of more than one active crtc in probe, force
+ * all active planes to recompute their states. So that on
+ * mode_setcrtc after probe, all the intel_plane_state variables
+ * are already calculated and there is no assert_plane warnings
+ * during bootup.
+ */
+ if (num_active_crtcs > 1) {
+ ret = intel_initial_commit(dev);
+ if (ret)
+ DRM_DEBUG_KMS("Initial commit in probe failed.\n");
+ }
+
+ /*
* Make sure hardware watermarks really match the state we read out.
* Note that we need to do this after reconstructing the BIOS fb's
* since the watermark calculation done here will use pstate->fb.
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
