> -----Original Message----- > From: Ville Syrjälä [mailto:[email protected]] > Sent: Friday, January 18, 2013 6:46 PM > To: Wang, Xingchao > Cc: [email protected]; [email protected]; Zanoni, Paulo R > Subject: Re: [Intel-gfx] [PATCH v2] drm/i915: HDMI/DP - ELD info refresh > support for Haswell > > On Fri, Jan 18, 2013 at 10:51:55AM +0800, Wang Xingchao wrote: > > ELD info should be updated dynamically according to hot plug event. > > For haswell chip, clear/set the eld valid bit and output enable bit > > from callback intel_disable/eanble_ddi(). > > Hmm. Is it OK to set the ELD valid bit if the ELD hasn't actually been > written?
This triggers an unsolicited event to ALSA driver which continue to read ELD info. > > And besides these bits are already set by haswell_write_eld(). Intel_disable/enable_ddi() was called even after haswell_write_eld(), so we need set the bits again. Thanks --xingchao > > > > > Signed-off-by: Wang Xingchao <[email protected]> > > --- > > drivers/gpu/drm/i915/intel_ddi.c | 18 ++++++++++++++++++ > > 1 file changed, 18 insertions(+) > > > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c > > b/drivers/gpu/drm/i915/intel_ddi.c > > index f02b3fe..7ce4728 100644 > > --- a/drivers/gpu/drm/i915/intel_ddi.c > > +++ b/drivers/gpu/drm/i915/intel_ddi.c > > @@ -1274,10 +1274,14 @@ static void intel_ddi_post_disable(struct > > intel_encoder *intel_encoder) static void intel_enable_ddi(struct > > intel_encoder *intel_encoder) { > > struct drm_encoder *encoder = &intel_encoder->base; > > + struct drm_crtc *crtc = encoder->crtc; > > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > > + int pipe = intel_crtc->pipe; > > struct drm_device *dev = encoder->dev; > > struct drm_i915_private *dev_priv = dev->dev_private; > > enum port port = intel_ddi_get_encoder_port(intel_encoder); > > int type = intel_encoder->type; > > + int tmp; > > > > if (type == INTEL_OUTPUT_HDMI) { > > /* In HDMI/DVI mode, the port width, and swing/emphasis values > @@ > > -1290,18 +1294,32 @@ static void intel_enable_ddi(struct intel_encoder > > *intel_encoder) > > > > ironlake_edp_backlight_on(intel_dp); > > } > > + > > + tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); > > + tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * > 4)); > > + I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); > > } > > > > static void intel_disable_ddi(struct intel_encoder *intel_encoder) { > > struct drm_encoder *encoder = &intel_encoder->base; > > + struct drm_crtc *crtc = encoder->crtc; > > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); > > + int pipe = intel_crtc->pipe; > > int type = intel_encoder->type; > > + struct drm_device *dev = encoder->dev; > > + struct drm_i915_private *dev_priv = dev->dev_private; > > + int tmp; > > > > if (type == INTEL_OUTPUT_EDP) { > > struct intel_dp *intel_dp = enc_to_intel_dp(encoder); > > > > ironlake_edp_backlight_off(intel_dp); > > } > > + > > + tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); > > + tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * > 4)); > > + I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); > > } > > > > int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv) > > -- > > 1.7.9.5 > > > > _______________________________________________ > > Intel-gfx mailing list > > [email protected] > > http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Ville Syrjälä > Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
