On Tue, Dec 04, 2018 at 12:19:26PM +0200, Jani Nikula wrote:
> Commit 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder
> state") clobbers the previously read TRANS_DDI_FUNC_CTL_EDP register
> contents with TRANS_DDI_FUNC_CTL_DSI0 contents. Fix the state readout,
> and handle DSI 1 while at it.
>
> Use a bitmask for iterating and logging transcoders, because the allowed
> combinations are a bit funky.
>
> Fixes: 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder
> state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108928
> Cc: Ville Syrjala <[email protected]>
> Cc: Madhav Chauhan <[email protected]>
> Signed-off-by: Jani Nikula <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_display.c | 48
> ++++++++++++++++++++----------------
> 1 file changed, 27 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index a2584f977ab1..64b0ecd538fd 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9476,13 +9476,18 @@ static bool hsw_get_transcoder_state(struct
> intel_crtc *crtc,
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> enum intel_display_power_domain power_domain;
> + unsigned long panel_transcoder_mask = BIT(TRANSCODER_EDP);
> + unsigned long enabled_panel_transcoders = 0;
> + enum transcoder panel_transcoder;
> u32 tmp;
> - bool is_dsi = false;
> - bool is_edp = false;
> +
> + if (IS_ICELAKE(dev_priv))
> + panel_transcoder_mask |=
> + BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1);
>
> /*
> * The pipe->transcoder mapping is fixed with the exception of the eDP
> - * transcoder handled below.
> + * and DSI transcoders handled below.
> */
> pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
>
> @@ -9490,23 +9495,22 @@ static bool hsw_get_transcoder_state(struct
> intel_crtc *crtc,
> * XXX: Do intel_display_power_get_if_enabled before reading this (for
> * consistency and less surprising code; it's in always on power).
> */
> - tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
> - if (tmp & TRANS_DDI_FUNC_ENABLE)
> - is_edp = true;
> + for_each_set_bit(panel_transcoder, &panel_transcoder_mask, 32) {
nit: BITS_PER_LONG or I915_MAX_TRANSCODERS?
> + enum pipe trans_pipe;
>
> - if (IS_ICELAKE(dev_priv)) {
> - tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_DSI_0));
> - if (tmp & TRANS_DDI_FUNC_ENABLE)
> - is_dsi = true;
> - }
> + tmp = I915_READ(TRANS_DDI_FUNC_CTL(panel_transcoder));
> + if (!(tmp & TRANS_DDI_FUNC_ENABLE))
> + continue;
>
> - WARN_ON(is_edp && is_dsi);
> + /* Log all enabled ones, only use the first one */
> + enabled_panel_transcoders |= BIT(panel_transcoder);
> + if (enabled_panel_transcoders != BIT(panel_transcoder))
> + continue;
nit: As you explained for DSI dual mode both transcoders are needed and
we don't support atm two separate DSI ports. A code comment about this
would be nice. Maybe for the two DSI port case we should also warn below.
With or without the nits:
Reviewed-by: Imre Deak <[email protected]>
>
> - if (is_edp || is_dsi) {
> - enum pipe trans_pipe;
> switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
> default:
> - WARN(1, "unknown pipe linked to edp transcoder\n");
> + WARN(1, "unknown pipe linked to transcoder %s\n",
> + transcoder_name(panel_transcoder));
> /* fall through */
> case TRANS_DDI_EDP_INPUT_A_ONOFF:
> case TRANS_DDI_EDP_INPUT_A_ON:
> @@ -9520,14 +9524,16 @@ static bool hsw_get_transcoder_state(struct
> intel_crtc *crtc,
> break;
> }
>
> - if (trans_pipe == crtc->pipe) {
> - if (is_edp)
> - pipe_config->cpu_transcoder = TRANSCODER_EDP;
> - else if (is_dsi)
> - pipe_config->cpu_transcoder = TRANSCODER_DSI_0;
> - }
> + if (trans_pipe == crtc->pipe)
> + pipe_config->cpu_transcoder = panel_transcoder;
> }
>
> + /*
> + * Valid combos: none, eDP, DSI0, DSI1, DSI0+DSI1
> + */
> + WARN_ON((enabled_panel_transcoders & BIT(TRANSCODER_EDP)) &&
> + enabled_panel_transcoders != BIT(TRANSCODER_EDP));
> +
> power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
> if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
> return false;
> --
> 2.11.0
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
