On Thu, Nov 01, 2018 at 11:55:57AM -0700, Anusha Srivatsa wrote:
> The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset
> from the base - which is the FLexi IO Adaptor. Lets follow the
> offset calculation while accessing these registers.
> 
> v2:
> - Follow spec for numbering - s/0/1(Lucas)
> - s/FIA_1/FIA1_BASE (Anusha)
> 
> v3:
> - Remove register offset defines. (Jani)
> - Update comment. (Anusha)
> 
> v4: rebase. Remove comment.(Lucas)
> 
> Cc: Jani Nikula <[email protected]>
> Cc: Lucas De Marchi <[email protected]>
> Signed-off-by: Anusha Srivatsa <[email protected]>
> Reviewed-by: Lucas De Marchi <[email protected]>

pushed to dinq. thanks for patch and review.

> ---
>  drivers/gpu/drm/i915/i915_reg.h | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6c7df179da28..9744cb59acd3 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2057,8 +2057,10 @@ enum i915_power_well_id {
>  #define BXT_PORT_CL2CM_DW6(phy)              _BXT_PHY((phy), 
> _PORT_CL2CM_DW6_BC)
>  #define   DW6_OLDO_DYN_PWR_DOWN_EN   (1 << 28)
>  
> +#define FIA1_BASE                    0x163000
> +
>  /* ICL PHY DFLEX registers */
> -#define PORT_TX_DFLEXDPMLE1          _MMIO(0x1638C0)
> +#define PORT_TX_DFLEXDPMLE1          _MMIO(FIA1_BASE + 0x008C0)
>  #define   DFLEXDPMLE1_DPMLETC_MASK(tc_port)  (0xf << (4 * (tc_port)))
>  #define   DFLEXDPMLE1_DPMLETC_ML0(tc_port)   (1 << (4 * (tc_port)))
>  #define   DFLEXDPMLE1_DPMLETC_ML1_0(tc_port) (3 << (4 * (tc_port)))
> @@ -11091,17 +11093,17 @@ enum skl_power_gate {
>                                               
> _ICL_DSC1_RC_BUF_THRESH_1_UDW_PB, \
>                                               
> _ICL_DSC1_RC_BUF_THRESH_1_UDW_PC)
>  
> -#define PORT_TX_DFLEXDPSP                    _MMIO(0x1638A0)
> +#define PORT_TX_DFLEXDPSP                    _MMIO(FIA1_BASE + 0x008A0)
>  #define   TC_LIVE_STATE_TBT(tc_port)         (1 << ((tc_port) * 8 + 6))
>  #define   TC_LIVE_STATE_TC(tc_port)          (1 << ((tc_port) * 8 + 5))
>  #define   DP_LANE_ASSIGNMENT_SHIFT(tc_port)  ((tc_port) * 8)
>  #define   DP_LANE_ASSIGNMENT_MASK(tc_port)   (0xf << ((tc_port) * 8))
>  #define   DP_LANE_ASSIGNMENT(tc_port, x)     ((x) << ((tc_port) * 8))
>  
> -#define PORT_TX_DFLEXDPPMS                           _MMIO(0x163890)
> +#define PORT_TX_DFLEXDPPMS                           _MMIO(FIA1_BASE + 
> 0x00890)
>  #define   DP_PHY_MODE_STATUS_COMPLETED(tc_port)              (1 << (tc_port))
>  
> -#define PORT_TX_DFLEXDPCSSS                          _MMIO(0x163894)
> +#define PORT_TX_DFLEXDPCSSS                  _MMIO(FIA1_BASE + 0x00894)
>  #define   DP_PHY_MODE_STATUS_NOT_SAFE(tc_port)               (1 << (tc_port))
>  
>  #endif /* _I915_REG_H_ */
> -- 
> 2.17.1
> 
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to