>-----Original Message-----
>From: C, Ramalingam
>Sent: Thursday, January 31, 2019 12:30 PM
>To: [email protected]; [email protected];
>[email protected]; Winkler, Tomas <[email protected]>; Shankar,
>Uma <[email protected]>
>Cc: C, Ramalingam <[email protected]>
>Subject: [PATCH v10 33/40] misc/mei/hdcp: Verify M_prime
>
>Request to ME to verify the M_Prime received from the HDCP sink.
>
>ME FW will calculate the M and compare with M_prime received as part of
>RepeaterAuth_Stream_Ready, which is HDCP2.2 protocol msg.
>
>On successful completion of this stage, downstream propagation of the stream
>management info is completed.
>
>v2: Rebased.
>v3:
> cldev is passed as first parameter [Tomas]
> Redundant comments and cast are removed [Tomas]
>v4:
> %zd for ssize_t [Alexander]
> %s/return -1/return -EIO [Alexander]
> endianness conversion func is moved to drm_hdcp.h [Uma]
>v5: Rebased.
>v6:
> Collected the Rb-ed by.
> Rebasing.
>v7:
> Adjust to the new mei interface.
> Fix for Kdoc.
>v8:
> K-Doc addition. [Tomas]
> drm_hdcp2_u32_to_seq_num() is used for u32 to seq_num.
>
>Signed-off-by: Ramalingam C <[email protected]>
>Reviewed-by: Uma Shankar <[email protected]>
Latest set looks ok. You can keep the RB.
>---
> drivers/misc/mei/hdcp/mei_hdcp.c | 66
>+++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 65 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
>b/drivers/misc/mei/hdcp/mei_hdcp.c
>index c157c18371b4..91f7b08d1df1 100644
>--- a/drivers/misc/mei/hdcp/mei_hdcp.c
>+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
>@@ -523,6 +523,70 @@ mei_repeater_check_flow_prepare_ack(struct device
>*dev,
> return 0;
> }
>
>+/**
>+ * mei_verify_mprime() - Verify mprime.
>+ * @dev: device corresponding to the mei_cl_device
>+ * @hdcp_data: Intel HW specific hdcp data
>+ * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification.
>+ *
>+ * Return: 0 on Success, <0 on Failure
>+ */
>+static int mei_verify_mprime(struct device *dev, struct hdcp_port_data *data,
>+ struct hdcp2_rep_stream_ready *stream_ready) {
>+ struct wired_cmd_repeater_auth_stream_req_in
>+ verify_mprime_in = { { 0 } };
>+ struct wired_cmd_repeater_auth_stream_req_out
>+ verify_mprime_out = { { 0 } };
>+ struct mei_cl_device *cldev;
>+ ssize_t byte;
>+
>+ if (!dev || !stream_ready || !data)
>+ return -EINVAL;
>+
>+ cldev = to_mei_cl_device(dev);
>+
>+ verify_mprime_in.header.api_version = HDCP_API_VERSION;
>+ verify_mprime_in.header.command_id =
>WIRED_REPEATER_AUTH_STREAM_REQ;
>+ verify_mprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
>+ verify_mprime_in.header.buffer_len =
>+
> WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN;
>+
>+ verify_mprime_in.port.integrated_port_type = data->port_type;
>+ verify_mprime_in.port.physical_port =
>+(u8)GET_MEI_DDI_INDEX(data->port);
>+
>+ memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
>+ HDCP_2_2_MPRIME_LEN);
>+ drm_hdcp2_u32_to_seq_num(verify_mprime_in.seq_num_m, data-
>>seq_num_m);
>+ memcpy(verify_mprime_in.streams, data->streams,
>+ (data->k * sizeof(struct hdcp2_streamid_type)));
>+
>+ verify_mprime_in.k = __swab16(data->k);
>+
>+ byte = mei_cldev_send(cldev, (u8 *)&verify_mprime_in,
>+ sizeof(verify_mprime_in));
>+ if (byte < 0) {
>+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
>+ return byte;
>+ }
>+
>+ byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out,
>+ sizeof(verify_mprime_out));
>+ if (byte < 0) {
>+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
>+ return byte;
>+ }
>+
>+ if (verify_mprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
>+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
>+ WIRED_REPEATER_AUTH_STREAM_REQ,
>+ verify_mprime_out.header.status);
>+ return -EIO;
>+ }
>+
>+ return 0;
>+}
>+
> static __attribute__((unused))
> struct i915_hdcp_component_ops mei_hdcp_ops = {
> .owner = THIS_MODULE,
>@@ -534,7 +598,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
> .verify_lprime = mei_verify_lprime,
> .get_session_key = mei_get_session_key,
> .repeater_check_flow_prepare_ack =
>mei_repeater_check_flow_prepare_ack,
>- .verify_mprime = NULL,
>+ .verify_mprime = mei_verify_mprime,
> .enable_hdcp_authentication = NULL,
> .close_hdcp_session = NULL,
> };
>--
>2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
