On Mon, Oct 22, 2018 at 03:51:08PM +0300, Jani Nikula wrote:
> On Fri, 19 Oct 2018, Ville Syrjala <ville.syrj...@linux.intel.com> wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > Let's make sure the DSI port is actually on before we go
> > poking at the plane register to determine which way
> > it's rotated. Otherwise we could be looking at a plane
> > that is feeding a HDMI port for instance.
> >
> > And in order to read the plane register we need the power
> > well to be on. Make sure that is indeed the case. We'll
> > also make sure the plane is actually enabled before we
> > trust the rotation bit to tell us the truth.
> >
> > Cc: Hans de Goede <hdego...@redhat.com>
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/vlv_dsi.c | 53 ++++++++++++++++++++++++++--------
> >  1 file changed, 41 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> > index dbca30460a6b..893839ea0ff9 100644
> > --- a/drivers/gpu/drm/i915/vlv_dsi.c
> > +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> > @@ -1668,27 +1668,56 @@ static const struct drm_connector_funcs 
> > intel_dsi_connector_funcs = {
> >     .atomic_duplicate_state = intel_digital_connector_duplicate_state,
> >  };
> >  
> > -static int intel_dsi_get_panel_orientation(struct intel_connector 
> > *connector)
> > +static enum drm_panel_orientation
> > +vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector)
> >  {
> >     struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > -   int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> > -   enum i9xx_plane_id i9xx_plane;
> > +   struct intel_encoder *encoder = connector->encoder;
> > +   enum intel_display_power_domain power_domain;
> > +   enum drm_panel_orientation orientation;
> > +   struct intel_plane *plane;
> > +   struct intel_crtc *crtc;
> > +   enum pipe pipe;
> >     u32 val;
> >  
> > -   if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> > -           if (connector->encoder->crtc_mask == BIT(PIPE_B))
> > -                   i9xx_plane = PLANE_B;
> > -           else
> > -                   i9xx_plane = PLANE_A;
> > +   if (!encoder->get_hw_state(encoder, &pipe))
> > +           return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> >  
> > -           val = I915_READ(DSPCNTR(i9xx_plane));
> > -           if (val & DISPPLANE_ROTATE_180)
> > -                   orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> > -   }
> > +   crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
> > +   plane = to_intel_plane(crtc->base.primary);
> > +
> > +   power_domain = POWER_DOMAIN_PIPE(pipe);
> > +   if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> > +           return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +
> > +   val = I915_READ(DSPCNTR(plane->i9xx_plane));
> > +
> > +   if (!(val & DISPLAY_PLANE_ENABLE))
> > +           orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +   else if (val & DISPPLANE_ROTATE_180)
> > +           orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> > +   else
> > +           orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> > +
> > +   intel_display_power_put(dev_priv, power_domain);
> >  
> >     return orientation;
> >  }
> >  
> > +static int intel_dsi_get_panel_orientation(struct intel_connector 
> > *connector)
> > +{
> > +   struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > +   enum drm_panel_orientation orientation;
> > +
> > +   if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> > +           orientation = vlv_dsi_get_hw_panel_orientation(connector);
> > +           if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> > +                   return orientation;
> > +   }
> > +
> > +   return DRM_MODE_PANEL_ORIENTATION_NORMAL;
> > +}
> 
> Long term I think this should be shoved to intel_dsi.c, the resurrected
> dumping ground for platform independent DSI code. But I'm fine with
> landing it here first and moving later as the only user is still here.

I suppose I could do it more like that from the start. That would
make it easier to revert the "drop the hw readout path" patch should
it become necessary.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to